MACOM H41M0FZD Axial leaded precision resistor Datasheet

Axial Leaded Precision Resistors
Type HOLCO Series
Key Features
I
Ultra Precision Down To 0.05%
I
Matched Sets Available
To 2ppm/°C
I
High Pulse Withstand
I
Low Reactance
I
Low TCR - Down
To 5ppm/°C
I
Long Term Stability
I
Up To 1 Watt At 70°C
I
Released To CECC 40101
004, 030 And 804
The Holco range of Precision Metal Film Resistors meets the requirement for economically
priced components for industrial and military applications. The manufacturing facility
utilises closely controlled production processes including the sputter coating of metal alloy
films to ceramic substrates, and laser spiralling to achieve close tolerance and high
stability resistors. An epoxy coating is applied for environmental and mechanical
protection. Commercially the Series is available in two case sizes, from 1 ohm to
4M ohms, tolerances from 0.05% to 1% and TCR's from 5ppm/°C to 100ppm/°C. Offered
with release to BS CECC 40101 004, 030 and 804 the H8 is available via distribution.
Characteristics - Electrical
H4P
H4
H8
BS CECC 40101 004
Style:
Power Rating at 70°C:
K
H
J
0.25W
0.063W
0.125W
Temperature Rise (max):
32°C
14°C
28°C
Limiting Element Voltage:
250V
200V
200V
BS CECC 40101 030
Style:
Power Rating at 125°C:
J
H
0.125W
0.1W
Temperature Rise (max):
30°C
30°C
Limiting Element Voltage:
250V
200V
BS CECC 40101 804
Style:
B
A
Power Rating at 125°C:
0.25W
0.125W
Limiting Element Voltage:
250V
200V
0.25W
Commercial Ratings
Power Rating at 70°C:
1.0W
0.5W
Temperature Rise:
70°C
55°C
40°C
Limiting Element Voltage:
500V
350V
350V
General Data
1773230 CIS BI 06/2011
Lead Material:
Solderability to BS CECC 40101 004 Para 4.15.1
Encapsulation:
Conformal Epoxy Coating
Resistor Marking:
Legend printed in accordance with CECC 40000 Para 2.4
Solvent Resistance:
The epoxy coating and print will withstand the action of all commonly
used industrial cleansing solvents
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Temperature Coefficient / Tolerance Ranges
TCR
H4P
ppm/°C
0.05%
H4
0.1%-0.25% 0.5%-1.0%
0.05%
H8
0.1%-0.25% 0.5%-1.0%
0.05%
0.1%-0.25% 0.5%-1.0%
5
10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K 10R-500K
10
10R-1M0
10R-1M0 10R-1M0
10R-1M0
10R-1M0 10R-1M0
10R-1M0 10R-1M0 10R-1M0
15
10R-1M0
10R-1M0 10R-1M0
10R-1M0
10R-1M0 10R-1M0
10R-1M0 10R-1M0 10R-1M0
25
10R-1M0
10R-2M0 10R-2M0
10R-1M0
10R-2M0 10R-2M0
10R-1M0 10R-2M0 10R-2M0
50
10R-1M0
10R-2M0 10R-4M0
10R-1M0
10R-2M0 10R-4M0
10R-1M0 10R-2M0 10R-4M0
100
10R-1M0
1R0-2M0 1R0-4M0
10R-1M0
1R0-2M0 1R0-4M0
10R-1M0 1R0-2M0 1R0-4M0
Approved Value Ranges
40101-004, 40101-030
Type
Style
004
Style
030
Z
100ppm
C
50ppm
D
25ppm
Y
15ppm
H4
K
J
10R-1M0
49R9-1M0
49R9-1M0
49R9-1M0
H8
HJ
H
10R-1M0
49R9-1M0
49R9-1M0
49R9-1M0
Tolerances 0.1%, 0.25%, 0.5%, 1%
40101-804
Type
Style
C
50ppm
D
25ppm
T
15ppm
H4
B
49R9-1M0
49R9-1M0
49R9-1M0
H8
A
49R9-1M0
49R9-1M0
49R9-1M0
Tolerances 0.1%, 0.25%, 0.5%, 1%
Characteristics - Electrical
1773230 CIS BI 06/2011
Typical Data
Reference
Voltage Coefficient of
Resistance (Between 10%
and Full Rated Voltage)
Less Than
5ppm/Volt Applied
n/a
Insulation Resistance at
500 Volts
Greater Than 1012 Ohms
n/a
Resistance to Soldering
Heat (260°C for 10 Secs.)
