ON NLX2G08FMUTCG Dual 2-input and gate Datasheet

NLX2G08
Dual 2-Input AND Gate
The NLX2G08 is an advanced high-speed dual 2-input CMOS
AND gate in ultra-small footprint.
The NLX2G08 input structures provide protection when voltages up
to 7.0 volts are applied, regardless of the supply voltage.
Features
•
•
•
•
•
•
•
www.onsemi.com
High Speed: tPD 2.5 ns (typical) at VCC = 5.0 V
Designed for 1.65 V to 5.5 V VCC Operation
Low Power Dissipation: ICC = 1 mA (Max) at TA = 25°C
24 mA Balanced Output Sink and Source Capability
Balanced Propagation Delays
Overvoltage Tolerant (OVT) Input Pins
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
A1
7
B1
6
A1
Y2
5
1
B1
VCC
8
2
7
MARKING
DIAGRAMS
1
8
Y2
1
Y1
2
B2
3
A2
3
GND
6
4
5
AD MG
G
UDFN8
1.45 x 1.0
CASE 517BZ
1
UDFN8
1.6 x 1.0
CASE 517BY
1
XM
VCC
Y1
GND
4
8
1
UQFN8
MU SUFFIX
CASE 523AN
UDFN8
1.95 x 1.0
CASE 517CA
B2
A2
XX
M
G
XM
XM
1
= Specific Device Code
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
Figure 1. Pinouts
IEEE/IEC
A1
B1
&
ORDERING INFORMATION
Y1
A2
B2
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Y2
PIN ASSIGNMENT
Figure 2. Logic Symbol
Pin
Function
(UQFN8)
Function
(ULLGA/
UDFN)
1
Y1
A1
FUNCTION TABLE
Y = AB
Inputs
Output
2
B2
B1
A
B
Y
3
A2
Y2
L
L
L
4
GND
GND
L
H
L
5
Y2
A2
H
L
L
6
B1
B2
H
H
H
7
A1
Y1
8
VCC
VCC
H = HIGH Logic Level
L = LOW Logic Level
© Semiconductor Components Industries, LLC, 2016
June, 2016 − Rev. 7
1
Publication Order Number:
NLX2G08/D
NLX2G08
MAXIMUM RATINGS
Symbol
Value
Unit
VCC
DC Supply Voltage
*0.5 to +7.0
V
VIN
DC Input Voltage
*0.5 to +7.0
V
*0.5 to VCC + 0.5
V
VIN < GND
*50
mA
VOUT < GND
*50
mA
VOUT
Parameter
DC Output Voltage
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IO
DC Output Source/Sink Current
$50
mA
ICC
DC Supply Current per Supply Pin
$100
mA
IGND
DC Ground Current per Ground Pin
$100
mA
TSTG
Storage Temperature Range
*65 to )150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
TBD
°C
TJ
Junction Temperature Under Bias
TBD
°C
qJA
Thermal Resistance (Note 1)
TBD
°C/W
PD
Power Dissipation in Still Air at 85°C
TBD
mW
MSL
Moisture Sensitivity
FR
Flammability Rating
VESD
ILatchup
Level 1
Oxygen Index: 28 to 34
ESD Withstand Voltage
UL 94 V−0 @ 0.125 in
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
Latchup Performance Above VCC and Below GND at 125°C
(Note 5)
TBD
TBD
N/A
V
$500
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
Power DC Supply Voltage
VIN
Digital Input Voltage (Note 6)
