Omron G6KU-2F-RF-T Surface mount, 1ghz / 3 ghz miniature dpdt, high frequency relay Datasheet

High Frequency Relay
G6K-RF
Surface Mount, 1GHz / 3 GHz Miniature
DPDT, High Frequency Relay
• New Models with 3 GHz band available (“-T” versions)
• Space-saving 1 GHz version with smaller ground terminal footprint
is available. (“-S” versions)
• Handles 1 A, 30 VDC discrete load and 1 W at 1GHz.
• Single-coil latching models available.
• Low coil power consumption: 100 mW.
• Ideal for instrumentation and high-speed LAN network equipment.
• RoHS Compliant
Ordering Information
PCB Footprint
Standard ground
terminal
(1GHz)
Max.Load
1 A at 30 VDC,
0.3 A at 125 VDC
Space-saving
ground terminal
(1 GHz)
Space-saving
ground terminal
(3GHz)
Coil Voltage
3 VDC
4.5 VDC
5 VDC
12 VDC
24 VDC
3 VDC
4.5 VDC
5 VDC
12 VDC
24 VDC
3 VDC
4.5 VDC
5 VDC
12 VDC
24 VDC
Non-Latching part number
G6K-2F-RF DC3
G6K-2F-RF DC4.5
G6K-2F-RF DC5
G6K-2F-RF DC12
G6K-2F-RF DC24
G6K-2F-RF-S DC3
G6K-2F-RF-S DC4.5
G6K-2F-RF-S DC5
G6K-2F-RF-S DC12
G6K-2F-RF-S DC24
G6K-2F-RF-T DC3
G6K-2F-RF-T DC4.5
G6K-2F-RF-T DC5
G6K-2F-RF-T DC12
G6K-2F-RF-T DC24
Single-coil latching part number
G6KU-2F-RF DC3
G6KU-2F-RF DC4.5
G6KU-2F-RF DC5
G6KU-2F-RF DC12
G6KU-2F-RF DC24
G6KU-2F-RF-S DC3
G6KU-2F-RF-S DC4.5
G6KU-2F-RF-S DC5
G6KU-2F-RF-S DC12
G6KU-2F-RF-S DC24
G6KU-2F-RF-T DC3
G6KU-2F-RF-T DC4.5
G6KU-2F-RF-T DC5
G6KU-2F-RF-T DC12
G6KU-2F-RF-T DC24
Note: The above listed models are packaged in trays of 300. They are also available in Tape and Reel packaging.
1. Place “-TR03” before the coil voltage to obtain Tape and Reel packaging, in quantities of 300 pieces per reel.
2. Place “-TR09” before the coil voltage to obtain Tape and Reel packaging, in quantities of 900 pieces per reel.
Examples: G6K-2F-RF-S-TR09 DC5
G6KU-2F-RF-TR03 DC12
3. “-TR03” and “-TR09” is only used to identify the tape quantity when ordering and is not marked on the product, itself.
Specifications
■ Contact Ratings
Load
Rated load
Rated carry current
Max. switching voltage
Max. switching current
Max. switching capacity
Resistive load
0.3 A at 125 VAC; 1 A at 30 VDC
1 W at 1 GHz (See note.)
1A
125 VAC, 60 VDC
1A
37.5 VA (AC); 30 W (DC)
Note: This value is for a load with V.S.W.R. ≤ 1.2
High Frequency Relay
G6K-RF
1
■ Coil Ratings
Rated voltage
Rated current
Coil resistance
3 VDC
4.5 VDC
5 VDC
12 VDC
24 VDC
33.0 mA
23.2 mA
21.1 mA
9.1 mA
4.6 mA
91 Ω
194 Ω
237 Ω
1,315 Ω
5,220 Ω
Must operate
voltage
80% max. of rated
voltage
Must release
Maximum voltage
Rated power
voltage
consumption
10% min. of rated 150% of rated voltage Approx. 100 mW
voltage
(75% max. of rated (75% max. of rated
set voltage for
reset voltage for
latching models)
latching models)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. The operating characteristics are measured at a coil temperature of 23°C.
3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.
■ High Frequency Characteristics
Isolation
between contacts of
the same pole
between contacts of
different poles
Insertion loss
V.S.W.R.
Maximum transmission capacity
Maximum switching capacity
Note: 1.
2.
3.
4.
1 GHz, all models
20 dB min.
3 GHz, “-T” models
18 dB min.
30 dB min.
25 dB min.
0.2 dB max.
1.2 max.
0.6 dB max.
1.4 max.
3 W (See note 3)
1 W (See note 3)
The impedance of the measurement system is 50 Ω.
