ON NLX1G97CMUTCG Configurable multifunction gate Datasheet

NLX1G97
Configurable Multifunction
Gate
The NLX1G97 MiniGatet is an advanced high−speed CMOS
multifunction gate. The device allows the user to choose logic
functions MUX, AND, OR, NAND, NOR, INVERT and BUFFER.
The device has Schmitt−trigger inputs, thereby enhancing noise
immunity.
The NLX1G97 input and output structures provide protection when
voltages up to 7.0 V are applied, regardless of the supply voltage.
www.onsemi.com
MARKING
DIAGRAMS
Features
•
•
•
•
•
•
•
High Speed: tPD = 3.3 ns (Typ) @ VCC = 5.0 V
Low Power Dissipation: ICC = 1 mA (Maximum) at TA = 25°C
Power Down Protection Provided on inputs
Balanced Propagation Delays
Overvoltage Tolerant (OVT) Input and Output Pins
Ultra−Small Packages
These are Pb−Free Devices
UDFN6
1.0 x 1.0
CASE 517BX
XM
UDFN6
1.2 x 1.0
CASE 517AA
XM
UDFN6
1.45 x 1.0
CASE 517AQ
XM
1
1
PIN ASSIGNMENTS
1
IN B
1
6
IN C
GND
2
5
VCC
IN A
3
4
OUT Y
F
M
= Specific Device Code
= Date Code
ORDERING INFORMATION
(Top View)
© Semiconductor Components Industries, LLC, 2016
June, 2016 − Rev. 4
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
1
Publication Order Number:
NLX1G97/D
NLX1G97
IN A
OUT Y
IN B
IN C
Figure 1. Function Diagram
PIN ASSIGNMENT
FUNCTION TABLE*
1
IN B
Input
Output
2
GND
A
B
C
Y
3
IN A
L
L
L
L
4
OUT Y
L
L
H
L
5
VCC
L
H
L
H
6
IN C
L
H
H
L
H
L
L
L
H
L
H
H
H
H
L
H
H
H
H
H
*To select a logic function, please refer to “Logic Configurations
section”.
www.onsemi.com
2
NLX1G97
LOGIC CONFIGURATIONS
VCC
B
B
Y
A
A
1
6
2
5
3
4
VCC
C
A
Y
C
Y
A
1
6
2
5
3
4
C
Y
C
Figure 2. 2−Input MUX
Figure 3. 2−Input AND (When B = “L”)
VCC
VCC
A
C
A
1
Y
A
6
2
5
3
4
B
C
Y
B
C
Y
B
Y
6
2
5
3
4
Figure 4. 2−Input OR with Input C Inverted
(When B = “H”)
C
B
Y
1
6
2
5
3
4
VCC
C
C
Y
Y
Figure 6. 2−Input OR (When A =”H”)
1
6
2
5
3
4
C
Y
Figure 7. Inverter (When A = “L” and B =
“H”)
VCC
B
B
Y
Figure 5. 2−Input AND with Input C
Inverted (When A = “L”)
VCC
B
C
Y
C
C
1
Y
1
6
2
5
3
4
Y
Figure 8. Buffer (When A = C = “L”)
www.onsemi.com
3
NLX1G97
MAXIMUM RATINGS
Symbol
Value
Unit
VCC
DC Supply Voltage
−0.5 to +7.0
V
VIN
DC Input Voltage
−0.5 to +7.0
V
DC Output Voltage
−0.5 to +7.0
V
VIN < GND
−50
mA
VOUT < GND
−50
mA
VOUT
Parameter
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IO
DC Output Source/Sink Current
$50
mA
ICC
DC Supply Current Per Supply Pin
$100
mA
IGND
DC Ground Current per Ground Pin
$100
mA
TSTG
Storage Temperature Range
−65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
TJ
Junction Temperature Under Bias
150
°C
MSL
FR
VESD
ILATCHUP
Moisture Sensitivity
Level 1
Flammability Rating Oxygen
Index: 28 to 34
ESD Withstand Voltage
UL 94 V−0 @ 0.125 in
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
Latchup Performance Above VCC and Below GND at 125°C (Note 5)
>2000
>200
N/A
V
$500
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Unit
1.65
5.5
V
VCC
Positive DC Supply Voltage
VIN
Digital Input Voltage
0
5.5
V
Output Voltage
0
5.5
V
−55
+125
°C
0
0
0
No Limit
No LImit
No Limit
nS/V
VOUT
TA
Operating Free−Air Temperature
Dt/DV
Input Transition Rise or Fall Rate
VCC = 2.5 V $ 0.2 V
