Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FS Type : A Features Country of origin ● Low ESR, Miniaturized (1 size smaller than ● Endurance : 105 °C 5000 h to 10000 h ● RoHS compliant series FR) ● Malaysia Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life –40 °C to +105 °C 6.3 V.DC to 50 V.DC 27 µF to 10000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes V.DC 6.3 10 16 25 35 50 (max.) (120 Hz/+20 °C) tan d 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 µF for products of 1000 µF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 05×11/ 06.3×11.2 : 5000 hours, 08×11.5/ 010×12.5 : 6000 hours 08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours 010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current Rated voltage (V.DC) 6.3 to 50 Capacitance (µF) 27 47 390 1200 60 0.45 0.60 0.65 0.75 to 33 to 330 to 1000 to 10000 Frequency (Hz) 1k 0.75 0.85 0.90 0.95 120 0.55 0.70 0.75 0.80 10 k 0.90 0.95 0.98 1.00 100 k to 1.00 1.00 1.00 1.00 Sleeve Pressure relief 06.3 < fd±0.05 Dimensions < 08 010 < + L✽ ✽ 0D L 0d F 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 L < 16 : L±1.5 L > 20 : L±2.0 5 — 0.5 2.0 (Unit : mm) 6.3 — 0.5 2.5 8 — 0.6 3.5 10 — 0.6 5.0 12.5 12.5 to 25 30 to 35 0.6 0.8 5.0 5.0 16 — 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 May. 2017 Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/ Impedance/ Ripple current Rated voltage (V.DC) Case size (mm) (0D×L) 5 × 11 6.3 V.DC to 35 V.DC Impedance (Ω/100 kHz) +20 °C –10 °C 50 V.DC Ripple current (mA r.m.s./100 kHz) +105 °C Impedance (Ω/100 kHz) Ripple current (mA r.m.s./100 kHz) +20 °C –10 °C 1.130 +105 °C 0.300 1.000 280 0.340 6.3 × 11.2 0.130 0.430 455 – – – 8 × 11.5 0.056 0.168 950 – – – 8 × 15 0.041 0.123 1240 0.045 0.135 1140 8 × 20 0.030 0.090 1560 0.033 0.099 1430 10 × 12.5 0.043 0.114 1290 – – – 10 × 16 0.028 0.078 1790 – – – 10 × 20 0.020 0.057 2180 0.023 0.069 1890 10 × 25 0.018 0.054 2470 0.022 0.066 2150 12.5 × 20 0.018 0.045 2600 – – 12.5 × 25 0.015 0.038 3190 0.018 0.045 2660 12.5 × 30 0.013 0.033 3630 0.016 0.040 3160 12.5 × 35 0.012 0.030 3750 0.014 0.035 3270 16 × 20 0.017 0.043 3300 – – 16 × 25 0.014 0.035 3820 0.040 3320 – – 0.016 250 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 May. 2017 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 220 1500 1800 2000 6.3 2200 2700 3300 3900 4700 5100 5600 6200 6800 7500 8200 9100 10000 180 330 820 1000 1200 1800 10 2000 2200 2700 3600 4700 5100 5600 7500 8200 0D L 5 8 10 8 8 10 10 10 10 10 12.5 12.5 12.5 12.5 12.5 12.5 16 12.5 16 16 16 5 6.3 8 10 8 10 8 10 10 10 10 12.5 12.5 12.5 12.5 16 12.5 16 11 15 12.5 20 20 16 16 20 20 25 20 25 25 30 30 35 20 35 20 25 25 11 11.2 11.5 12.5 15 12.5 20 16 20 20 25 20 25 30 30 20 35 35 Specification Lead length (mm) Ripple Lead space Impedance current Endurance Lead (100 kHz) (100 kHz) (hours) dia. Taping Taping (+20 °C) (+105 °C) 0d Straight ✽B ✽H (Ω) (mA r.m.s.) 280 0.300 5000 0.5 2.0 5.0 2.5 1240 0.041 8000 0.6 3.5 5.0 1290 0.043 6000 0.6 5.0 5.0 1560 0.030 9000 0.6 3.5 5.0 1560 0.030 9000 0.6 3.5 5.0 1790 0.028 8000 0.6 5.0 5.0 1790 0.028 8000 0.6 5.0 5.0 2180 0.020 10000 0.6 5.0 5.0 2180 0.020 10000 0.6 5.0 5.0 2470 0.018 10000 0.6 5.0 5.0 2600 0.018 10000 0.6 5.0 5.0 3190 0.015 10000 0.6 5.0 5.0 3190 0.015 10000 0.6 5.0 5.0 3630 0.013 10000 0.8 5.0 3630 0.013 10000 0.8 5.0 3750 0.012 10000 0.8 5.0 3300 0.017 10000 0.8 7.5 7.5 3750 0.012 10000 0.8 5.0 3300 0.017 10000 0.8 7.5 7.5 3820 0.014 10000 0.8 7.5 7.5 3820 0.014 10000 0.8 7.5 7.5 280 0.300 5000 0.5 2.0 5.0 2.5 455 0.130 5000 0.5 2.5 5.0 2.5 950 0.056 6000 0.6 3.5 5.0 1290 0.043 