AD ADXL316 Small, low power, 3-axis plus minus16 g accelerometer Datasheet

Small, Low Power,
3-Axis ±16 g Accelerometer
ADXL316
Data Sheet
FEATURES
GENERAL DESCRIPTION
3-axis sensing with ±16 g minimum measurement range
Small, low profile package
12-lead, 4 mm × 4 mm × 1.45 mm LFCSP
Low quiescent supply current: 350 µA typical
Single-supply operation: 1.8 V to 3.6 V
10,000 g shock survival
Excellent temperature stability
Bandwidth (BW) adjustment with a single capacitor per axis
RoHS/WEEE lead-free compliant
−40°C to +105°C operating temperature range
Qualified for automotive applications
The ADXL316 is a small, thin, low power, complete 3-axis
accelerometer with signal conditioned voltage outputs, all on a
single monolithic IC. The product measures acceleration with a
minimum measurement range of ±16 g. It can measure the
static acceleration of gravity in tilt sensing applications, as well
as dynamic acceleration resulting from motion, shock, or
vibration.
The user selects the bandwidth of the accelerometer using
the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins.
Bandwidths can be selected to suit the application, with a
range of 0.5 Hz to 1600 Hz for the x and y axes, and a range
of 0.5 Hz to 550 Hz for the z axis.
APPLICATIONS
The ADXL316 is available in a small, low profile, 4 mm × 4 mm ×
1.45 mm, 12-lead, plastic lead frame chip scale package (LFCSP).
Cost-sensitive, low power, motion and tilt sensing
applications
Mobile devices
Gaming systems
Disk drive protection
Image stabilization
Active noise control (ANC)
Sports and health devices
FUNCTIONAL BLOCK DIAGRAM
3V
VS
RFILT
ADXL316
CDC
OUTPUT AMP
3-AXIS
SENSOR
AC
AMP
DEMOD
CX
RFILT
OUTPUT AMP
ZOUT
CZ
ST
13686-001
COM
YOUT
CY
RFILT
OUTPUT AMP
XOUT
Figure 1.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADXL316
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications Information .............................................................. 11
Applications ....................................................................................... 1
Power Supply Decoupling ......................................................... 11
General Description ......................................................................... 1
Setting the Bandwidth Using CX, CY, and CZ .......................... 11
Functional Block Diagram .............................................................. 1
Self Test ........................................................................................ 11
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Design Trade-Offs for Selecting Filter Characteristics: The
Noise/BW Trade-Off .................................................................. 11
Absolute Maximum Ratings ............................................................ 4
Use with Operating Voltages other than 3 V .............................. 12
ESD Caution .................................................................................. 4
Axes of Acceleration Sensitivity ............................................... 12
Pin Configuration and Function Descriptions ............................. 5
Layout and Design Recommendations........................................ 13
Typical Performance Characteristics ............................................. 6
Outline Dimensions ....................................................................... 14
Theory of Operation ...................................................................... 10
Ordering Guide .......................................................................... 14
Mechanical Sensor...................................................................... 10
Automotive Products ................................................................. 14
Performance ................................................................................ 10
REVISION HISTORY
10/15—Revision 0: Initial Version
Rev. 0 | Page 2 of 14
Data Sheet
ADXL316
SPECIFICATIONS
TA = 25°C, VS = 3 V, CX = CY = CZ = 0.1 µF, acceleration = 0 g, unless otherwise noted. All minimum and maximum specifications are
guaranteed. Typical specifications are not guaranteed.
Table 1.
