Diodes AZ1117ID-5.0TRG1 Low dropout linear regulator with industrial temperature range Datasheet

AZ1117I
LOW DROPOUT LINEAR REGULATOR WITH INDUSTRIAL TEMPERATURE RANGE
Description
Pin Assignments
(Top View)
NEW PRODUCT
The AZ1117I is available in industrial temperature range low dropout
three-terminal regulator.
The AZ1117I is optimized for low voltage where transient response
and minimum input voltage are critical. It provides current limit and
thermal shutdown. Its circuit includes a trimmed bandgap reference to
assure output voltage accuracy to be within ±1%. On-chip thermal
shutdown provides protection against a combination of high current
and ambient temperature that would create excessive junction
temperature.
VOUT
3
INPUT
2
OUTPUT
1
ADJ/GND
SOT223
(Top View)
The AZ1117I is available in 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V fixed
output voltage versions and ADJ output voltage version. The fixed
versions integrate the adjust resistors. It is also available in an
adjustable version which can set the output voltage with two external
resistors.
3
2
1
The AZ1117I is available in the industry-standard SOT223 and
TO252-2 power packages.
INPUT
OUTPUT
ADJ/GND
TO252-2
Features
Applications

Current Limit: 1.35A (Typ)

Output Noise from 10Hz to 10KHz: 0.003% of VOUT

USB Device

PSRR at IOUT = 300mA and f = 120Hz: 70dB

Add-on Card

Output Voltage Accuracy: ±1% (Except 1.2V Version)

