DIGITRON SEMICONDUCTORS MCR64 SERIES SILICON CONTROLLED RECTIFIER Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Peak repetitive forward and reverse blocking voltage (TJ = 25 to +125°C, gate open) MCR64-1 MCR64-2 MCR64-3 MCR64-4 MCR64-5 MCR64-6 MCR64-7 MCR64-8 MCR64-9 MCR64-10 Value Unit (1) VRRM, VDRM Non-repetitive peak reverse blocking voltage (t ≤ 5ms)(1) MCR64-1 MCR64-2 MCR64-3 MCR64-4 MCR64-5 MCR64-6 MCR64-7 MCR64-8 MCR64-9 MCR64-10 VRSM Forward current RMS IT(RMS) Peak surge current (one cycle, 60Hz, TC = -40 to +125°C) ITSM Circuit fusing considerations (t = 8.3ms) I2t Peak gate power 25 50 100 200 300 400 500 600 700 800 Volts 35 75 150 300 400 500 600 700 800 900 Volts 55 Amps Amps 550 A2 s 1255 PGM 20 Watts PG(AV) 0.5 Watts Peak forward gate current IGM 2 Amps Forward peak gate voltage Reverse peak gate voltage VGFM VGRM 10 Volts TJ -40 to +125 °C Tstg -40 to +150 °C 30 In. lb. Average gate power (Pulse width ≤ 2µs) Operating junction temperature range Storage temperature range Mounting torque Note 1: VDRM and VRRM for all types can be applied on a continuous basis without incurring damage. Ratings apply for zero or negative gate voltage. Devices shall not have a positive bias applied to the gate concurrently with a negative potential on the anode. THERMAL CHARACTERISTICS Characteristic Thermal resistance, junction to case Pressfit 144 Market Street Kenilworth NJ 07033 USA Symbol RӨJC phone +1.908.245-7200 fax +1.908.245-0555 Maximum 1 Unit °C/W [email protected] www.digitroncorp.com Rev. 20130128 DIGITRON SEMICONDUCTORS MCR64 SERIES SILICON CONTROLLED RECTIFIER ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Peak forward or reverse blocking current (VAK = Rated VDRM or VRRM, gate open) TC = 25°C TC = 125°C IDRM, IRRM Forward “on” voltage (ITM = 175A peak) VTM Gate trigger current (continuous dc) (VD = 12V, RL = 50Ω) TC = 25°C TC = -40°C IGT Gate trigger voltage (continuous dc) (VD = 12V, RL = 50Ω) TC = 25°C TC = -40°C (VD = Rated VDRM, RL = 1000Ω, TJ = 125°C) VGT Holding current (VD = 12V, RL = 50Ω, gate open) IH Forward voltage application rate (VD = rated VDRM, TJ = 125°C) dv/dt Min. Max. Unit - 10 2 µA mA - 2 - 40 75 0.2 3 3.5 - - 60 50 - Volts mA Volts mA V/µs MECHANICAL CHARACTERISTICS Case TO-48 Marking Body painted, alpha-numeric Polarity Cathode is stud TO-48 A B C F H J K L Q T 144 Market Street Kenilworth NJ 07033 USA Inches Min Max 0.604 0.614 0.551 0.559 1.050 1.190 0.135 0.160 0.265 0.420 0.455 0.620 0.670 0.300 0.350 0.055 0.085 0.501 0.505 phone +1.908.245-7200 fax +1.908.245-0555 Millimeters Min Max 15.340 15.600 14.000 14.200 2.670 30.230 3.430 4.060 6.730 10.670 11.560 15.750 17.020 7.620 8.890 1.400 2.160 12.730 12.830 [email protected] www.digitroncorp.com Rev. 20130128 DIGITRON SEMICONDUCTORS MCR64 SERIES 144 Market Street Kenilworth NJ 07033 USA SILICON CONTROLLED RECTIFIER phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130128