Parameter
SENSOR INPUT
Measurement Range1
Nonlinearity
Package Alignment Error
Interaxis Alignment Error
Cross Axis Sensitivity
SENSITIVITY (RATIOMETRIC)2
Sensitivity at XOUT, YOUT, and ZOUT
Sensitivity Change due to Temperature3
ZERO g BIAS LEVEL (RATIOMETRIC)
0 g Voltage at XOUT, YOUT, and ZOUT
Initial 0 g Output Deviation from Ideal
0 g Offset vs. Temperature
NOISE PERFORMANCE
Output Noise
Noise Density
XOUT and YOUT
ZOUT
FREQUENCY RESPONSE4
XOUT and YOUT Bandwidth5
ZOUT Bandwidth 5
RFILT Tolerance
Sensor Resonant Frequency
SELF TEST (ST)6
Logic Input Low
Logic Input High
ST Input Resistance to Ground
Output Change
At XOUT
At YOUT
At ZOUT
OUTPUT AMPLIFIER
Output Swing
Low
High
POWER SUPPLY
Operating Voltage Range
Quiescent Supply Current
Turn-On Time7
OPERATING TEMPERATURE RANGE
Test Conditions/Comments
Each axis
Min
Typ
±16
±19
±0.2
±1
±0.1
±1
50
57
±0.5
64
mV/g
mV
1.2
1.5
±100
±1
1.8
V
mV
mg/°C
% of measurement range
Each axis
VS = 3 V
VS = 3 V
Each axis
VS = 3 V, 25°C
VS = 3 V, 25°C
<4 kHz, VS = 3 V
No external filter
No external filter
27
Max
Unit
g
%
Degrees
Degrees
%
1
mV
210
450
µg/√Hz rms
µg/√Hz rms
1600
550
32
4.2
Hz
Hz
kΩ
kHz
2.7
30
50
−65
35
70
−50
50
90
37
0.3
V
V
kΩ
−35
65
110
mV
mV
mV
ST = 0 to ST = 1
No load
No load
0.1
2.8
1.8
V
V
3.6
350
10
−40
1
+105
V
µA
ms
°C
Guaranteed by measurement of initial offset and sensitivity.
Sensitivity is essentially ratiometric to VS. Calculate sensitivity by using a scale factor (mV/V/g). Sensitivity = Scale Factor × VS. To calculate minimum and maximum
sensitivity, the scale factors are 15 mV/V/g and 23 mV/V/g, respectively.
3
This parameter is defined as the output change from ambient to maximum temperature or ambient to minimum temperature.
4
Actual frequency response controlled by user-supplied external filter capacitors (CX, CY, and CZ).
5
Bandwidth = 1/(2 × π × 32 kΩ × C). For CX, CY = 0.003 µF, the bandwidth = 1.6 kHz. For CZ = 0.01 µF, the bandwidth = 500 Hz. For CX, CY, and CZ = 10 µF, the bandwidth = 0.5 Hz.
6
Self test response changes cubically with VS.
7
Larger values of CX, CY, and CZ increase turn-on time. Turn-on time is approximately 160 × (CX, CY, and CZ) + 4 ms, where CX, CY, CZ are in µF.
2
Rev. 0 | Page 3 of 14
ADXL316
Data Sheet
ABSOLUTE MAXIMUM RATINGS
ESD CAUTION
Table 2.
Parameter
Acceleration
Shock Survival, Any Axis, and Unpowered
Shock Survival, Any Axis, and Powered
VS
All Other Pins
Output Short-Circuit Duration (Any Pin to COM)
Temperature Range (Powered)
Rating
10,000 g
10,000 g
−0.3 V to +3.6 V
(COM − 0.3 V) to
(VS + 0.3 V)
Indefinite
−55°C to +125°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Rev. 0 | Page 4 of 14
Data Sheet
ADXL316
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
ADXL316
11 DNC
10 DNC
12 VS
TOP VIEW
(Not to Scale)
9 XOUT
DNC 1
8 YOUT
7 DNC
NOTES
1. DNC = DO NOT CONNECT. DO NOT
CONNECT TO THIS PIN.
2. THE EXPOSED PAD IS NOT INTERNALLY
CONNECTED. SOLDER FOR
MECHANICAL INTEGRITY.
13686-002
DNC 4
COM 3
DNC 5
+Z
+X
+Y
ZOUT 6
ST 2
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Mnemonic
DNC
ST
COM
DNC
DNC
ZOUT
DNC
YOUT
XOUT
DNC
DNC
VS
EP
Description
Do Not Connect.
Self Test.
Ground.
Do Not Connect.
Do Not Connect.
Z Channel Output.
Do Not Connect.
Y Channel Output.
X Channel Output.
Do Not Connect.
Do Not Connect.
Supply Voltage (1.8 V to 3.6 V).