DVD Player

On-chip Thermal Shutdown

PC Motherboard

Maximum Quiescent Current: IQMAX = 6mA

Compatible with Low ESR Ceramic Capacitor

Operation Junction Temperature: -40°C to +125°C


Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green‖ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AZ1117I
Document number: DS38213 Rev. 1 - 2
1 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Typical Applications Circuit (Note 4)
VIN=11V
9V
AZ1117I-ADJ
3
10F
+
INPUT
OUTPUT
2
+
22F
ADJ
NEW PRODUCT
1
R1
124
R2
VOUT=VREF * ( 1+R2/R1) + IADJ * R2
768
VIN=5.3V
AZ1117I-3.3
3
10F
+
INPUT
OUTPUT
3.3V
2
+
22F
GND
1
Note 4:
The AZ1117I is compatible with low ESR ceramic capacitor.
The ESR of the output capacitors must be less than 20Ω.
A minimum of 10µF output capacitor is required.
Functional Block Diagram
3
Thermal
Protection
INPUT
+
2
OUTPUT
For Adjustable Output, disconnect A1 and A2, connect B
For Fixed Output, connect A1 and A2, disconnect B
A1
A2
1
ADJ/GND
B
AZ1117I
Document number: DS38213 Rev. 1 - 2
2 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Absolute Maximum Ratings (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
NEW PRODUCT
Rating
Input Voltage
TJ
Operating Junction Temperature Range
TSTG
Storage Temperature Range
Unit
18
V
+150
°C
-65 to +150
°C
θJA
Thermal Resistance (Without Heatsink)
SOT223
TO252-2
125
100
°C/W
θJA
Thermal Resistance (With Heatsink) (Note 6)
SOT223
TO252-2
100
70
°C/W
TLEAD
Notes:
Parameter
VIN
Lead Temperature (Soldering, 10sec)
+260
°C
5. Stresses greater than those listed under ―Absolute Maximum Ratings‖ may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under ―Recommended Operating Conditions‖ is not implied.
Exposure to ―Absolute Maximum Ratings‖ for extended periods may affect device reliability.
2
6. Chip is soldered to 100mm (10mm*10mm) copper (top side solder mask) on 2oz.2 layers FR-4 PCB with 8*0.5mm vias.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VIN
Input Voltage
TJ
Operating Junction Temperature Range
Min
Max
Unit
–
15
V
-40
+125
°C
Electrical Characteristics AZ1117I-ADJ
(Operating Conditions: VIN = VOUT+2V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Reference Voltage
1.5V ≤ VIN-VOUT ≤ 10V
VRLINE
Line Regulation
1.5V ≤ VIN-VOUT ≤ 10V
VRLOAD
Load Regulation
VIN = VOUT+2V
Dropout Voltage
∆VREF = 1%,
IOUT = 0.8A
VREF
VDROP
1.238
1.225
1.250
1.262
1.275
V
—
1.250
0.001
—
—
0.1
0.2
%
—
0.4
1.0
%
SOT223
—
1.2
1.3
V
TO252-2
—
1.3
1.4
V
1mA ≤ IOUT ≤ 1A
Current Limit
—
1
1.35
—
A
—
Adjust Pin Current
—
—
60
120
µA
—
