Murata MPA1954G Power supply for led Datasheet

PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
Ordering Guide
Model Name
MPA1954A
MPA1954B
MPA1954C
MPA1954D
MPA1954E
MPA1954F
MPA1954G
MPA1954H
Constant current power supply
Output current(±5%)
Output voltage range
30~50V
270mA
30~50V
350mA
30~50V
440mA
30~50V
500mA
30~45V
530mA
30~45V
560mA
30~55V
300mA
30~40V
600mA
RoHS-Y(B)
Input Characteristics::(Ta=25℃)
Input Voltage Operating Range
Input Frequency
Inrush Current
AC100V(25℃ Cold start)
AC242V(25℃ Cold start)
Model Name Input current(Typ)
Power Factor (Typ)
Output Voltage:50V
Output Voltage:50V
AC90V
AC267V
AC100V
AC242V
MPA1954A
0.19A
0.08A
0.952
0.820
MPA1954B
0.24A
0.09A
0.977
0.894
MPA1954C
0.30A
0.11A
0.982
0.927
0.34A
0.12A
0.989
0.944
MPA1954D
Model Name Input current(Typ)
Power Factor (Typ)
Output Voltage:45V
Output Voltage:45V
AC90V
AC267V
AC100V
AC242V
MPA1954E
0.33A
0.12A
0.984
0.938
0.34A
0.12A
0.988
0.946
MPA1954F
M d lN
Model
Name IInput current(Typ)
(T )
P
Power F
Factor (T
(Typ))
Output Voltage:55V
Output Voltage:55V
AC90V
AC267V
AC100V
AC242V
0.33A
0.12A
0.955
0.863
MPA1954G
Model Name Input current(Typ)
Power Factor (Typ)
Output Voltage:40V
Output Voltage:40V
AC90V
AC267V
AC100V
AC242V
0.33A
0.12A
0.993
0.949
MPA1954H
Output Characteristics(*1)::(Ta=25℃)
Output current(±5%)
Model Name
Average current
Ripple current
(mAp-p typ)
Output current(±5%)
40mA
MPA1954A
270mA
40mA
MPA1954B
350mA
40mA
MPA1954C
440mA
40mA
MPA1954D
Output Characteristics(*1)::(Ta=25℃)
Output current(±5%)
品名
MPA1954E
MPA1954F
Average current
Ripple current
(mAp-p typ)
500mA
560mA
40mA
40mA
Min
90
47
Typ
100/242
50/60
Input Power(Typ)
Output Voltage:50V
AC100V
AC242V
16.1W
16.4W
21.0W
21.0W
26.4W
26.2W
30.0W
29.5W
Input Power(Typ)
Output Voltage:45V
AC100V
AC242V
28.7W
28.4W
30.4W
29.9W
IInput P
Power(Typ)
(T )
Output Voltage:55V
AC100V
AC242V
19.9W
20.2W
Input Power(Typ)
Output Voltage:40V
AC100V
AC242V
29.6W
29.1W
Max
Units
267
Vac
63
Hz
10
A
20
A
Input rated capacity
Output Voltage:50V
17VA
21VA
27VA
30VA
Input rated capacity
Output Voltage:45V
30VA
30VA
IInput rated
d capacity
i
Output Voltage:55V
21VA
Input rated capacity
Output Voltage:40V
30VA
Efficiency(Typ)
Output voltage:50V
tput voltage:30V
AC100V
AC242V AC100V
AC242V
78%
72%
82%
80%
79%
77%
83%
82%
80%
78%
83%
84%
80%
79%
83%
84%
Efficiency(Typ)
Output voltage:45V
tput voltage:30V
AC100V
AC242V AC100V
AC242V
80%
79%
83%
83%
80%
79%
83%
84%
Product specification
MPA1954 Series
1/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
Output Characteristics(*1)::(Ta=25℃)
Output current(±5%)
品名
Average current
Ripple current
(mAp-p typ)
300mA
40mA
MPA1954G
Output Characteristics(*1)::(Ta=25℃)
Output current(±5%)
品名
Efficiency(Typ)
Output voltage:55V
tput voltage:30V
AC100V
AC242V AC100V
AC242V
78%
72%
82%
81%
Efficiency(Typ)
Output voltage:40V
tput voltage:30V
Average current
AC100V
AC242V AC100V
AC242V
80%
80%
81%
82%
600mA
40mA
(*1)Output characteristics are measured by LE-5150-2(KEISOKUGIKEN) as a LED-load .