Output Voltage
VOUT
TA
Operating Free−Air Temperature
Dt/DV
Input Transition Rise or Fall Rate
Operating
Data Retention Only
VCC = 1.8 V $0.15 V
VCC = 2.5 V $0.2 V
VCC = 3.3 V $0.3 V
VCC = 5.0 V $0.5 V
Min
Max
Unit
1.65
1.5
5.5
5.5
V
0
5.5
V
0
VCC
V
−55
+125
°C
0
0
0
0
20
20
10
5
ns/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
6. Unused inputs may not be left open. All inputs must be tied to a high− or low−logic input voltage level.
www.onsemi.com
2
NLX2G08
DC ELECTRICAL CHARACTERISTICS
Symbol
Parameter
VIH
High−Level Input
Voltage
Condition
VCC
(V)
1.65
2.3 to 5.5
VIL
Low−Level Input
Voltage
Min
Typ
High−Level
Output Voltage
VIN = VIH or VIL,
IOH = −100 mA
VIN = VIH or VIL
IOH = −4 mA
IOH = −8 mA
IOH = −12 mA
IOH = −16 mA
IOH = −24 mA
IOH = −32 mA
VOL
Low−Level
Output Voltage
VIN = VIH or VIL,
IOL = 100 mA
Min
Max
0.75 x
VCC
0.7 x
VCC
0.25 x
VCC
0.3 x
VCC
2.3 to 5.5
VOH
Max
0.75 x
VCC
0.7 x
VCC
1.65
TA = −555C to
+1255C
TA 3 855C
TA = 255C
Min
Max
0.75 x
VCC
0.7 x
VCC
0.25 x
VCC
0.3 x
VCC
VCC −
0.1
VCC
VCC −
0.1
VCC −
0.1
1.65
2.3
2.7
3.0
3.0
4.5
1.29
1.9
2.2
2.4
2.3
3.8
1.5
2.1
2.4
2.7
2.5
4.0
1.29
1.9
2.2
2.4
2.3
3.8
1.29
1.9
2.2
2.4
2.3
3.8
1.65 to 5.5
V
0.25 x
VCC
0.3 x
VCC
1.65 to 5.5
Unit
V
V
0.1
0.1
0.1
0.24
0.3
0.4
0.4
0.55
0.55
0.24
0.3
0.4
0.4
0.55
0.55
0.24
0.3
0.4
0.4
0.55
0.55
V
VIN = VIH or VIL
IOL = 4 mA
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IOL = 24 mA
IOL = 32 mA
1.65
2.3
2.7
3.0
3.0
4.5
Input Leakage
Current
0 ≤ VIN ≤ 5.5 V
0 to 5.5
$0.1
$1.0
$1.0
mA
IOFF
Power−Off Input
Leakage Current
VIN = 5.5 V
0
1.0
10
10
mA
ICC
Quiescent Supply
Current
0 ≤ VIN ≤ 5.5 V
5.5
1.0
10
10
mA
IIN
0.08
0.20
0.22
0.28
0.38
0.42
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
AC ELECTRICAL CHARACTERISTICS tR = tF = 2.5 ns
VCC
Symbol
tPLH
tPHL
Parameter
Propagation Delay
Input A to Output
TA 3 855C
TA = 255C
TA = −555C
to +1255C
(V)
Test Condition
Min
Typ
Max
Min
Max
Min
Max
Unit
1.65 to 1.95
RL = 1 MW, CL = 15 pF
2.0
5.7
10.5
2.0
11.0
2.0
11.2
ns
2.3 to 2.7
RL = 1 MW, CL = 15 pF
1.2
3.5
5.8
1.2
6.2
1.2
6.3
3.0 to 3.6
RL = 1 MW, CL = 15 pF
0.8
2.6
3.9
0.8
4.3
0.8
4.7
RL = 500 W, CL = 50 pF
3.2
4.8
5.2
RL = 1 MW, CL = 15 pF
1.9
3.1
3.3
RL = 500 W, CL = 50 pF
2.5
3.7
4.0
4.5 to 5.5
5.3
0.5
4.0
4.3
CIN
Input Capacitance
5.5
VIN = 0 V or VCC
2.5
pF
CPD
Power Dissipation
Capacitance (Note 7)
3.3
5.5
10 MHz, VIN = 0V or
VCC
9
11
pF
7. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
www.onsemi.com
3
NLX2G08
VCC
VCC
A and B
50%
50%
GND
tPLH
tPHL
RL
Y
CL
50% VCC
A 1−MHz square input wave is recommended for
propagation delay tests.