Adjust Pin Current Change
1.5 ≤ (VIN-VOUT) ≤ 10V
—
0.2
5
µA
—
Minimum Load Current
1.5 ≤ (VIN-VOUT) ≤ 10V
—
1.7
5
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
Temperature Stability
—
—
0.5
—
%
—
RMS Output Noise (% of VOUT)
TA = +25°C, 10Hz ≤ f ≤ 10KHz
—
0.003
—
%
—
Thermal Shutdown
Junction Temperature
—
+160
—
°C
—
Thermal Shutdown Hysteresis
—
—
+16
—
°C
ILIMIT
PSRR
θJC
Thermal Resistance
(Junction to Case)
AZ1117I
Document number: DS38213 Rev. 1 - 2
—
SOT223
TO252-2
3 of 15
www.diodes.com
—
—
—
15
10
—
—
°C/W
December 2015
© Diodes Incorporated
AZ1117I
Electrical Characteristics AZ1117I-1.2 (Cont.)
(Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
1.176
1.2
1.224
Output Voltage
V
VOUT
1.5V ≤ VIN-VOUT ≤ 10V
1.152
1.248
1.2
—
0.5
6
Line Regulation
mV
VRLINE
1.5V ≤ VIN-VOUT ≤ 10V
10
—
—
—
2
15
mV
—
—
1.2
1.3
1.3
1.4
V
V
—
1
1.35
—
A
IOUT = 0
—
4
6
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
—
Temperature Stability
—
—
0.5
—
%
RMS Output Noise (% of VOUT)
TA = +25°C, 10Hz ≤ f ≤ 10KHz
—
0.003
—
%
—
—
Thermal Shutdown
Thermal Shutdown Hysteresis
Junction Temperature
—
+160
+16
Thermal Resistance
(Junction to Case)
SOT223
—
—
—
—
—
°C
°C
θJC
—
—
—
—
—
NEW PRODUCT
VRLOAD
VDROP
ILIMIT
IQ
PSRR
Load Regulation
VIN = VOUT+2V
Dropout Voltage
∆VOUT = 1%,
IOUT = 0.8A
Current Limit
Quiescent Current
1mA ≤ IOUT ≤ 1A
SOT223
TO252-2
TO252-2
15
10
°C/W
Electrical Characteristics AZ1117I-1.5 (Cont.)
(Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
1.485
1.5
1.515
Output Voltage
V
VOUT
1.5V ≤ VIN-VOUT ≤ 10V
1.47
1.53
1.5
—
0.5
6
Line Regulation
mV
VRLINE
1.5V ≤ VIN-VOUT ≤ 10V
10
—
—
—
2
15
mV
—
—
1.2
1.3
1.3
1.4
V
V
—
1
1.35
—
A
Quiescent Current
IOUT = 0
—
4
6
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
—
Temperature Stability
—
—
0.5
—
%
RMS Output Noise (% of VOUT)
TA = +25°C, 10Hz ≤ f ≤ 10KHz
—
0.003
—
%
—
—
Thermal Shutdown
Thermal Shutdown Hysteresis
Junction Temperature
—
+160
+16
Thermal Resistance
(Junction to Case)
SOT223
—
—
—
—
—
°C
°C
θJC
—
—
—
—
—
VRLOAD
VDROP
ILIMIT
IQ
PSRR
Load Regulation
VIN = VOUT+2V
Dropout Voltage
∆VOUT = 1%,
IOUT = 0.8A
Current Limit
AZ1117I
Document number: DS38213 Rev. 1 - 2
1mA ≤ IOUT ≤ 1A
SOT223
TO252-2
TO252-2
4 of 15
www.diodes.com
15
10
°C/W
December 2015
© Diodes Incorporated
AZ1117I
Electrical Characteristics AZ1117I-1.8 (Cont.)
(Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
1.782
1.8
1.818
Output Voltage
V
VOUT
1.5V ≤ VIN-VOUT ≤ 10V
1.764
1.836
1.8
—
0.5
6
Line Regulation
mV
VRLINE
1.5V ≤ VIN-VOUT ≤ 10V
10