6000 0.6 5.0 5.0 1240 0.041 8000 0.6 3.5 5.0 1290 0.043 6000 0.6 5.0 5.0 1560 0.030 9000 0.6 3.5 5.0 1790 0.028 8000 0.6 5.0 5.0 2180 0.020 10000 0.6 5.0 5.0 2180 0.020 10000 0.6 5.0 5.0 2470 0.018 10000 0.6 5.0 5.0 2600 0.018 10000 0.6 5.0 5.0 3190 0.015 10000 0.6 5.0 5.0 3630 0.013 10000 0.8 5.0 3630 0.013 10000 0.8 5.0 3300 0.017 10000 0.8 7.5 7.5 3750 0.012 10000 0.8 5.0 3820 0.014 10000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFS0J221( ) EEUFS0J152L( ) EEUFS0J152( ) EEUFS0J182L( ) EEUFS0J202L( ) EEUFS0J202( ) EEUFS0J222( ) EEUFS0J272( ) EEUFS0J332( ) EEUFS0J392L( ) EEUFS0J472( ) EEUFS0J512( ) EEUFS0J562( ) EEUFS0J622L EEUFS0J682L EEUFS0J752L EEUFS0J752S( ) EEUFS0J822L EEUFS0J822S( ) EEUFS0J912( ) EEUFS0J103( ) EEUFS1A181( ) EEUFS1A331( ) EEUFS1A821( ) EEUFS1A102( ) EEUFS1A122L( ) EEUFS1A122( ) EEUFS1A182L( ) EEUFS1A182( ) EEUFS1A202( ) EEUFS1A222( ) EEUFS1A272L( ) EEUFS1A362( ) EEUFS1A472( ) EEUFS1A512L EEUFS1A562L EEUFS1A562S( ) EEUFS1A752L EEUFS1A822( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 2000 1000 500 1000 1000 500 500 500 500 500 500 500 500 250 250 250 250 2000 2000 1000 500 1000 500 1000 500 500 500 500 500 500 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 May. 2017 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 120 510 820 1200 16 25 35 50 1800 2200 2400 3300 3600 3900 4700 5100 6200 1200 2200 3300 3900 330 820 1000 1500 1800 2700 27 150 220 330 390 680 820 1000 1200 0D L 5 8 8 10 8 10 10 10 12.5 12.5 12.5 12.5 16 12.5 16 10 12.5 12.5 16 8 10 10 12.5 16 16 5 8 8 10 10 12.5 12.5 12.5 16 11 11.5 15 12.5 20 16 20 25 20 25 30 30 20 35 25 20 25 35 25 15 20 25 25 20 25 11 15 20 20 25 25 30 35 25 Specification Lead length (mm) Ripple Lead space Impedance current Endurance Lead (100 kHz) (100 kHz) (hours) dia. Taping Taping (+20 °C) (+105 °C) 0d Straight ✽B ✽H (Ω) (mA r.m.s.) 280 0.300 5000 0.5 2.0 5.0 2.5 950 0.056 6000 0.6 3.5 5.0 1240 0.041 8000 0.6 3.5 5.0 1290 0.043 6000 0.6 5.0 5.0 1560 0.030 9000 0.6 3.5 5.0 1790 0.028 8000 0.6 5.0 5.0 2180 0.020 10000 0.6 5.0 5.0 2470 0.018 10000 0.6 5.0 5.0 2600 0.018 10000 0.6 5.0 5.0 3190 0.015 10000 0.6 5.0 5.0 3630 0.013 10000 0.8 5.0 3630 0.013 10000 0.8 5.0 3300 0.017 10000 0.8 7.5 7.5 3750 0.012 10000 0.8 5.0 3820 0.014 10000 0.8 7.5 7.5 2180 0.020 10000 0.6 5.0 5.0 3190 0.015 10000 0.6 5.0 5.0 3750 0.012 10000 0.8 5.0 3820 0.014 10000 0.8 7.5 7.5 1240 0.041 8000 0.6 3.5 5.0 2180 0.020 10000 0.6 5.0 5.0 2470 0.018 10000 0.6 5.0 5.0 3190 0.015 10000 0.6 5.0 5.0 3300 0.017 10000 0.8 7.5 7.5 3820 0.014 10000 0.8 7.5 7.5 250 0.340 5000 0.5 2.0 5.0 2.5 1140 0.045 8000 0.6 3.5 5.0 1430 0.033 9000 0.6 3.5 5.0 1890 0.023 10000 0.6 5.0 5.0 2150 0.022 10000 0.6 5.0 5.0 3660 0.018 10000 0.6 5.0 5.0 3160 0.016 10000 0.8 5.0 3270 0.014 10000 0.8 5.0 3320 0.016 10000 0.8 7.5 7.5 Min. Packaging Q'ty Part No. EEUFS1C121( ) EEUFS1C511( ) EEUFS1C821L( ) EEUFS1C821( ) EEUFS1C122L( ) EEUFS1C122( ) EEUFS1C182( ) EEUFS1C222L( ) EEUFS1C242( ) EEUFS1C332( ) EEUFS1C362L EEUFS1C392L EEUFS1C472S( ) EEUFS1C512L EEUFS1C622( ) EEUFS1E122( ) EEUFS1E222( ) EEUFS1E332L EEUFS1E392( ) EEUFS1V331L( ) EEUFS1V821( ) EEUFS1V102L( ) EEUFS1V152( ) EEUFS1V182S( ) EEUFS1V272( ) EEUFS1H270( ) EEUFS1H151L( ) EEUFS1H221L( ) EEUFS1H331( ) EEUFS1H391L( ) EEUFS1H681( ) EEUFS1H821L EEUFS1H102L EEUFS1H122( ) Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 200 200 100 100 200 200 200 200 100 100 200 200 200 200 200 200 100 100 100 2000 1000 1000 500 1000 500 500 500 500 500 250 250 500 500 250 1000 500 500 500 250 250 2000 1000 1000 500 500 500 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 May. 2017