CIT J104C2C24VDC.36S High sensitivity, super light weight Datasheet

J104
RoHS Compliant
20.0 (21.0) x 9.8 x 10.8 mm
E197851
Features
res
•
•
•
•
High sensitivity, super light weight
Conforms to FCC part 68
PC board mounting
Available bifurcated contacts for high reliability
Contact Data*
J104A & J104B - Bifurcated Contacts
Standard Version
J104C - Bifurcated Contacts
Low Cost Version
Contact Arrangement
2C = DPDT
2C = DPDT
Contact Rating
2A @ 30VDC
1A @ 24VDC
3A @ 30VDC N.O.
1A @ 125VAC
.6A @ 125VAC
Contact Resistance
< 50 milliohms initial
< 50 milliohms initial
Contact Material
AgNi + Au clad
Ag
Maximum Switching Power
60W, 75VA
24W, 125VA
Maximum Switching Voltage
250VAC, 220VDC
250VAC, 220VDC
Maximum Switching Current
3A
3A
Coil Data*
Coil Voltage
VDC
Coil
Resistance
Ω +/- 10%
Pick Up Voltage Release Voltage
VDC (max)
VDC (min)
75% of rated
voltage
10% of rated
voltage
Rated
Max
.15W
.20W
.36W
.40W
.51W
.55W
3
3.9
60
45
25
23
17.6
16
2.25
.3
5
6.5
167
125
56
63
39.7
45
3.75
.5
9
11.7
540
405
100
203
70.6
140
6.75
.9
12
15.6
960
720
400
360
282
280
9.00
1.2
24
31.2
N/A
2880
1600
1440
1129
1070
18.00
2.4
48
62.4
N/A
11.5K
N/A
5760
4518
3900
36.00
4.8
Coil
Power
W
Operate
Time
ms
Release
Time
ms
.15
.20
.36
.40
.51
.55
4.5
1.5
General Data*
*
Electrical Life @ rated load
500K cycles, average
Mechanical Life
100M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength
J104A & J104B
Coil to Contact 1500V rms min. initial
Contact to Contact 1000V rms min. initial
J104C
Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is
recommended to test actual load conditions for the application. It is
the user’s responsibility to determine the performance suitability for
their specific application. The use of any coil voltage less than the
rated coil voltage may compromise the operation of the relay.
1000V rms min. initial
500V rms min. initial
100m/s2 for 11 ms
Shock Resistance
Vibration Resistance
1.50mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
5N
Operating Temperature
-40oC to +85oC
Storage Temperature
-40oC to +155oC
Solderability
260oC for 5 s
Weight
4.5g
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
J104
Ordering Information
1. Series
J104A
2C
12VDC
.55
S
J104A **.40W, .55W coil power only
J104B **.15W, .20W coil power only
J104C **.20W, .36W, .51W coil power only
(only available on 5, 12 & 24 VDC coil)
2. Contact Arrangement
2C = DPDT
3. Coil Voltage
3VDC
5VDC
9VDC
12VDC
24VDC **not available with .15W coil power
48VDC **not available with .15W or .36W coil power
4. Coil Power
J104A
.40 = .40W
.55 = .55W
J104B
.15 = .15W
.20 = .20W
J104C
.20 = .20W
.36 = .36W
.51 = .51W
5. Sealed
S = Sealed (standard)
Dimensions
Units = mm
20.18
[.79]
9.95
[.39]
20.30
[.80]
10.60
[.42]
10.95
[.43]
7.62
[.30]
0.50 TYP
[.02]
5.08
[.20]
5.08
[.20]
1.20
[.05]
1.17
[.05]
7.62
[.30]
10.00
[.39]
11.45
[.45]
11.20
[.44]
7.62
[.30]
3.55 TYP
[.14]
(2X) 0.40
[.02]
5.08
[.20]
5.08
[.20]
1.26
[.05]
1.19
[.05]
0.50 TYP
[.02]
J104A & J104B
www.citrelay.com
3.45 TYP
[.14]
0.30 TYP
[.01]
0.30 TYP
[.01]
page 1
7.62
[.30]
J104C
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
Specifications and availability subject to change without notice.
J104
Schematics & PC Layouts
Bottom Views
7.62
[.30]
5.08
[.20]
Ø1.00 TYP
[.04]
7.62
[.30]
5.08
[.20]
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
Similar pages