Keysight M9048B 18-slot pxie chassi Datasheet

Keysight Technologies
18-slot PXIe Chassis
M9018B PCIe Gen 2, 8 GB/s
M9019A PCIe Gen 3, 24 GB/s
Data Sheet
Introduction
The Keysight Technologies, Inc. M9018B and M9019A PXIe 18-slot chassis deliver the flexibility, compatibility,
and performance required for demanding applications. With 16 PXIe hybrid slots, they give the system
designer more flexibility to mix and match the number and location of PXIe and hybrid-compatible modules.
Choose between the high-performance PCIe® Gen 2 and ultra-high performance, Gen 3 models to meet your
application's requirements. Both models include the same innovative cooling design which allows the chassis
to fit into 4U of rack space. They are also designed for easy integration into large systems containing multiple
PXIe chassis and other non-PXI instrumentation.
Key Features
–– 16 PXIe hybrid slots, 1 PXIe timing slot, and 1 PXIe system slot
–– 4U chassis with innovative cooling design
–– Choose between Gen 3 and Gen 2 PCIe performance levels:
–– Gen 2: M9018B high performance backplane with configurable two- and four-link system slot (2x8 or
4x4) and mix of x4 and x8 hybrid/timing slots
–– Gen 3: M9019A ultra-high performance backplane (maximum 24 GB/s system and 8 GB/s slot-to-slot)
with a two-link (x8, x16) system slot and x8 links to the hybrid/timing slots
–– Multi-chassis power-sequencing and front panel external trigger inputs/outputs
–– Specified up to 55 °C and 10,000 ft operating conditions
03 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Hardware Overview
Backplane configuration
High performance PCIe fabric
The M9018B and M9018B and M9019A PXIe chassis provide
16 hybrid-compatible slots for the ultimate in flexibility and
compatibility. The PCIe switch fabric for the hybrid slots is broken
into two segments, each serviced by its own PCIe-to-PCI bridge
(Figures 2 and 3). The PXIe slots are also organized into three
trigger bus segments with configurable interconnections between
segments. Two front panel trigger ports (SMB) are connected
to the PXI (0:7) trigger bus. This enables easy integration with
non-PXI instruments.
The M9018B PXIe chassis utilizes a high performance, configurable
PCIe switch fabric that operates at Gen 2 speeds. The system slot
can be changed between a 2-link (2x8) or 4-link (4x4) configuration. A 2-link configuration, optimized for the M9021A PCIe cable
interface, is also provided (a 2x8, 2-link configuration, with link
2 inactive). Four of the PXIe peripheral slots have a x8 PCIe link
providing a maximum data bandwidth of 4 GB/s. The 12 remaining
peripheral slots have a x4 PCIe link providing a maximum data
bandwidth of 2 GB/s. The system slot has a maximum data
bandwidth of 8 GB/s when all 16 PCIe lanes are utilized.
Figure 1. M9018B and M9019A 18-slot PXIe Gen 3 chassis
Figure 2. Backplane configuration diagram of the M9018B PXIe 18-slot chassis.
The M9019A PXIe chassis is built around an ultra-high performance PCIe switch fabric that operates at up to Gen 3 speeds.
All of the PXIe peripheral slots have a x8 PCIe link providing a
maximum data bandwidth of 8 GB/s each. The two-link system
slot (x8 + x16) has a maximum data bandwidth of 24 GB/s when all
24 PCIe lanes are utilized. When combined with the M9023A PXIe
system module, M9049A PCIe adapter, and an external PC with
a Gen 3 x16 PCIe slot, up to 16 GB/s of data bandwidth can be
achieved between the PC and PXIe chassis.
04 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Figure 3. Backplane configuration diagram of the M9019A PXIe 18-slot chassis.
05 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Innovative Cooling
Lower maintenance costs
The M9018B and M9019A PXIe chassis utilize an innovative
cooling design that allow them to fit into 4U of rack space.
This represents a 20 percent reduction in occupied rack space,
compared to typical PXI chassis which requires 5U or more for
air-flow. This space can be utilized for an external 1U controller
via PCIe cable, resulting in a system that requires no more rack
space than other chassis with an embedded PC controller.
The M9018B and M9019A PXIe chassis were designed to reduce
maintenance costs. There are no air filters to maintain and the
power supply and fans can be removed while the chassis is
mounted in a rack. This enables the chassis to be serviced, while
keeping DUT cabling and modules in place.