VCC = 3.3 V $ 0.3 V
VCC = 5.0 V $ 0.5 V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
4
NLX1G97
DC ELECTRICAL CHARACTERISTICS
Symbol
VT+
VT−
VH
VOH
VOL
Parameter
Conditions
Positive
Threshold
Voltage
Negative
Threshold
Voltage
Hysteresis
Voltage
Minimum
High−Level
Output
Voltage
Maximum
Low−Level
Output
Voltage
TA = 255C
VCC
(V)
Min
1.65
0.79
1.16
2.3
1.11
3.0
4.5
5.5
Typ
Max
TA v +855C
TA = −555C to
+1255C
Min
Min
Max
Max
Unit
1.16
1.16
V
1.56
1.56
1.56
1.5
1.87
1.87
1.87
2.16
2.74
2.74
2.74
2.61
3.33
3.33
3.33
1.65
0.35
0.62
0.35
0.35
2.3
0.58
0.87
0.58
0.58
3.0
0.84
1.19
0.84
0.84
4.5
1.41
1.9
1.41
1.41
5.5
1.78
2.29
1.78
1.78
1.65
0.30
0.62
0.30
0.62
0.30
0.62
2.3
0.40
0.8
0.40
0.8
0.40
0.8
3.0
0.53
0.87
0.53
0.87
0.53
0.87
4.5
0.71
1.04
0.71
1.04
0.71
1.04
1.2
0.8
1.2
0.8
1.2
5.5
0.8
1.65 −
5.5
VCC
− 0.1
VCC
− 0.1
VCC
− 0.1
IOH = −4 mA
1.65
1.2
1.2
1.2
IOH = −8 mA
2.3
1.9
1.9
1.9
IOH = −16 mA
3.0
2.4
2.4
2.4
IOH = −24 mA
3.0
2.3
2.3
2.3
IOH = −32 mA
4.5
3.8
3.8
3.8
VIN = VT−MIN or VT+MAX
IOH = −50 mA
V
V
V
VIN = VT−MIN or VT+MAX
VIN = VT−MIN or VT+MAX
IOL = 50 mA
1.65 −
5.5
0.1
0.1
0.1
IOL = 4 mA
1.65
0.45
0.45
0.45
IOL = 8 mA
2.3
0.3
0.3
0.3
IOL = 16 mA
3.0
0.4
0.4
0.4
IOL = 24 mA
3.0
0.55
0.55
0.55
IOL = 32 mA
4.5
0.55
0.55
0.55
V
VIN = VT−MIN or VT+MAX
IIN
Input
Leakage
Current
0 v VIN v 5.5 V
0 to
5.5
$0.1
$1.0
$1.0
mA
ICC
Quiescent
Supply
Current
VIN = VCC or GND
5.5
1.0
10
10
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
5
NLX1G97
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3.0 ns)
TA = 255C
Typ
Max
Min
Max
Min
Max
Unit
1.65 − 1.95
3.2
8.6
14.4
3.2
14.4
3.2
14.4
ns
2.3 − 2.7
2.0
5.1
8.3
2.0
8.3
2.0
8.3
3.0 − 3.6
1.5
3.9
6.3
1.5
6.3
1.5
6.3
4.5 − 5.5
1.1
3.3
5.1
1.1
5.1
1.1
5.1
Parameter
VCC (V)
tPLH,
tPHL
Propagation Delay,
Any Input to Output
Y (See Test Circuit)
Input Capacitance
CPD
Power Dissipation
Capacitance
(Note 6)
TA = −555C
to +1255C
Min
Symbol
CIN
TA v +855C
Test Condition
5.0
f = 10 MHz
3.5
pF
22
pF
6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the dynamic operating current consumption without
load. Average operating current can be obtained by the equation ICC(OPR) = CPD • VCC • fin + ICC. CPD is used to determine the no−load
dynamic power consumption: PD = CPD • VCC2 • fin + ICC • VCC.
TEST CIRCUIT AND VOLTAGE WAVEFORMS
From Output
Under Test
VLOAD
RL
Test
S1
tPLH/tPHL
Open
tPLZ/tPZL
VLOAD
tPHZ/tPZH
GND
Open
GND
CL *
RL
*CL includes probes and jig capacitance.
Figure 9. Load Circuit
Inputs
VCC
VI
tr/tf
VM
VLOAD
CL
RL
VD
1.8 V $ 0.15 V
VCC
v 2 ns
VCC/2
2 x VCC
30 pF
1 kW
0.15 V
2.5 V $ 0.2 V
VCC
v 2 ns
VCC/2
2 x VCC
30 pF
500 W
0.15 V
3.3 V $ 0.3 V
3V
v 2.5 ns
1.5 V
6V
50 pF
500 W
0.3 V
5.5 V $ 0.5 V
VCC
v 2.5 ns
VCC/2
2 x VCC
50 pF
500 W
0.3 V
www.onsemi.com
6
NLX1G97
Timing Input
tW
Input
VI
VM
0V
VI
VM
VM
tsu
0V
Data Input
th
VM
VI
VM
0V
Figure 10. Voltage Waveforms Pulse Duration
Figure 11. Voltage Waveforms Setup and Hold
Times
VI
Input
VM
VM
VM
tPHL
Output
0V
tPHL
tPLH
Output
Output
Control
VM
Output
Waveform 1
S1 at VLOAD
(Note 7)
VOH
VOL
tPLH
VM
VM
VM
VM
0V
VM
tPZH
VOH
Output
Waveform 2
S1 at GND
(Note 8)