The above values are initial
These values are for a load with V.S.W.R. ≤ 1.2
Contact Omron if the relay will be used in an application that requires high repeatability in high-frequency characteristics for the microload
region. (Such applications include Test and Measurement equipment and ATE applications.)
■ Characteristics
Item
Contact resistance (See note 2.)
Operating (set) time (See note 3.)
Release (reset) time (See note 3.)
Minimum set/reset pulse time
Insulation resistance (See note 4.)
Dielectric strength
Between coil and
contacts
Between contacts of
different poles
Between contacts of the
same pole
Between ground and
coil/contacts
Vibration resistance
Destruction
Shock resistance
3 ms max. (approx. 1.2 ms)
3 ms max. (approx. 1.2 ms)
10 ms
750 VAC, 50/60 Hz for 1 min
750 VAC, 50/60 Hz for 1 min
500 VAC, 50/60 Hz for 1 min
10 to 55 Hz, 5-mm double amplitude and 55 to 500 to 55 Hz, 300 m/s2
10 to 55 Hz, 3.3-mm double amplitude and 55 to 500 to 55 Hz, 200 m/s2
Destruction
1,000 m/s2
Malfunction
750 m/s2
50,000,000 operations min. (at a switching frequency of 36,000 operations/hour)
100,000 operations min. (at a switching frequency of 1,800 operations/hour)
Operating: −40°C to 70°C (with no icing or condensation)
Operating: 5% to 85%
Approx. 0.95 g
Mechanical
Electrical
Ambient operating temperature
Ambient operating humidity
Weight
2
Single-winding latching models
G6KU-2F-RF(-S)(-T)
Malfunction
Endurance
Note: 1.
2.
3.
4.
Single-side stable models
G6K-2F-RF(-S)(-T)
100 mΩ max.
3 ms max. (approx. 1.4 ms)
3 ms max. (approx. 1.3 ms)
--1,000 MΩ min. (at 500 VDC)
750 VAC, 50/60 Hz for 1 min
The above values are initial values.
The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
Values in parentheses are typical values.
The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.
High Frequency Relay
G6K-RF
Engineering Data
G6K-2F-RF
Agile HP 8753D
Vector Network
Analyzer
50 Ω
terminaltion
Average value (initial)
Test subject: G6K-2F-RF
10 Number of Units: 10
20
30
0
Return loss (dB)
0
Average value (initial)
Average value (initial)
Insertion loss (dB)
Isolation (dB)
High-frequency Characteristics
(Return Loss, V.S.W.R.)
G6K-2F-RF
High-frequency Characteristics
(Insertion Loss)
G6K-2F-RF
High-Frequency Characteristics
(Isolation)
G6K-2F-RF
Test subject: G6K-2F-RF
Number of Units: 10
0.1
0
10
0.2
1.8 V
·
S
1.7 W
R
Test subject: G6K-2F-RF
Number of Units: 5
20
1.6
30
1.5
40
40
1.4
Return loss
50
0.3
60
70
1.2
V.SWR
0.4
1.1
70
80
0.5
90
0.5
1
1.5
2
2.5
0
3
0.5
1
1.5
2.5
3
G6K-2F-RF-S
Insertion loss (dB)
Test subject: G6K-2F-RF-S
10 Number of Units: 10
20
30
0.5
1
1.5
2
2.5
3
Frequency (GHz)
G6K-2F-RF-S
Average value (initial)
Average value (initial)
Average value (initial)
0
1.0
0
Frequency (GHz)
Frequency (GHz)
G6K-2F-RF-S
2
80
0
Return loss (dB)
0
Isolation (dB)
1.3
50
60
Test subject: G6K-2F-RF-S
Number of Units: 10
0
10
0.1
0.2
1.8 V
·
S
1.7 W
R
Test subject: G6K-2F-RF-S
Number of Units: 5
20
1.6
30
1.5
40
1.4
40
Return loss
50
0.3
1.2
60
70
0.4
V.SWR
1.1
70
80
90
0.5
1
1.5
2
2.5
0.5
3
0
0.5
1
1.5
2.5
3
G6K-2F-RF-T
Insertion loss (dB)
N.O.
N.C.
Test subject: G6K-2F-RF-T
10 Number of Units: 5
20
30
0.5
1
1.5
2
0.0
2.5
3
Frequency (GHz)
G6K-2F-RF-T
Average value (initial)
Average value (initial)
Average value (initial)
0
1.0
0
Frequency (GHz)
Frequency (GHz)
G6K-2F-RF-T
2
80
N.O.
N.C.
Test subject: G6K-2F-RF-T
Number of Units: 5
0.2
0.4
Return loss (dB)
0
Isolation (dB)
1.3
50
60
0
10
2.6 V
·
S
2.4 W
R
N.O.