Less Than 0.05%
BS CECC 40101 004
Para 4.15.2
Short Term Overload
(6.25 Times Rated BS CECC
Wattage for 5 Seconds)
Less Than 0.06%
BS CECC 40101 004
Para 4.11
Ambient Temperature
Range
-55°C to +155°C
BS CECC 40101 004,
BS CECC 40101 030 & Commercial
Rapid Change of
Temperature
(-55°C to +155°C, 5 cycles)
Less Than 0.04%
BS CECC 40101 004
Para 4.16
Shelf Life
(at Normal Room Temp.)
Less Than 0.05% Per Annum
n/a
Vibration
(10-500 HZ,Amplitude
0.75mm, or Acceleration
98m/s2 which is less severe,
sweep duration 6 hours)
Less Than 0.04%
BS CECC 40101 004
Para 4.19
Vibration
(55-2000 Hz Simple
Harmonic Motion,
Max.Acceleration 98m/s2,
Duration 35±5 Minutes)
Less Than 0.04%
MIL STD 202
METHOD 204-C
Bump (390m/s2,
4000 Bumps)
Less Than 0.03%
BS 2011 Part 2.1 Eb 1977 (1984)
Load Stability
See Graphs
n/a
Damp Heat Steady State
See Graph
BS CECC 40101 004
Para 4.21
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Dimensions
To prevent damage to the components conformal coating, the leads should be adequately supported during the
forming process
H4P
H4
H8
Body Length (L) maximum:
10.0 mm
10.0 mm
7.20 mm
Body Diameter (D) maximum:
3.70 mm
3.70 mm
2.50 mm
Lead Diameter (d) maximum:
0.60 mm
0.60 mm
0.60 mm
Lead Length (l) nominal:
30.0 mm
30.0 mm
30.0 mm
Recommended Mounting Pitch:
12.7 mm
12.7 mm
10.2 mm
40
40
24
Weight (g/100 resistors)
Characteristics Long Term Stability
1773230 CIS BI 06/2011
Long Term Stability
BS CECC 40101 004
Ratings at 70°C
H4 - 0.25 W
H8 - 0.125 W
Long Term Stability
BS CECC 40101 030
Ratings at 125°C
H4 - 0.125 W
H8 - 0.1 W
Long Term Stability
Commercial
Ratings at 125°C
H4P - 1W
H4 - 0.5 W
H8 - 0.25 W
Damp Heat Steady State
93% RH at 40°C
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help
Axial Leaded Precision Resistors
Type HOLCO Series
Derating Graph Approved and Commercial Ratings
How to Order
H8
100R
B
Y
B
Common Part
Resistance Value
Tolerance
T.C.R. Code
Release
H4P
1.0 ohm
(1000 milli ohms) 1R0
A - 0.05%
H4
10 ohm
(10 ohms) 10R
H8
100 ohm
(100 ohms) 100R
A - 5ppm
B - 10ppm
B - 0.1%
Y - 15ppm
C - 0.25%
1K 0hm
(1000 ohms) 1K0
10K ohm
(10000 ohms) 10K
100K ohm
(100000 ohms) 100K
1M ohm
(1000000 ohms) 1M0
D - 25ppm
D - 0.5%
C - 50ppm
F - 1.0%
Z - 100ppm
A - Part can only
be sold with
Commercial or
C of C release.
B - Part can be
sold to BS CECC
40101 004,
BS CECC 40101
030
D - Part can
be sold to
BS CECC 40101
804
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Similar pages