VOL
Figure 12. Voltage Waveforms Propagation Delay
Times Inverting and Noninverting Outputs
VI
VM
VLOAD/2
VOL + VD
VOL
tPHZ
VOH
VOH − VD
[0 V
Figure 13. Voltage Waveforms Enable and
Disable Times Low− and High−Level Enabling
7. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
8. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control
9. All input pulses are supplied by generators having the following characteristics: PRR v 10 MHz, ZO = 50 W.
10. The outputs are measured one at a time, with one transition per measurement.
11. All parameters are waveforms are not applicable to all devices.
ORDERING INFORMATION
Package
Shipping†
NLX1G97MUTCG
UDFN6, 1.2 x 1.0, 0.4P
(Pb−Free)
3000 / Tape & Reel
NLX1G97AMUTCG
(In Development)
UDFN6, 1.45 x 1.0, 0.5P
(Pb−Free)
3000 / Tape & Reel
NLX1G97CMUTCG
(In Development)
UDFN6, 1.0 x 1.0, 0.35P
(Pb−Free)
3000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
7
NLX1G97
PACKAGE DIMENSIONS
UDFN6, 1.2x1.0, 0.4P
CASE 517AA−01
ISSUE D
EDGE OF PACKAGE
PIN ONE
REFERENCE
2X
0.10 C
L1
ÉÉ
ÉÉ
E
DETAIL A
Bottom View
(Optional)
TOP VIEW
2X
EXPOSED Cu
0.10 C
(A3)
0.10 C
A1
A
10X
0.08 C
ÉÉÉ
ÉÉÉ
A3
DETAIL B
Side View
(Optional)
5X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.127 REF
0.15
0.25
1.20 BSC
1.00 BSC
0.40 BSC
0.30
0.40
0.00
0.15
0.40
0.50
MOUNTING FOOTPRINT*
6X
C
A1
DIM
A
A1
A3
b
D
E
e
L
L1
L2
MOLD CMPD
SEATING
PLANE
SIDE VIEW
1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.25 AND
0.30 mm FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
A
B
D
6X
0.42
0.22
L
3
L2
6X
b
0.10 C A B
0.05 C
6
4
0.40
PITCH
e
NOTE 3
1.07
DIMENSIONS: MILLIMETERS
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
8
NLX1G97
PACKAGE DIMENSIONS
UDFN6 1.45x1.0, 0.5P
CASE 517AQ
ISSUE O
A
B
D
L
L
L1
PIN ONE
REFERENCE
0.10 C
ÉÉÉ
ÉÉÉ
DETAIL A
E
OPTIONAL
CONSTRUCTIONS
DETAIL B
MOLD CMPD
DETAIL B
0.05 C
6X
DIM
A
A1
A2
b
D
E
e
L
L1
ÉÉ
ÉÉ
EXPOSED Cu
TOP VIEW
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
OPTIONAL
CONSTRUCTIONS
A
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.07 REF
0.20
0.30
1.45 BSC
1.00 BSC
0.50 BSC
0.30
0.40
−−−
0.15
MOUNTING FOOTPRINT
0.05 C
A1
A2
SIDE VIEW
e
6X
C
6X
SEATING
PLANE
L
1.24
3
1
DETAIL A
6X
0.53
6
0.30
PACKAGE
OUTLINE
4
BOTTOM VIEW
6X
0.50
PITCH
DIMENSIONS: MILLIMETERS
b
0.10 C A B
0.05 C
1
NOTE 3
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
9
NLX1G97
PACKAGE DIMENSIONS
UDFN6 1.0x1.0, 0.35P
CASE 517BX
ISSUE O
PIN ONE
REFERENCE
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.20 MM FROM TERMINAL TIP.
4. PACKAGE DIMENSIONS EXCLUSIVE OF
BURRS AND MOLD FLASH.
A B
D
ÉÉÉ
ÉÉÉ
ÉÉÉ
E
0.10 C
2X
2X
0.10 C
DIM
A
A1
A3
b
D
E
e
L
L1
TOP VIEW
A3
0.05 C
A
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.12
0.22
1.00 BSC
1.00 BSC
0.35 BSC
0.25
0.35
0.30
0.40
0.05 C
SIDE VIEW
A1
C
RECOMMENDED
SOLDERING FOOTPRINT*
SEATING
PLANE
5X
e
5X
0.48
L
6X
0.22
3
1
L1
1.18
6
4
6X
BOTTOM VIEW
b
0.10
M
C A B
0.05
M
C
0.53
1
PKG
OUTLINE
NOTE 3
0.35
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
MiniGate is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NLX1G97/D
Similar pages