The innovative design includes auto-speed fans to expel hot air
out the back panel allowing other instruments with bottom air
intakes to be placed directly above the chassis. Cool air is pulled
into the chassis from the front, sides, and bottom of the chassis.
Unlike many PXIe chassis, the fan-speed is controlled by using
temperature sensors located on the top of the backplane, in the
path of the module exhaust. This enables the fans in the chassis
to react to actual changes in module temperatures, instead of
ambient air temperature readings used by the typical PXIe chassis. This results in lower module operating temperatures when the
auto fan setting is used.
Keysight’s exclusive air-inlet modules (Figure 4) can also be used
to supply even more cool air from the front of the chassis and
direct it to other slots. Given the air outside the rack is generally
cooler than the air inside the rack, this results in more efficient
cooling of the PXIe modules. This option enables the system
designer to decide how to best cool the chassis, providing more
design flexibility than other PXIe chassis.
With Keysight’s standard warranty, your investment is protected
by Keysight’s global reach in more than 100 countries (either
directly or through distributors). The warranty gives you convenient standard coverage for the country in which the product is
used, eliminating the need to ship equipment back to the country
of purchase. Keysight’s warranty service provides:
–– All parts and labor necessary to return your investment to full
specified performance
–– Recalibration for products supplied originally with a calibration certificate
–– Return shipment
System monitoring
The M9018B and M9019A PXIe chassis have a complete set of
system monitoring functions for power rail voltages, module
exhaust temperatures, and fan speeds. For temperature measurements, the chassis utilizes eight temperature sensors located
on the top of the backplane, in the path of the module exhaust.
Chassis operating conditions can be monitored via a software API
or the soft front panel interface.
A DB-9 connector is also available at the rear of the chassis
for remote inhibit and power rail monitoring. The chassis has
configurable alarms that can be monitored via front panel LEDs,
soft front panel interface, or software API.
Designed for large systems
When connecting multiple PXIe chassis together, the powersequencing becomes very important especially when an embedded controller is used. The M9018B and M9019A PXIe chassis
have special features built-in to make this easy. Cat 5 cables
with RJ-45 connectors are used to interconnect the chassis. In
a multi-chassis configuration, a user can press a single chassis
power button to enable all chassis in the system to power-up. If
an embedded controller is being used, its chassis will automatically be powered up last. This provides a consistent, repeatable
power-up sequence.
Figure 4. Y1214B Air Inlet Kit
Both chassis also have two front panel trigger SMBs which can
be used for input/output triggers. These trigger ports connect to
the PXIe backplane adding configuration flexibility to the system
when non-PXIe instruments are used or when a particular PXIe
instrument being used can only receive triggers over the PXIe
backplane.
06 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Software Platform
Drivers and trigger manager
Soft front panel interface and trigger manager
The M9018B and M9019A PXIe chassis come complete with IVI.
NET, IVI-C, and LabVIEW drivers. Windows 7, 8.1, an 10 operating
systems are supported, and applications can be created using a
variety of software tools including LabVIEW, LabWindows/CVI,
MATLAB, VEE, Visual Basic, VisualStudio.NET (C/C++, C#, VB.NET).
A soft front panel (SFP) interface (Figure 5) and PXIe-9 compliant
trigger bus manager are provided with the chassis. The SFP can be
used to monitor and control the PXIe chassis and has the following
functions:
–– Configure fan control front panel trigger ports
–– Monitor chassis fan speed, chassis temperatures, rail
voltages, and PCIe links
–– Configure alarms for fan speed, temperature, rail voltage,
reference clock
–– Run chassis self-test and update chassis firmware
–– Review chassis information
Figure 5. Soft front panel
07 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Definitions
Specification
Warranted performance. Specifications include guardbands to account for the expected statistical performance distribution, measurement uncertainties,
and changes in performance due to environmental conditions. All specifications and characteristics apply over the operating environment outlined in the
“Environmental and Regulatory” section of this data sheet. In addition, the following conditions must be met:
–– Instrument is within its calibration cycle if calibration is required.
–– Instrument has been stored for a minimum of 1 hour within the operating temperature range prior to turn-on and after a 30 minute warm-up period.
Characteristics
Characteristics describe product performance that is useful in the application of the product, but that is not covered by the product warranty. Characteristics are often referred to as Typical or Nominal values.
Typical
Expected performance of an average unit when operated over a 20 to 30 °C temperature range. Typical performance is not warranted. The instrument
must be within its calibration cycle if calibration is required.
Nominal
Nominal describes representative performance that is useful in the application of the product when operated over a 20 to 30 °C temperature range.