N.C.
Test subject: G6K-2F-RF-T
Number of Units: 5
20
2.2
30
2.0
40
40
0.6
1.6
50
60
V.SWR
60
70
1.8
Return loss
50
1.4
0.8
1.2
70
80
90
0
1
2
3
4
5
6
Frequency (GHz)
1.0
0
1
2
3
4
5
6
80
1.0
0
1
Frequency (GHz)
2
3
4
5
6
Frequency (GHz)
Note: 1. Refer to the G6K specification for basic specifications and characteristics not shown above
2. Ambient temperature condition: 23°C
3. The high-frequency characteristics depend on the mounting board. Be sure to check actual operation, including durability, in
actual equipment before use.
High Frequency Relay
G6K-RF
3
Dimensions
Note: All dimensions are in millimeters unless otherwise indicated
Mounting Dimensions
(Top View)
G6K-2F-RF
G6KU-2F-RF
Terminal Arrangement and
Internal Connections
(Top View)
Tolerance ±0.1 mm
G6K-2F-RF
7.6
Orientation mark
5.4
3.2
8
12.8
10.3
0.6
0.5
6.9
1.8
6
5
2
3
4
+
7
2.5
5.4
7
−
1
0.3
2.5
0.8
7.8
0.5
1.35
G6KU-2F-RF
(1.35)
3.2
5.4
7.6
Orientation mark
1.95
8
11.5
Note: 1. Each value has a tolerance of ±0.3 mm
2. The coplanarity of the terminals is 0.15 mm max.
Note: Check carefully the coil
polarity of the relay
Mounting Dimensions
(Top View)
G6K-2F-RF-S
G6KU-2F-RF-S
0.85
1.55
1.5
8.6
VDC JAPAN
1.2
1.6
7.5
2
5.4
8
7
6
5
2
3
4
−
2.1
1.8
7
1
G6KU-2F-RF-S
0.8
Orientation mark
1.8
1
7
8
3.2
5.4
7.6
Note: Check carefully the coil
polarity of the relay
Note: 1. Each value has a tolerance of ±0.3 mm
2. The coplanarity of the terminals is 0.15 mm max.
Mounting Dimensions
(Top View)
0.5
0.85
G6K-2F-RF-T
Tolerance ±0.1 mm
7.8
8.6
3
4
− +
SR
+ −
2
1
G6K-2F-RF-T
8
1.1
1.35
4-1.15
5
Orientation mark
5.4
3.2
VDC JAPAN
6
Terminal Arrangement and
Internal Connections
(Top View)
7.6
2.2
4
Orientation mark
5.4
3.2
(1.35)
0.3
0.85
3
6.9
0.6
G6K-2F-RF-T
G6KU-2F-RF-T
1
+
10.7
10.3
0.5
1.35
5
G6K-2F-RF-S
8.8
7.6
7.8
6
Terminal Arrangement and
Internal Connections
(Top View)
Tolerance ±0.1 mm
0.85
G6K-2F-RF-S
7
− +
SR
+ −
7
6
5
2
3
4
−
2.2
+
4.8
10.7
10.3
1
7
10.8
1.1
6.9
4.8
G6KU-2F-RF-T
Orientation mark
5.4
0.6
0.3
1.35
2.2 2.2
(2.45)
8
14-0.8
0.5
1.35
3.2
5.4
7.6
4
High Frequency Relay
Note: 1. Each value has a tolerance of ±0.3 mm
2. The coplanarity of the terminals is 0.15 mm max.
Note: Check carefully the coil
polarity of the relay
G6K-RF
7
6
5
3
4
− +
SR
+ −
1
2
Tape Packaging Specifications
• Add “-TR03” or “-TR09” before the coil voltage to order relays in Tape and Reel packaging. If “-TR03” or “-TR09” is not included, then the relays
will be provided in trays of 300 relays per tray.
- - Add “-TR03” to obtain 300 relays per reel
- - Add “-TR09” to obtain 900 relays per reel
1. Direction of Relay insertion
3. Carrier Tape Dimensions
G6K(U)-2F-RF
Top tape
(cover tape)
1.5+0.1
0 dia.
5.9±0.1
12±1.0
4±0.1
2±0.1
A
B
1.75±0.1
0.4±0.1
11.5±0.1
24±0.2
Carrier tape
Embossed
tape
13.4±0.1
10.9±0.1
0°
3°−1°
Pulling Direction
G6K(U)-2F-RF
Orientation mark
B-B Cross Section
B
G6K(U)-2F-RF-S(-T)
A
Orientation mark
4.25±0.1
0°
3°−1°
Pulling
direction
Pulling
direction
A-A Cross Section
8.5±0.1
G6K(U)-2F-RF-S
2. Reel Dimensions
1.5+0.1
0 dia.