Exposed Pad. The exposed pad is not internally connected. Solder for mechanical integrity.
Rev. 0 | Page 5 of 14
ADXL316
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
30
50
25
40
20
30
20
15
10
10
5
0
0
13686-003
OUTPUT (V)
–65 –63 –61 –59 –57 –55 –53 –51 –49 –47 –45 –43 –41 –39 –37 –35
SELF TEST (mV)
Figure 3. X-Axis Zero g Bias at 25°C, VS = 3 V
13686-006
POPULATION (%)
60
1.40
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.56
1.57
1.58
1.59
1.60
POPULATION (%)
N (number of devices tested) > 1000 for all typical performance plots, unless otherwise noted.
Figure 6. X-Axis Self Test Response at 25°C, VS = 3 V
70
25
60
20
POPULATION (%)
POPULATION (%)
50
40
30
15
10
20
5
35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65
SELF TEST (mV)
Figure 7. Y-Axis Self Test Response at 25°C, VS = 3 V
Figure 4. Y-Axis Zero g Bias at 25°C, VS = 3 V
18
16
16
14
14
12
POPULATION (%)
12
10
8
6
10
8
6
0
0
OUTPUT (V)
SELF TEST (mV)
Figure 5. Z-Axis Zero g Bias at 25°C, VS = 3 V
Figure 8. Z-Axis Self Test Response at 25°C, VS = 3 V
Rev. 0 | Page 6 of 14
13686-008
2
13686-005
2
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
102
104
106
108
110
4
4
1.40
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.56
1.57
1.58
1.59
1.60
POPULATION (%)
13686-007
OUTPUT (V)
0
13686-004
0
1.40
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.56
1.57
1.58
1.59
1.60
10
Data Sheet
ADXL316
1.55
12
N > 100
N=8
1.53
8
OUTPUT (V)
6
1.51
1.49
4
1.47
2
–10–9 –8 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 8 9 10
TEMPERATURE COEFFICIENT (mg/°C)
1.45
–40
13686-009
0
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 9. X-Axis Zero g Bias Temperature Coefficient, VS = 3 V
13686-012
POPULATION (%)
10
Figure 12. X-Axis Zero g Bias vs. Temperature
1.55
14
N > 100
N=8
12
1.53
OUTPUT (V)
POPULATION (%)
10
8
6
1.51
1.49
4
1.47
–10–9 –8 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 8 9 10
TEMPERATURE COEFFICIENT (mg/°C)
1.45
–40
13686-010
0
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 10. Y-Axis Zero g Bias Temperature Coefficient, VS = 3 V
13686-013
2
Figure 13. Y-Axis Zero g Bias vs. Temperature
1.55
18
N > 100
N=8
16
1.53
OUTPUT (V)
12
10
8
1.51
1.49
6
4
1.47
0
–10–9 –8 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 8 9 10
TEMPERATURE COEFFICIENT (mg/°C)
1.45
–40
–20
0
20
40
60
80
TEMPERATURE (°C)
Figure 11. Z-Axis Zero g Bias Temperature Coefficient, VS = 3 V
Figure 14. Z-Axis Zero g Bias vs. Temperature
Rev. 0 | Page 7 of 14
100
13686-014
2
13686-011
POPULATION (%)
14
ADXL316
Data Sheet
25
64
N=8
62
20
SENSITIVITY (mV)
POPULATION (%)
60
15
10
58
56
54
5
50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
SENSITIVITY (mV/g)
50
–40
13686-015
0
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 15. X-Axis Sensitivity at 25°C, VS = 3 V
13686-018
52
Figure 18. X-Axis Sensitivity vs. Temperature, VS = 3 V
64
25
N=8
62
20
SENSITIVITY (mV)
POPULATION (%)
60
15
10
58
56
54
5
50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
SENSITIVITY (mV/g)
50
–40
13686-016
0
–20
0
20
40
60
80
100
TEMPERATURE (°C)
Figure 16. Y-Axis Sensitivity at 25°C, VS = 3 V
13686-019
52
Figure 19. Y-Axis Sensitivity vs. Temperature, VS = 3 V
35
64
30
62
25
60
15
58
56
10
54
5
52
0
50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
SENSITIVITY (mV/g)
50
–40
–20
0
20
40
60
80
TEMPERATURE (°C)
Figure 17. Z-Axis Sensitivity at 25°C, VS = 3 V
Figure 20. Z-Axis Sensitivity vs. Temperature, VS = 3 V
Rev. 0 | Page 8 of 14
100
13686-021
SENSITIVITY (mV)
20
13686-017
POPULATION (%)
N=8
Data Sheet
ADXL316
450
400
300
250
200
150
100
50
0
1.5
2.0
2.5
3.0
3.5
4.0
SUPPLY (V)
13686-022
CURRENT (μA)
350
Figure 21. Typical Current Consumption vs. Supply Voltage
Rev. 0 | Page 9 of 14
ADXL316
Data Sheet
THEORY OF OPERATION
The ADXL316 is a complete 3-axis acceleration measurement
system. The ADXL316 has a measurement range of ±16 g
minimum. It contains a polysilicon surface micromachined
sensor and signal conditioning circuitry to implement an openloop acceleration measurement architecture. The output signals
are analog voltages that are proportional to acceleration. The
accelerometer can measure the static acceleration of gravity in
tilt sensing applications as well as dynamic acceleration resulting
from motion, shock, or vibration.