Ripple current
(mAp-p typ)
MPA1954H
Environmental Characteristics:
Condition
Min
Max
Typ
50
Operating Temp. Range
-10 (*)
Non-condensing
5
95
Operating Humidity
-20
55
Storage Temp. Range
Natural air cooling
Cooling condition
EIAJ RCR-9102A
10
MTBF
Ta=50℃, AC100V/242V
50000
Estimated life
320
Weight
Vibration frequency:10~55Hz、Vibration acceleration:2G
Sinusoidal Vibration
10G
Shock
compliant
RoHS
1 Year
Warranty
China
Manufacturing Country
(*)Start-up at -20℃
Safety:
Electrical Appliance Safety Low (1st clause)
Safety standards
EN61347-1, EN61347-2-13(CB REPORT)
JIS C61000-3-2 Class C、IEC61000-3-2 Class C
Harmonics
Electrical Appliance Safety Low (1st clause)
Conducted emission
CISPR15,22
CISPR
Class B
VCCI
30MΩ or more (Primary-Secondary)
Insulation resistance
AC4000V (60Hz Primary-Secondary)、Leak current:10mA or less
Withstand voltage
Leakage current
Units
℃
%
℃
year
hour
g
1mArms or less (AC242V 60Hz normal temperature/normal humidity)
Protection Characteristics:
Over Current Protection
Over Voltage Protection
Output Open Protection
Immunity:
Electrostatic discharge
Electrical fast transient burst
Surge
Operating
-
62V or more
-
Conditions
Shut down
Shut down
Shut down
IEC61000-4-2
IEC61000-4-4
IEC61000-4-5
Product specification
MPA1954 Series
Return method
AC re-injection
AC re-injection
AC re-injection
Level 3
Level 3
Level 3
2/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
Mechanical Dimensions・Label
Unit : mm
Tolerance of outline
Range of dimension
0.5 < L ≦ 6
6 < L ≦ 10
10 < L ≦ 30
30 < L ≦ 180
180 < L ≦ 500
500 < L ≦ 1000
L:Dimension
LABEL1
Tolerance
± 0.3
± 0.4
± 0.7
± 1.0
± 1.5
± 2
2.0
0
(Ex.MPA1954F)
Product specification
MPA1954 Series
3/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
Input/Output Terminal
AC Input connector
Maker Type Name
Connector No.
CN1
235-503/342-325
(WAGO)
Terminal No.
1
2
3
Description
AC Neutral
AC LIVE
FG
Terminal No.
1
2
Description
LED Output + (Anode)
LED Output- (Cathode)
Output Connector
Connector No.
CN101
Maker Type Name
235-102/330-000 (WAGO)
Instruction for Connecting Conductor
■ Structure : Part name and structure of terminal block.
Product specification
MPA1954 Series
4/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
■ Stripping of Wire
Please strip a conductor's stripped length related as drawings.
Please fix splayed, bent or twisted wire.
■ Connecting Please follow the instructions
① Insert a wire to the
wire hole.
② A wire must be
inserted to a stop
p
position.
③ Pull a wire slightly
to check if connectingg
has been done
completely.
■ Removal Please follow the instructions
① Put a screwdriver to
the operating slot.
② Hold down a
screwdriver, a
conductor can be
releaase
Product specification
MPA1954 Series
③ Put off a
screwdriver.
5/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
【Instruction Manual】
Before using the Power Supply Unit
Pay attention to all warnings and cautions before using the PSU.
Incorrect usage could lead to an electrical shock, damage to the PSU or a fire hazard.