—
—
—
2
15
mV
—
—
1.2
1.3
1.3
1.4
V
V
—
1
1.35
—
A
IOUT = 0
—
4
6
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
—
Temperature Stability
—
—
0.5
—
%
RMS Output Noise (% of VOUT)
TA = +25°C, 10Hz ≤ f ≤ 10KHz
—
0.003
—
%
—
—
Thermal Shutdown
Thermal Shutdown Hysteresis
Junction Temperature
—
+160
+16
Thermal Resistance
(Junction to Case)
SOT223
—
—
—
—
—
°C
°C
θJC
—
—
—
—
—
NEW PRODUCT
VRLOAD
VDROP
ILIMIT
IQ
PSRR
Load Regulation
VIN = VOUT+2V
Dropout Voltage
∆VOUT = 1%,
IOUT = 0.8A
Current Limit
Quiescent Current
1mA ≤ IOUT ≤ 1A
SOT223
TO252-2
TO252-2
15
10
°C/W
Electrical Characteristics AZ1117I-2.5 (Cont.)
(Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
2.475
2.5
2.525
Output Voltage
V
VOUT
1.5V ≤ VIN-VOUT ≤ 10V
2.455
2.5
2.545
—
0.5
6
Line Regulation
mV
VRLINE
1.5V ≤ VIN-VOUT ≤ 10V
10
—
—
—
Load Regulation
2
15
mV
VRLOAD
VIN = VOUT+2V 1mA ≤ IOUT ≤ 1A
—
—
1.2
1.3
1.3
1.4
—
1
1.35
—
A
IOUT = 0
—
4
6
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
—
Temperature Stability
—
—
0.5
—
%
RMS Output Noise (% of VOUT)
TA = +25°C, 10Hz ≤ f ≤ 10KHz
—
0.003
—
%
—
—
Thermal Shutdown
Thermal Shutdown Hysteresis
Junction Temperature
—
+160
+16
Thermal Resistance
(Junction to Case)
SOT223
—
—
—
—
—
°C
°C
θJC
—
—
—
—
—
VDROP
ILIMIT
IQ
PSRR
Dropout Voltage
∆VOUT = 1%,
IOUT = 0.8A
Current Limit
Quiescent Current
AZ1117I
Document number: DS38213 Rev. 1 - 2
SOT223
TO252-2
TO252-2
5 of 15
www.diodes.com
15
10
V
V
°C/W
December 2015
© Diodes Incorporated
AZ1117I
Electrical Characteristics AZ1117I-3.3 (Cont.)
NEW PRODUCT
(Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
3.267
3.3
3.333
Output Voltage
V
VOUT
1.5V ≤ VIN-VOUT ≤ 10V
3.235
3.365
3.3
—
0.5
6
Line Regulation
mV
VRLINE
1.5V ≤ VIN-VOUT ≤ 10V
10
—
—
—
Load Regulation
2
15
mV
VRLOAD
VIN = VOUT+2V 1mA ≤ IOUT ≤ 1A
—
—
1.2
1.3
1.3
1.4
—
1
1.35
—
A
IOUT = 0
—
4
6
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
—
Temperature Stability
—
0.003
—
—
%
TA = +25ºC, 10Hz ≤ f ≤ 10KHz
—
—
0.5
RMS Output Noise (% of VOUT)
—
—
Thermal Shutdown
Thermal Shutdown Hysteresis
Junction Temperature
—
°C
°C
θJC
Thermal Resistance
(Junction to Case)
SOT223
—
—
—
—
—
VDROP
ILIMIT
IQ
PSRR
Dropout Voltage
∆VOUT = 1%,
IOUT = 0.8A
Current Limit
Quiescent Current
SOT223
TO252-2
TO252-2
—
—
—
—
—
+160
+16
15
10
V
V
%
°C/W
Electrical Characteristics AZ1117I-5.0 (Cont.)
(Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in
Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
4.950
5.0
5.050
Output Voltage
V
VOUT
1.5V ≤ VIN-VOUT ≤ 10V
4.900
5.100
5.0
—
