Pr el im in ar y Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com Pr el im in ar y THIS PAGE INTENTIONALLY LEFT BLANK HMC712ALP3C v00.1115 Features The HMC712ALP3CE is ideal for: Wide Bandwidth: 5 - 26.5 GHz • Point-to-Point Radio Excellent Linearity: +28 dBm Input P1dB • VSAT Radio Wide Attenuation Range: 28 dB • Test Instrumentation Absorptive Topology • Microwave Sensors Singe or Dual Control Operation • Military, ECM & Radar 16 Lead 3x3mm SMT Package: 9mm² Functional Diagram General Description y Typical Applications The HMC712ALP3CE is an absorptive Voltage Variable Attenuator (VVA) which operates from 5 - 26.5 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 28 dB amplitude range. It features two shunt-type attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2. Optimum linearity performance of the attenuator is achieved by first varying Vctrl1 of the 1st attenuation stage from -3V to 0V with Vctrl2 fixed at -3V. The control voltage of the 2nd attenuation stage, Vctrl2, should then be varied from -3V to 0V, with Vctrl1 fixed at 0V. The HMC712ALP3CE is housed in a RoHS compliant 3x3 mm QFN leadless package in ar im Pr el ATTENUATOR - ANALOG - SMT GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz However, if the Vctrl1 and Vctrl2 pins are connected together it is possible to achieve the full analog attenuation range with only a small degradation in input IP3 performance. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave point-to-point and VSAT radios. Electrical Specifications, TA = +25° C, 50 Ohm system Parameter Typ. Max. Units 3.5 4.5 5.5 dB dB dB Attenuation Range 28 dB Input Return Loss 12 dB Insertion Loss 1 Min. 5 - 16 GHz 16 - 24 GHz 24 - 26.5 GHz Output Return Loss 10 dB Input Power for 1 dB Compression (any attenuation) 28 dBm Input Third Order Intercept (Two-tone Input Power = 10 dBm Each Tone) 32 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC712ALP3C v00.1115 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz Control Voltages RF Input Power +30 dBm Vctrl1 -3 to 0V @ 10 µA Control Voltage Range +1 to -5V Vctrl2 -3 to 0V @ 10 µA Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) 1W Thermal Resistance (Channel to ground paddle) 66 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Pr el im Outline Drawing in ar y ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS ATTENUATOR - ANALOG - SMT Absolute Maximum Ratings NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2