ZETTLER AZ7709-1A-24D Spst subminiature power relay Datasheet

AZ7709
SPST SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
4 kV dielectric strength
Proof tracking index (PTI/CTI) 250
5 Amp switching capability (version “T” 10 Amp)
Epoxy sealed version available
UL, CUR file E365652
TÜV file B150188793002
CONTACTS
Arrangement
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power:
(Version “T”:
Max. switched current:
(Version “T”:
Max. switched voltage:
150 W or 1250 VA
300 W or 2500 VA)
5A
10 A)
30 VDC* or 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
Standard coil
5 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
5 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3]
Sensitive coil
3 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
3 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
High capacity version “T” - Standard coil
10 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
10 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3]
High capacity version “T” - Sensitive coil
8 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
8 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
TÜV
Standard coil
5 A at 250 VAC, 100k cycles [1][2]
5 A at 30 VDC, 100k cycles [1][2]
Resistance
Life Expectancy
Mechanical
Minimum operations
1 x 107
Standard version
Electrical
1 x 105 at 5 A 250 VAC Res.
High capacity version “T”
Electrical
1 x 105 at 10 A 250 VAC Res.
Operate Time (max.)
8 ms at nominal coil voltage
Release Time (max.)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
4000 Vrms coil to contact
1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
C250
Overvoltage category: III
Pollution dregree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 5% of nominal coil voltage
Sensitive coil
3 A at 250 VAC, 100k cycles [1][2]
3 A at 30 VDC, 100k cycles [1][2]
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
Vibration
1.65 mm DA at 10–55 Hz
High capacity version “T” - Standard coil
10 A at 250 VAC, 100k cycles [1][2]
10 A at 30 VDC, 100k cycles [1][2]
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
6 grams
High capacity version “T” - Sensitive coil
8 A at 250 VAC, 100k cycles [1][2]
8 A at 30 VDC, 100k cycles [1][2]
Material
GENERAL DATA
Silver cadmium oxide [1], silver tin oxide [2],
silver tin oxide indium oxide [3],
gold plating available
< 100 milliohms initially
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2015-04-09
AZ7709
NOTES
COIL
Power
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
At Pickup Voltage
(typical)
220 mW (standard coil)
113 mW (sensitive coil)
Max. Continuous
Dissipation
760 mW at 20°C (68°F) ambient
Temperature Rise
(at nominal voltage)
41°C (74°F) standard coil
22°C (40°F) sensitive coil
Temperature
Max. 105°C (221°F) Class A
Max. 155°C (311°F) Class F
RELAY ORDERING DATA
STANDARD COIL
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10
Form A (SPST)
3
2.1
3.9
20
AZ7709-1A-3D
5
3.5
6.5
55
AZ7709-1A-5D
6
4.2
7.8
80
AZ7709-1A-6D
9
6.3
11.7
180
AZ7709-1A-9D
12
8.4
15.6
320
AZ7709-1A-12D
18
12.6
23.4
720
AZ7709-1A-18D
24
16.8
31.2
1,280
AZ7709-1A-24D
48
33.6
62.4
5,120
AZ7709-1A-48D
SENSITIVE COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
Must Operate
VDC
ORDER NUMBER*
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (SPST)
3
2.25
3.9
45
AZ7709-1A-3DS
5
3.75
6.5
125
AZ7709-1A-5DS
6
4.50
7.8
180
AZ7709-1A-6DS
9
6.75
11.7
400
AZ7709-1A-9DS
12
9.00
15.6
720
AZ7709-1A-12DS
18
13.50
23.4
1,600
AZ7709-1A-18DS
24
18.00
31.2
2,800
AZ7709-1A-24DS
* “1A” denote silver cadmium contacts.
Substitute “1AE” in place of “1A” for silver tin oxide contacts.
Substitute “1AB” in place of “1A“ for silver tin oxide indium oxide contacts.
Substitute “AZ7709T” in place of “AZ7709” for high capacity version.
Add suffix “E” at the end of order number for sealed version.
Add suffix “G” at the end of order number for gold plated contacts.
Add suffix “F” at the end of order number for Class F version.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2015-04-09
AZ7709
MECHANICAL DATA
PC BOARD LAYOUT
.403 Max
[10.7]
.718 Max
[18.9]
4 x ø .05
[ø 1.3]
.618 Max
[15.7]
.50 ±.004
[12.7 ±.1]
.10 ±.004
[2.54 ±.1]
.30 ±.004
[7.62 ±.1]
.161±.02
[4.1 ±.3]
.018 x .018
[0.45 x 0.45]
2 x .012
[0.3]
.50 ±.008
[12.7 ±.2]
.10 ±.008
[2.54 ±.2]
.039
[1.0]
Viewed toward terminals
WIRING DIAGRAMS
1
3
.30 ±.008
[7.62 ±.2]
2
4
.067
[1.71]
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2015-04-09
Similar pages