Nominal performance is not warranted.
Additional information
All data are measured from multiple units at room temperature and are representative of product performance within the operating temperature range
unless otherwise noted.
The specifications contained in this document are subject to change.
08 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Technical Specifications
Chassis characteristics
Standards compliance
–– PXI-5 PXI Express hardware specification
–– PXI-1 hardware specification rev 2.2
–– PICMG EXP.0 R2.0 specification
Backplane
Module size
3U
Total slots
18
Hybrid compatible slots
16
PXIe system slot
1 (with three system expansion slots)
PXIe timing slot
1 (also accepts PXIe module)
Module compatibility
PXIe, PXI-Hybrid, PXI-1 (J1 only), and cPCI (J1 only)
System Slot Link Configuration:
M9018B (configurable)
2-Link (2x8) and 4-Link (4x4) plus M9021A configuration (1x8)
M9019A (fixed)
2-Link (x8, x16)
Backplane speed
M9018B
PCIe revision 2.0 (Gen 2)
M9019A
PCIe revision 3.0 (Gen 3)
Mechanical
Size
444.4 mm W x 194.8 mm H x 466 mm D (with feet installed)
444.4 mm W x 177.8 mm H x 466 mm D (with feet removed)
4U x 1 rack width
Weight (without modules)
13.5 kg (29.8 lbs)
Power supply characteristics
AC input
Operating voltage/power (low-line)1
100-120 V, 1200 W (nominal)
Operating voltage/power (high-line)
220-240 V, 1300 W (nominal)
Input frequency range
50/60 Hz
Over current protection
Internal fuse in line
1
Available DC output power (for peripheral module slots)
Total DC power 2
M9018B
M9019A
–– 220-240 V input:
858 W
800 W
–– 100-120 V input:
708 W
650 W
1. Auto switching between high line and low line
2. No derating required for temperature or altitude
09 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Technical Specifications
Power supply characteristics, continued
DC supplies
M9018B
Voltage
M9019A
Maximum current
Maximum current 3
45 ˚C, <10kft 50 ˚C, 10kft
45 ˚C, <10kft 50 ˚C, 10kft
Load
regulation
+3.3 V
70 A
70 A
5%
1.5% (pk-pk)
+5 V
60 A
5%
1% (pk-pk)
+12 V
57.4 A
5%
1% (pk-pk)
-12 V
4A
4A
4A
4A
5%
1% (pk-pk)
5 VAUX
2A
2A
2A
2A
5%
50 mV (pk-pk)
Slot
+3.3 V
+5 V
+12 V
- 12 V
5 VAUX
System controller slot
9A
9A
11 A
0A
1A
System timing/PXIe slot
6A
0A
4A
0A
1A
PXIe hybrid slot
6A
6A
-4 A
1A
1A
1
67 A
2
2
67 A
52.5 A
2
60 A
49 9 A
2
52.5 A
52.5 A
4
4
45 A
4
4
Maximum ripple and noise (20 MHz BW)
Backplane pin current capacity
Chassis cooling and power dissipation characteristics
Slot airflow direction
Chassis cooling intake
Chassis cooling exhaust
Chassis cooling fans
Power dissipation, system slot
Power dissipation, user slot
Power dissipation, timing slot
1.
2.
3.
4.
5.
Bottom of module to top of module
Bottom of front bezel, side panels, and bottom panel of chassis
Rear of chassis
Three 186 cfm fans on rear panel with HIGH/AUTO speed selector
140 W max
42 W max5
42 W max5
The total power supplied for all rails must not exceed 708 W (100-120 V) or 858 W (200-240 V).
The total power supplied for 5 V and 12 V rails must not exceed 689W at 45 °C,<10kft, or 599W at 50 °C, 10kft.
The total power supplied for all rails must not exceed 650W (100-120 V) or 800 W (200-240 V).
The total power supplied for 5 V and 12 V rails must not exceed 630W at 45 °C,<10kft, or 540 W at 50 °C, 10kft.
Maximum per slot power dissipation at 55 °C with 15 °C temperature rise; requires: a) that the chassis. bottom is not blocked (1U rack space
below or sitting on bench with feet extended) OR b) two air inlet modules in slots 9, 10, or 11, and a slot blocker in empty controller slots.
Module cooling can be impacted by each module’s resistance to air flow.