0.5
6
Line Regulation
mV
VRLINE
1.5V ≤ VIN-VOUT ≤ 10V
10
—
—
—
2
15
mV
—
—
1.2
1.3
1.3
1.4
V
V
—
1
1.35
—
A
IOUT = 0
—
4
6
mA
Ripple Rejection
f = 120Hz, COUT = 22µF
(VIN-VOUT) = 3V, IOUT = 300mA
—
70
—
dB
—
—
Temperature Stability
—
—
0.5
—
%
RMS Output Noise (% of VOUT)
TA = +25°C, 10Hz ≤ f ≤ 10KHz
—
0.003
—
%
—
—
Thermal Shutdown
Thermal Shutdown Hysteresis
Junction Temperature
—
—
—
+160
+16
—
—
°C
°C
θJC
Thermal Resistance
(Junction to Case)
SOT223
TO252-2
—
15
10
—
VRLOAD
VDROP
ILIMIT
IQ
PSRR
Load Regulation
VIN = VOUT+2V
Dropout Voltage
∆VOUT = 1%,
IOUT = 0.8A
Current Limit
Quiescent Current
AZ1117I
Document number: DS38213 Rev. 1 - 2
1mA ≤ IOUT ≤ 1A
SOT223
TO252-2
6 of 15
www.diodes.com
—
—
°C/W
December 2015
© Diodes Incorporated
AZ1117I
Performance Characteristics
Line Regulation vs. Temperature
Load Regulation vs. Temperature
10
IOUT=10mA
0.0
-0.2
AZ1117I-2.5V
VIN=4.5V
5
Load Regulation (mV)
Line Regulation (mV)
AZ1117I-2.5V
VIN=4.5V to 10V
0.2
IOUT=10mA to 800mA
0
-5
-10
-15
-20
-0.4
-25
-40
-20
0
20
40
60
80
100
-40
120
-20
0
o
20
40
60
80
120
Junction Temperature ( C)
Reference Voltage vs. Temperature
Output Voltage vs. Temperature
2.60
1.270
1.265
2.58
AZ1117I-ADJ
VIN=4.5V
1.260
AZ1117I-2.5V
VIN=4.5V
2.56
IOUT=10mA
IOUT=10mA
2.54
1.255
Output Voltage (V)
Reference Voltage (V)
100
o
Junction Temperature ( C)
1.250
1.245
1.240
1.235
2.52
2.50
2.48
2.46
1.230
2.44
1.225
2.42
2.40
1.220
-40
-20
0
20
40
60
80
100
120
-40
-20
0
o
20
40
60
80
100
120
o
Junction Temperature ( C)
Junction Temperature ( C)
Minimum Load Current vs. Temperature
Adjust Pin Current vs. Temperature
100
3
AZ1117I-ADJ
VIN=4.5V
AZ1117I-ADJ
VIN=4.5V
90
80
Adjust Pin Current (A)
2
Minimum Load Current (mA)
NEW PRODUCT
0.4
1
0
70
60
50
40
30
20
-1
10
0
-2
-40
-20
0
20
40
60
80
100
-40
120
AZ1117I
Document number: DS38213 Rev. 1 - 2
-20
0
20
40
60
80
100
120
o
Junction Temperature ( C)
o
Junction Temperature ( C)
7 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Performance Characteristics (Cont.)
Dropout Voltage vs. Output Current
Power Dissipation vs. Temperature
10
1.8
1.7
1.4
8
Power Dissipation (W)
Dropout Voltage (V)
NEW PRODUCT
1.5
AZ1117I-2.5V
Package: SOT223
No Heat Sink
9
O
-40 C
O
0 C
O
+25 C
O
+85 C
O
+100 C
1.6
1.3
1.2
1.1
1.0
7
6
5
4
3
2
0.9
1
0.8
0.0
0.2
0.4
0.6
0.8
1.0
0
-40
Output Current (A)
-20
0
20
40
60
80
100
120
o
Case Temperature ( C)
Line Transient Response
Load Transient Response
∆VOUT (50mV/Div)
∆VOUT (0.1V/Div)
D
0.2
0.1
0
-0.1
IOUT (0.5A/Div)
VIN (0.5V/Div)
5.3
4.8
4.3
3.8