PROPAGATION DELAYS
tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns
Figure 3. Switching Waveform
Figure 4. Test Circuit
ORDERING INFORMATION
Package
Shipping†
UQFN8
(Pb−Free)
3000 / Tape & Reel
NLX2G08DMUTCG*
UDFN8, 1.95 x 1.0, 0.5P
(Pb−Free)
3000 / Tape & Reel
NLX2G08DMUTWG*
UDFN8, 1.95 x 1.0, 0.5P
(Pb−Free)
3000 / Tape & Reel
NLX2G08EMUTCG
UDFN8, 1.6 x 1.0, 0.4P
(Pb−Free)
3000 / Tape & Reel
NLX2G08FMUTCG
UDFN8, 1.45 x 1.0, 0.35P
(Pb−Free)
3000 / Tape & Reel
Device
NLX2G08MUTCG
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*These device differ only in tape and reel pin 1 orientation.
www.onsemi.com
4
NLX2G08
PACKAGE DIMENSIONS
UDFN8 1.6x1.0, 0.4P
CASE 517BY
ISSUE O
PIN ONE
REFERENCE
0.10 C
2X
2X
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
0.05 C
A1
SIDE VIEW
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
7X
e/2
0.49
e
1
7X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
1.60 BSC
1.00 BSC
0.40 BSC
0.25
0.35
0.30
0.40
L
8X
0.26
4
L1
1.24
8
5
BOTTOM VIEW
8X
b
0.10
M
C A B
0.05
M
C
0.53
1
PKG
OUTLINE
0.40
PITCH
DIMENSIONS: MILLIMETERS
NOTE 3
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
5
NLX2G08
PACKAGE DIMENSIONS
UDFN8 1.45x1.0, 0.35P
CASE 517BZ
ISSUE O
PIN ONE
REFERENCE
0.10 C
2X
2X
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
ÉÉ
ÉÉ
ÉÉ
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
0.05 C
A1
SIDE VIEW
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
7X
0.48
e/2
e
1
7X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
1.45 BSC
1.00 BSC
0.35 BSC
0.25
0.35
0.30
0.40
8X
0.22
L
4
L1
1.18
8
5
BOTTOM VIEW
8X
0.53
b
0.10
M
C A B
0.05
M
C
1
PKG
OUTLINE
NOTE 3
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
6
0.35
PITCH
NLX2G08
PACKAGE DIMENSIONS
UDFN8 1.95x1.0, 0.5P
CASE 517CA
ISSUE O
PIN ONE
REFERENCE
0.10 C
2X
2X
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
E
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
0.05 C
A1
SIDE VIEW
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
7X
e/2
0.49
e
7X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
1.95 BSC
1.00 BSC
0.50 BSC
0.25
0.35
0.30
0.40
L
8X
0.30
4
1
L1
1.24
8
5
BOTTOM VIEW
8X
b
0.10
M
C A B
0.05
M
C
0.54
NOTE 3
0.50
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
7
1
PKG
OUTLINE
NLX2G08
PACKAGE DIMENSIONS
UQFN8
MU SUFFIX
CASE 523AN
ISSUE O
A
B
D
PIN ONE
REFERENCE
2X
0.10 C
2X
ÉÉÉ
ÉÉÉ
ÇÇÇ
ÇÇÇ
ÉÉÉ
MOLD CMPD
EXPOSED Cu
E
A1
A3
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
DETAIL B
DIM
A
A1
A3
b
D
E
e
L
L1
L3
OPTIONAL
CONSTRUCTION
0.10 C
TOP VIEW
L1
(A3)
DETAIL B
L3
A
0.05 C
b
0.05 C
(0.15)
(0.10)
SIDE VIEW
C
A1
SEATING
PLANE
MILLIMETERS
MIN
MAX
0.45
0.60
0.00
0.05
0.13 REF
0.15
0.25
1.60 BSC
1.60 BSC
0.50 BSC
0.35
0.45
−−−
0.15
0.25
0.35
SOLDERING FOOTPRINT*
DETAIL A
OPTIONAL
CONSTRUCTION
1.70
0.50
PITCH
8X
L3
8X
L
1
e
5
3
0.35
1
DETAIL A
1.70
7
8
8X
b
0.10 C A B
BOTTOM VIEW
0.05 C
7X
0.25
NOTE 3
8X
0.53
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NLX2G08/D
Similar pages