10 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Technical Specifications
Clocks and triggers
10 MHz system clock (PXI_CLK10)
Maximum slot-to-slot skew
155 ps
Accuracy
30 ppm
Output amplitude (10 MHz REF Out BNC)
1 V pk-pk ±20% square-wave into 50 Ω
2 V pk-pk unloaded
Output impedance (10 MHz REF Out BNC)
50 Ω ±5 Ω
100 MHz system clock ( PXIe_CLK100)
Maximum slot-to-slot skew
125 ps
Accuracy
30 ppm
External 10 MHz clock source input requirements
Frequency input
10 MHz ±100 PPM
Input signal (10 MHz REF In BNC)
100 mVPP to 5 VPP (square-wave or sine-wave)
Input signal (PXI timing slot PXI_CLK10_IN)
5 V or 3.3 V TTL signal
PXI star trigger
Maximum slot-to-slot skew
250 ps
PXI differential star triggers
Maximum slot-to-slot skew
150 ps
Maximum differential skew
25 ps
Front panel triggers (trig 1 and trig 2 SMBs)
Direction control
Input or output (configurable)
Output level
3.3 V CMOS (TTL compatible, 5 V tolerant)
Output impedance
50 Ω (typ)
Output trigger source
PXI_Trig0 - PXI_Trig7 (Segment 2)
Input level
3.3 V CMOS (TTL compatible, 5 V tolerant)
Input impedance
3 kΩ (typ)
Input trigger destination
PXI_Trig0 - PXI_Trig7 (Segment 2)
Input threshold
1.65 V (typ)
Minimum swing
250 mV (typ)
Minimum pulse width
100 ns (typ)
Environmental characteristics1, 2
Operating
Storage
Temperature
0˚C to 55˚C
-40˚C to 70˚C
Altitude
Up to 10,000 ft (3048 m)
Up to 15,000 ft (4572 m)
Humidity
Type-tested at 95%, RH (non-condensing)
Vibration
Operating random vibration: type-tested at 5 to 500 Hz, 0.21 g rms
Survival random vibration: type-tested at 5 to 500 Hz, 2.09 g rms
Acoustical emissions (referenced to 1 pW)
Sound pressure level
Sound power
3
Auto fan (25˚C ambient)
High fan
53 dBA
69 dBA
59 dBA
77 dBA
1. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation and end-use. Those stresses include but are not limited to temperature, humidity, shock, vibration, altitude and
power line conditions.
2. Test Methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3
3. At operator position
11 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Technical Specifications
Regulatory charateristics
Safety
Complies with the essential requirements of the European LVD Directive of the following standards (dates and editions are
cited in the Declaration of Conformity):
– IEC/EN 61010-1
– Canada: CSA C22.2 No. 61010-1
– USA: UL std no. 61010-1
Acoustic statement
(European Machinery
Directive)
Acoustic noise emission
LpA < 70 dB
Operator position
Normal operation mode per ISO 7779
EMC
Complies with European EMC Directive of the following standards (dates and editions are cited in the Declaration of
Conformity):
- IEC/EN 61326-1
- CISPR pub 11 group 1, class A
- AS/NZS CISPR 11
- ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada
M9018B/M9019A Rack Mounting
The M9018B and M9019A rack mount accessory kits provide system design flexibility. The following kits can be mix-and-matched to
suit the needs of a given application:
–– Y1215C Flush mount rack kit (Figure 6): Complete kit including rack flanges, handles, and attachment hardware. The kit suspends the chassis in a Keysight rack using only 4U of rack space. Rack rails may be needed in a non-Keysight rack.
–– Y1216B Recess mount rack kit (Figure 7): Complete recess-mount kit including rack flanges, handles, and attachment hardware.
The kit recesses the chassis by 4 inches and suspends the chassis in a Keysight rack using only 4U of rack space. Rack rails may
be needed in a non-Keysight rack.
–– Y1217B Rack mount rail kit (Figure 7): This optional kit provides additional stability to the chassis when rack-mounted. When
using rails, the chassis will require 5U of rack space. Rails may not fit in a non-Keysight rack.
–– Y1218A Cable tray kit (Figure 7): Adds a 1U high cable tray to the chassis and includes cable tray, feet for using the chassis/tray
on a table, and attachment hardware.
Figure 6. M9018B and M9019A chassis suspended in a rack using the
Y1215C.
Figure 7. M9018B and M9019A chassis rack-mounted using the Y1216A,
Y1217A, and Y1218A.
Note: Rack mounting the M9018B and M9019A may require two people if rails are not used. Care must also be taken to ensure the
chassis receives sufficient cooling air. See the chassis cooling characteristics in this data sheet for more details.