Time (20µ
s/Div)
Time (10µs/Div)
PSRR vs. Frequency
Current Limit vs. Temperature
2.0
80
1.8
70
1.6
1.4
Current Limit (A)
PSRR (dB)
60
50
40
30
1.2
1.0
0.8
AZ1117I-2.5V
VIN=4.5V
0.6
0.4
No Heat Sink
@VOUT=VOUT(nom)x98%
20
0.2
Continuous Airflow 10scfm
10
0.0
10
100
1k
10k
100k
AZ1117I
Document number: DS38213 Rev. 1 - 2
-40
-20
0
20
40
60
80
100
120
o
Frequency (Hz)
Temperature ( C)
8 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Performance Characteristics (Cont.)
Dropout Voltage vs. Temperature
2.0
1.9
IOUT=0.1A
Dropout Voltage (V)
NEW PRODUCT
1.8
IOUT=0.5A
1.7
IOUT=0.8A
1.6
IOUT=1A
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
-40
-20
0
20
40
60
80
100
120
O
Junction Temperature ( C)
AZ1117I
Document number: DS38213 Rev. 1 - 2
9 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Ordering Information
AZ1117I X - XX XX XX
NEW PRODUCT
Product Name
Package
Output Voltage
Packing
RoHS/Green
H : SOT223
D : TO252-2
ADJ : Adjustable Output
1.2 : Fixed Output 1.2V
1.5 : Fixed Output 1.5V
1.8 : Fixed Output 1.8V
2.5 : Fixed Output 2.5V
3.3 : Fixed Output 3.3V
5.0 : Fixed Output 5.0V
TR : Tape & Reel
G1 : Green
Package
Temperature
Range
SOT223
-40°C to +125C
TO252-2
Part Number
Marking ID
AZ1117IH-ADJTRG1
AZ1117IH-1.2TRG1
AZ1117IH-1.5TRG1
AZ1117IH-1.8TRG1
AZ1117IH-2.5TRG1
AZ1117IH-3.3TRG1
AZ1117IH-5.0TRG1
AZ1117ID-ADJTRG1
AZ1117ID-1.2TRG1
AZ1117ID-1.5TRG1
AZ1117ID-1.8TRG1
AZ1117ID-2.5TRG1
AZ1117ID-3.3TRG1
AZ1117ID-5.0TRG1
GH86J
GH86K
GH86L
GH86M
GH86N
GH86P
GH86Q
AZ1117ID-ADJG1
AZ1117ID-1.2G1
AZ1117ID-1.5G1
AZ1117ID-1.8G1
AZ1117ID-2.5G1
AZ1117ID-3.3G1
AZ1117ID-5.0G1
Packing
4000/Tape & Reel
4000/Tape & Reel
4000/Tape & Reel
4000/Tape & Reel
4000/Tape & Reel
4000/Tape & Reel
4000/Tape & Reel
2500/Tape & Reel
2500/Tape & Reel
2500/Tape & Reel
2500/Tape & Reel
2500/Tape & Reel
2500/Tape & Reel
2500/Tape & Reel
Marking Information
(1)
SOT223
(Top View)
XXXXX
YWWAXX
(2)
First Line: Logo and Marking ID
(See Ordering Information)
Second Line: Date Code
Y: Year
WW: Work Week of Molding
A: Assembly House Code
th
th
XX: 7 and 8 Digits of Batch Number
TO252-2
(Top View)
AZ1117ID
-X.XG1
YWWAXX
AZ1117I
Document number: DS38213 Rev. 1 - 2
First and Second Lines: Logo and Marking ID
(See Ordering Information)
Third Line: Date Code
Y: Year
WW: Work Week of Molding
A: Assembly House Code
th
th
XX: 7 and 8 Digits of Batch Number
10 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Package Outline Dimensions (All dimensions in mm.)
(1)
Package Type: SOT223
6.300(0.248)
6.700(0.264)
0.200(0.008)
4)
0.350(0.01
2.900(0.114)
NEW PRODUCT
3.100(0.122)
0.850(0.033)
3.700(0.146)
3.300(0.130)
6.700(0.264)
7.300(0.287)
MIN
0.250(0.010)
1.750(0.069)
TYP
2.300(0.091)
0.600(0.024)
TYP
0.810(0.032)
4.500(0.177)
0°
10°
4.700(0.185)
0.010(0.0004)
0.150(0.006)
1.500(0.059)
1.520(0.060)
1.700(0.067)
1.800(0.071)
AZ1117I
Document number: DS38213 Rev. 1 - 2
11 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Package Outline Dimensions (All dimensions in mm.) (Cont.)
(2)
Package Type: TO252-2 (5)
0.880(0.035)
1.270(0.050)
6.450(0.254)
6.700(0.264)
2.190(0.086)
2.390(0.094)
5.210(0.205)
5.500(0.217)
0.450(0.018)
0.580(0.023)
9.400(0.370)
10.400(0.409)
6.000(0.236)
6.200(0.244)
NEW PRODUCT
6°
8°
0.000(0.000)
0.130(0.005)
0.640(0.025)
1.020(0.040)
4.320(0.170)
MIN
AZ1117I
Document number: DS38213 Rev. 1 - 2
0.508(0.020)
0°
10°
5.210(0.205)
MIN
0.640(0.025)
0.880(0.035)
1.400(0.055)
1.780(0.070)
2.286(0.090)
2.740(0.108)REF
0.760(0.030)
1.140(0.045)
12 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Suggested Pad Layout
(1)
Package Type: SOT223
Grid placement courtyard
NEW PRODUCT
X2
Y
Z
G
X1
Y
E1
E2
Dimensions
Z
(mm)/(inch)
G
(mm)/(inch)
X1
(mm)/(inch)
X2
(mm)/(inch)
Y
(mm)/(inch)
E1
(mm)/(inch)
E2
(mm)/(inch)
Value
8.400/0.331
4.000/0.157
1.200/0.047
3.500/0.138
2.200/0.087
2.300/0.091
4.600/0.181
AZ1117I
Document number: DS38213 Rev. 1 - 2
13 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
Suggested Pad Layout (Cont.)
(2)
Package Type: TO252-2 (5)
NEW PRODUCT
X2
Y2
Z
G
Y1
X1
E1
Dimensions
Z
(mm)/(inch)
X1
(mm)/(inch)
X2=Y2
(mm)/(inch)
Y1
(mm)/(inch)
G
(mm)/(inch)
E1
(mm)/(inch)
Value
11.600/0.457
1.500/0.059
7.000/0.276
2.500/0.098
2.100/0.083
2.300/0.091
AZ1117I
Document number: DS38213 Rev. 1 - 2
14 of 15
www.diodes.com
December 2015
© Diodes Incorporated
AZ1117I
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
AZ1117I
Document number: DS38213 Rev. 1 - 2
15 of 15
www.diodes.com
December 2015
© Diodes Incorporated
Similar pages