The sensor is a polysilicon surface micromachined structure
built on top of a silicon wafer. Polysilicon springs suspend the
structure over the surface of the wafer and provide a resistance
against acceleration forces. Deflection of the structure is measured
using a differential capacitor that consists of independent fixed
plates and plates attached to the moving mass. The fixed plates
are driven by 180° out-of-phase square waves. Acceleration
deflects the moving mass and unbalances the differential
capacitor, resulting in a sensor output with an amplitude
proportional to acceleration. Phase-sensitive demodulation
techniques determine the magnitude and direction of the
acceleration.
A 32 kΩ resistor can amplify and bring the demodulator output
off-chip. The user then sets the signal bandwidth of the device
by adding a capacitor. This filtering improves measurement
resolution and helps prevent aliasing.
MECHANICAL SENSOR
The ADXL316 uses a single structure for sensing the X-, Y-, and
Z-axes. As a result, the three axes sense directions are highly
orthogonal with minimal cross axis sensitivity. Mechanical
misalignment of the sensor die to the package is the chief source
of cross axis sensitivity. Mechanical misalignment can be calibrated
out at the system level.
PERFORMANCE
Rather than using additional temperature compensation circuitry,
innovative design techniques ensure high performance is built-in
to the ADXL316. As a result, there is neither quantization error nor
nonmonotonic behavior, and temperature hysteresis is very low.
Rev. 0 | Page 10 of 14
Data Sheet
ADXL316
APPLICATIONS INFORMATION
POWER SUPPLY DECOUPLING
SELF TEST
For most applications, a single 0.1 µF capacitor, CDC, placed
close to the ADXL316 supply pins adequately decouples the
accelerometer from noise on the power supply. However, in
applications where noise is present at the 50 kHz internal clock
frequency (or any harmonic thereof), additional care in power
supply bypassing is required because this noise can cause errors
in acceleration measurement. If additional decoupling is needed,
a 100 Ω (or smaller) resistor or a ferrite bead can be inserted in
the supply line. Additionally, a larger bulk bypass capacitor
(1 µF or greater) can be added in parallel to CDC. Ensure that
the connection from the ADXL316 ground to the power supply
ground is low impedance, because noise transmitted through
ground has a similar effect as noise transmitted through VS.
The ST pin controls the self test feature. When this pin is connected
to VS, an electrostatic force is exerted on the accelerometer beam.
The resulting movement of the beam allows the user to test if
the accelerometer is functional. The typical change in output is
−0.88 g (corresponding to −50 mV) on the x-axis, 0.88 g (or
+50 mV) on the y-axis, and 1.58 g (or +90 mV) on the z-axis.
The ST pin may be left open circuit or connected to the common
pin (COM) in normal use.