12 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Recommended Configuration
Configure the Keysight M9018B and M9019A PXIe chassis as
follows:
–– Select a PXIe system module or embedded controller (the
Keysight M9022A/M9023A and M9037A are recommended)
–– If an external computer is being used, select an appropriate
PC interface card (the Keysight M9048B/M9049A are
recommended)
–– Select an appropriate cable to connect the computer
interface board to the chassis interface (the Y1202A is
recommended to connect the M9048B and M9022A)
–– Select accessories as required
Multi-chassis configuration
The M9018B and M9019A can be used in multi-chassis configurations with other PXIe chassis (including the M9010A PXIe
10-slot chassis) and AXIe Chassis (such M9502A/M9505A). In
general, up to four chassis can be connected together depending
on the controller and operating system used. Many different
topologies are possible including cascade and star. Two examples
are shown below:
For more detailed configuration information, see Interface
Modules and Adapters for PXIe and AXIe Systems, literature
number 5992-0377EN.
Figure 8. Star configuration using the M9049A for x8 connections from a remote PC
to two chassis. Chassis types can be mixed AXIe and PXIe
Figure 9. Cascade configuration using the M9037A with the M9022A for x8 connections from the embedded PC and multiple PXIe chassis (up to a total of four).
13 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Hardware
Software information
Model
Description
M9018B
PXIe chassis: 18-slot, Gen 2, 3U, 8 GB/s
M9019A
PXIe chassis: 18-slot, Gen 3, 3U, 24 GB/s
Both
Include:
Standard PXI filler panels, getting started guide,
drivers, and Keysight I/O libraries
Accessories
Model
Description
Y1212A
Slot blocker kit: 5 single-slot
Y1213A
PXI EMC filler panel kit: 5 single-slot
Y1214B
Air inlet module kit (includes controller slot blocker)
Y1215C
Flush mount rack kit
Y1216B
Recess mount rack kit
Y1217B
Rack mount rail kit
Y1218A
Cable tray kit
Y1270A
Front panel interfacing kit for 18-slot PXIe chassis
Warranty and Calibration
Advantage Services: Calibration and Warranty
Keysight Advantage Services is committed to your success throughout
your equipment’s lifetime.
Warranty 1
R-51B-001-5Z
Warranty Assurance Plan, Return to Keysight, 5 years
R-51B-001-3X
Return to Keysight Express Warranty - 3 years
R-51B-001-5X
Return to Keysight Express Warranty - 5 years
1. Options not available in all countries.
Supported
operating systems
Microsoft Windows 7 SP1 (32/64-bit)
Microsoft Windows 8.1 Update 1 (32/64-bit)
Microsoft Windows 10 (32/64-bit)
Standard compliant drivers
IVI.NET, IVI-C, and LabVIEW
Supported application
development
environments
(ADE)
LabVIEW, LabWindows/CVI, MATLAB, VEE, Visual
Basic, VisualStudio.NET (C/C++, C#, VB.NET)
Keysight IO
Libraries
Supported versions: 17.1 Update 1 (or later). Use of
latest version recommended.
Includes: VISA Libraries, Keysight Connection
Expert, IO Monitor
Related Products
Model
Description
M9037A
PXIe embedded controller: Intel i7, 4 GB RAM,
240 GB SSD
M9048A
PCIe host adapter: single port (x8), Gen 2
M9048B
PCIe host adapter: single port (x8), Gen 3
M9049A
PCIe host adapter: dual port (16), Gen 3
M9021A
PCIe Cable Interface: Gen 2, x8
(supported with M9018B only)
M9022A
PXIe system module: single port (x8), Gen 3
M9023A
PXIe high performance system module: dual port
(x16) Gen 3
M9024A
PXIe high performance system module with
connectivity expansion: two gigabit LAN, two USB
3.0, four USB 2.0, GPIB
14 | Keysight | M9018B and M9019A PXIe Chassis - Data Sheet
Evolving Since 1939
Our unique combination of hardware, software, services, and people can help you
reach your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight.
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
http://www.keysight.com/find/emt_product_registration
Register your products to get up-to-date product information and
find warranty information.
Keysight Services
www.keysight.com/find/service
Keysight Services can help from acquisition to renewal across your
instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh,
consulting, training and more—helps you improve product quality
and lower costs.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure
your instruments are operating to specification, so you can rely on
accurate measurements.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and
product breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-9-7-17)
DEKRA Certified
ISO9001 Quality Management System
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2017
Published in USA, December 1, 2017
5992-1481EN
www.keysight.com
Similar pages