★Warning & Caution
・Do not modify and remove the cover.
・If any failure or trouble occurs because of utilizing the power supply unit without reflecting the
described contents on this specification, Murata cannot assure such trouble.
・Do not touch the internal components, they may have high voltage or high temperature.
You may get electrical shock or burned.
・Definitely avoid to use the power supply unit by the excessive input voltage, output voltage,
output current and ambient temperature as defined on this specification.
The excessive current, voltage and temperature will cause the deterioration of the components
or abnormal heat, both of which may affect not only to shorten the unit's life-long but also to
damage and break the unit.
・Use the PSU after confirm the correct connection of input and output.
・Be sure not to scratch and damage the input leads. Never transfer the unit by holding
and pulling any lead wire.
・If PSU is dropped, absolutely not to use it any more.
・Make sure not to install and/or store the unit under the environment as stated below because
such will cause the insulation deterioration.
① Make
M k sure to
t avoid
id storing
t i the
th unitit under
d the
th condition
diti off high
hi h temperature,
t
t
high
hi h
humidity or direct sunlight which are out of the standard on this specification.
② Ambient air containing the corrosive gas. (Cl2, H2S, NH3, SO2, NOX, etc.)
③ Places which have the fear to be splashed with water, oil, organic solvent, etc.
④ Places with a high concentration of dusty places.
⑤ Other environment correspondingly mentioned above.
・Make sure not to install and/or store the unit under the environment as stated below
because such will cause the insulation deterioration.
① If any alien substance attached on terminals, it may cause the contact failure or
insertion deterioration.
② The use of the silicon rubber or silicon bond which contain a high percentage of
dimethylpolysiloxane may cause to trigger the contact failure of volume,
potentiometer volume or switch. Make sure to use such rubber or bond with the
percentage of dimethylpolysiloxane 0.1% or less.
・PSU can not be used under the condition of the series operation.
・Rust may occur in the chassis because of use environment.
・This specification regulates the quality of the power unit, if nothing specially defined. When
using the power supply unit, make sure to evaluate and confirm the quality upon mounting
the power supply unit to your product.
Product specification
MPA1954 Series
6/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
【Mounting】
Mounting method
・Please use the place at 50℃ or less around the PSU ambient.
・Please connect the thick and short wire to the FG terminal for safety and EMI.
・Please separate Input wire and Output wire surely.
・Please refer as follows about the Wire for input and output.
AC-intput wire:φ0.8-1.6mm,0.5-2.5m㎡ single wire (Strip length 9-10mm)
LED Output wire:φ0.8-1.2mm,0.5-1.5m㎡ single wire (Strip length 9-10mm)
・Please fix a screw about the installation of the power supply.
(more than two places in total)
(Screw hole:φ3.5×4、Φ4.5×2)
【Parallel Operation】
・Series Operation is not possible.
・For parallel operation,
operation either method (1) or (2) is possible.
possible But please caution as follows.
follows
Parallel 1:In a case of operating the plural LEDs for one power supply.
If LED Vf voltage are different, the current may be partial.
Please add a balance circuit not to become so.
+
PSU
Output
Terminal -
LED Load
LED Load
Parallel 2:In a case of operating twe Power supplies for one LED.
The total current of two power supplies pass through in the LED.
And please confirm the leakage current as the system.
+
PSU
Output
Terminal -
LED Load
PSU
+
Output
Terminal
-
Product specification
MPA1954 Series
7/8
PRODUCT SPECIFICATION
MPA1954 Series
Power Supply for LED
PACKING SPECIFICATION
Use for the Model MPA1954 series.
PARTS NAME
NO.
Q'TY
PACKING BOX
1/30
2
BASE PAD
2/30
3
PARTITION BOARD
1/30
4
Small PE Bag
30/30
1
PACKING PROCESS :
Note: 1. It contains 30 pieces of product in every box.
(2)
(4)
(3)
(2)
(1)
320mm
400mm
320mm
Figture.1
A0024
Product specification
MPA1954 Series
8/8
Similar pages