SETTING THE BANDWIDTH USING CX, CY, AND CZ
The ADXL316 has provisions for band-limiting the XOUT, YOUT,
and ZOUT pins. Capacitors must be added at these pins to
implement low-pass filtering for antialiasing and noise
reduction. The equation for the −3 dB bandwidth is
f−3 dB = 1/(2π(32 kΩ) × C(X, Y, Z))
or more simply
f–3 dB = 5 µF/C(X, Y, Z)
The tolerance of the internal resistor (RFILT) can vary by as much
as ±15% of its nominal value (32 kΩ), and the bandwidth varies
accordingly. A minimum capacitance of 0.0047 µF for CX, CY,
and CZ is recommended in all cases.
Table 4. Filter Capacitor Selection, CX, CY, and CZ
Bandwidth (Hz)
1
10
50
100
200
500
Capacitor (µF)
4.7
0.47
0.10
0.05
0.027
0.01
Never expose the ST pin to voltages greater than VS + 0.3 V. If
this cannot be guaranteed due to the system design (for instance,
if there are multiple supply voltages), a low VF clamping diode
between ST and VS is recommended.
DESIGN TRADE-OFFS FOR SELECTING FILTER
CHARACTERISTICS: THE NOISE/BW TRADE-OFF
The selected accelerometer bandwidth ultimately determines
the measurement resolution (the smallest detectable acceleration).
Filtering can lower the noise floor to improve the resolution of
the accelerometer. Resolution is dependent on the analog filter
bandwidth at XOUT, YOUT, and ZOUT.
The output of the ADXL316 has a typical bandwidth of greater
than 500 Hz. The user must filter the signal at this point to limit
aliasing errors. The analog bandwidth must be no more than
half the analog-to-digital sampling frequency to minimize
aliasing. The analog bandwidth can decrease further to reduce
noise and improve resolution.
The ADXL316 has white Gaussian noise, which contributes
equally at all frequencies and is described in terms of µg/√Hz
(the noise is proportional to the square root of the accelerometer
bandwidth). Limit bandwidth to the lowest frequency needed
by the application to maximize the resolution and dynamic
range of the accelerometer.
With the single-pole roll-off characteristic, the typical rms noise
of the ADXL316 is determined by
RMS Noise = Noise Density × ( BW × 1.6 )
Often, the peak value of the noise is desired. Statistical methods
can only estimate peak-to-peak noise. Table 5 is useful for
estimating the probabilities of exceeding various peak values,
given the rms value.
Table 5. Estimation of Peak-to-Peak Noise
Peak-to-Peak Value
2 × rms
4 × rms
6 × rms
8 × rms
Rev. 0 | Page 11 of 14
% of Time that Noise Exceeds
Nominal Peak-to-Peak Value
32
4.6
0.27
0.006
ADXL316
Data Sheet
USE WITH OPERATING VOLTAGES OTHER THAN 3 V
The supply current decreases as the supply voltage decreases.
Typical current consumption at VS = 3.6 V is 400 µA, and
typical current consumption at VS = 2 V is 300 µA.
The ADXL316 is tested and specified at VS = 3 V; however, it
can be powered with VS as low as 1.8 V or as high as 3.6 V. Note
that some performance parameters change as the supply voltage
is varied.
AXES OF ACCELERATION SENSITIVITY
Figure 22 shows the axes of acceleration (AX, AY, and AZ)
sensitivity, corresponding output voltage increases when
accelerated along the sensitive axis.
The ADXL316 outputs are ratiometric, so the output sensitivity
(or scale factor) is proportional to the supply voltage. At VS =
3.6 V, the output sensitivity is typically 78 mV/g. At VS = 2 V, the
output sensitivity is typically 42 mV/g.
AZ
The zero g bias output is also ratiometric, so the zero g output is
nominally equal to VS/2 at all supply voltages.
Self test response in g is roughly proportional to the square of
the supply voltage. However, when ratiometricity of sensitivity
is factored in with supply voltage, the self test response in volts
is roughly proportional to the cube of the supply voltage. For
example, at VS = 3.6 V, the self test response for the ADXL316 is
approximately −86 mV for the x-axis, +86 mV for the y-axis,
and +162 mV for the z-axis. At VS = 2 V, the self test response is
approximately −14 mV for the x-axis, +14 mV for the y-axis,
and +28 mV for the z-axis.