29.5±1
5.9±0.1
12±0.1
4±0.1
2±0.1
A
B
1.75±0.1
0.4±0.05
25.5±0.5
11.5±0.1
24±0.3
13±0.2 dia.
2±0.5
21±0.8 dia.
A
11.3±0.1
3° max.
330
B-B Cross Section
B
80
A
R1
3° max. 9.2±0.1
Enlarged View of Section A
A-A Cross Section
High Frequency Relay
G6K-RF
5
Precautions
■ Recommended Soldering Method
2. Temperature Profile for Lead-free Solder (Measured at the PCB)
Temperature (°C)
Temperature (°C)
1. Temperature Profile for Lead Solder (Measured at the PCB)
250 max.
Soldering
220 to
245
Case top panel
(peak): 255°C max.
Soldering
230
180
180 to
200
Preheating
150
Preheating
150
Relay terminal
section
120 max.
90 to 120
30 max.
Time (s)
20 to 30
Time (s)
3. The thickness of cream solder to be applied should be between 200 and 250 μm and the land pattern should be based on Omron’s recommended
PCB pattern. To maintain the correct soldering joint shown in the following diagram, we recommend applying solder using the soldering conditions
shown above. Check the soldering in the actual mounting conditions prior to use.
Correct Soldering
Incorrect Soldering
Relay
Terminal
Land
Heel fillet
is formed
PCB
Excessive amount
of solder
Insufficient amount
of solder
Solder
■ Precautions for correct use
Be sure to read the precautions and information common to all Electromechanical Relays, contained in the Technical User's Guide, "Electromechanical Relays, Technical Information, for correct use.
Relay Handling
Claw Securing Force During Automatic Mounting
Do not unpack the relay until ready to mount it. Use the relay as soon as
possible after opening the moisture-proof bag. Otherwise, the terminals
may tarnish and seal failure may occur after the solder process.
During automatic insertion of relays, make sure to set the securing
force of each claw to the following so that the relay’s characteristics
will be maintained.
When washing the product after soldering, use a water-based or
alcohol-based solvent. Keep the solvent temperature below 40°C.
Do not put the relay in a cold cleaning bath immediately after soldering.
C
A
B
Direction A: 1.96 N max.
Direction B: 4.90 N max.
Direction C: 1.96 N max.
Operating, Storage Environment
If the relay is stored for a long time in an adverse environment with high
temperature, high humidity, organic or sulfide gases, then sulfide or
oxide films will form on the contact surfaces. These films may result in
unstable contact, contact problems or function problems. Therefore,
operate, store or transport the product under specified environmental
conditions.
1. Use in locations where the relay is not exposed to corrosive
gas such as hydrogen sulfide gas or salty air.
2. Use in locations where no visible dust exists.
3. Use, store and transport in locations where the product is not
exposed to direct sunlight, rain or snow.
4. Do not apply force to the product which may result in deformation
or change in quality of the product.
Coating
The relay mounted on the PCB may be coated or washed, but do not
apply silicone coating or detergent containing silicone, otherwise, the
silicone coating or detergent may remain on the surface of the relay.
Latching Relay Mounting
Make sure that excess vibration or shock doesn’t set or reset the
relay during normal operation. The relay is shipped in the ‘reset’
position. Shock or vibration during shipping may require the application
of a reset signal, prior to operation.
6
High Frequency Relay
G6K-RF
Secure the claws to the shaded area. Do not
attach them to the center of the relay or just
one part of the relay.
Maximum Allowable Voltage
The maximum allowable voltage of the coil can be obtained from the
coil temperature increase and the heat-resisting temperature of the
coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maximum
allowable voltage also involves important restrictions which include
the following;
• Must not cause thermal changes in or deterioration of the insulating
material, which may result in films developing on the contacts.
• Must not cause damage to other control devices.
• Must not cause any harmful effect on people.
• Must not cause fire.
Therefore, be sure to use the maximum allowable voltage as specified in
the catalog. As a rule, the rated voltage must be applied to the coil. Consider using a latching relay instead of a non-latching relay with a continuous voltage applied to the coil.
Long-term, Continuous ON contacts
Using the relay where it will remain continuously energized for long
periods of time can lead to unstable contacts. We recommend using
a latching relay for this type of application.
MEMO
High Frequency Relay
G6K-RF
7
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
847-882-2288
Cat. No. K242-E-02
8
06/14 (01/12)
High Frequency Relay
G6K-RF
Specifications subject to change without notice
Printed in USA
Similar pages