AX
Figure 22. Axes of Acceleration (AX, AY, and AZ) Sensitivity
XOUT = +1g
YOUT = 0g
ZOUT = 0g
TOP
TOP
XOUT = 0g
YOUT = +1g
ZOUT = 0g
XOUT = –1g
YOUT = 0g
ZOUT = 0g
XOUT = 0g
YOUT = 0g
ZOUT = +1g
Figure 23. Output Response vs. Orientation to Gravity
Rev. 0 | Page 12 of 14
XOUT = 0g
YOUT = 0g
ZOUT = –1g
13686-024
TOP
XOUT = 0g
YOUT = –1g
ZOUT = 0g
TOP
GRAVITY
13686-023
AY
The output noise is not ratiometric but is absolute in volts;
therefore, the noise density decreases as the supply voltage
increases. This decrease is because the scale factor (mV/g)
increases while the noise voltage remains constant. At VS = 3.6 V,
the x-axis and y-axis noise density is typically 150 µg/√Hz,
while at VS = 2 V, the x-axis and y-axis noise density is typically
280 µg/√Hz.
Data Sheet
ADXL316
LAYOUT AND DESIGN RECOMMENDATIONS
The recommended soldering profile is shown in Figure 24, followed by a description of the recommended soldering profile features in Table 6.
CRITICAL ZONE
TL TO TP
tP
TP
tL
TSMAX
TSMIN
tS
RAMP-DOWN
PREHEAT
13686-025
TEMPERATURE
RAMP-UP
TL
t25°C TO PEAK
TIME
Figure 24. Recommended Soldering Profile
Table 6. Recommended Soldering Profile
Profile Feature
Average Ramp Rate (TL to TP)
Preheat
Minimum Temperature (TSMIN)
Maximum Temperature (TSMAX)
Time (TSMIN to TSMAX), tS
TSMAX to TL
Ramp-Up Rate
Time Maintained Above Liquidous (TL)
Liquidous Temperature (TL)
Time (tL)
Peak Temperature (TP)
Time within 5°C of Actual Peak Temperature (tP)
Ramp-Down Rate
Time 25°C (t25°C) to Peak Temperature
Rev. 0 | Page 13 of 14
Sn63/Pb37
3°C/sec maximum
Pb-Free
3°C/sec maximum
100°C
150°C
60 sec to 120 sec
150°C
200°C
60 sec to 180 sec
3°C/sec maximum
3°C/sec maximum
183°C
60 sec to 150 sec
240°C + 0°C/−5°C
10 sec to 30 sec
6°C/sec maximum
6 minutes maximum
217°C
60 sec to 150 sec
260°C + 0°C/−5°C
20 sec to 40 sec
6°C/sec maximum
8 minutes maximum
ADXL316
Data Sheet
OUTLINE DIMENSIONS
PIN 1
INDICATOR
4.10
4.00 SQ
3.90
0.40
0.35
0.30
0.55
0.50
0.45
PIN 1
INDICATOR
12
10
1.00
BSC
9
1
2.20
2.10
2.00
EXPOSED
PAD
0.33 MIN
7
TOP VIEW
1.50
1.45
1.40
0.58
0.50
0.44
3
BOTTOM VIEW
2.60
2.50
2.40
0.05 MAX
0.02 NOM
COPLANARITY
0.08
0.152 REF
0.20 MIN
0.23
0.15
0.07
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
PKG-004624
10-17-2014-A
SEATING
PLANE
4
6
Figure 25. 12-Lead Lead Frame Chip Scale Package [LFCSP_SS]
4 mm × 4 mm Body and 1.45 Package Height, With Side Solderable Leads
(CS-12-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
ADXL316WBCSZ
ADXL316WBCSZ-RL
ADXL316WBCSZ-RL7
1
Measurement Range (g)
±16
±16
±16
Specified Voltage (V)
3
3
3
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Package Description
12-Lead LFCSP_SS
12-Lead LFCSP_SS
12-Lead LFCSP_SS
Package
Option
CS-12-3
CS-12-3
CS-12-3
Z = RoHS Compliant Part.
AUTOMOTIVE PRODUCTS
The ADXL316W models are available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D13686-0-10/15(0)
Rev. 0 | Page 14 of 14
Similar pages