Lumileds LXMA-PH01-0050 Automotive specification Datasheet

LUXEON Rebel
Automotive Specification
Optimized solutions for
automotive applications
Technical Datasheet DS58
LUXEON® Rebel
Automotive Specification
Introduction
Automotive Specification LUXEON® Rebel LEDs are specifically designed and tested
to meet and exceed expectations for reliability, performance and lifetime in all vehicle
applications. Philips Lumileds automotive color binning structure meets both SAE and
ECE color specifications and provides finer granularity than existing systems. PPAP
documentation is available upon request. Automotive Specification LUXEON Rebel
LEDs are superior LED products for:
• Daytime Running Lights (DRL)
• Turn Lamps
• Stop/Tail Lamps
• Position Lamps
• Backup Lamps
• Side Marker Lamps
• Rear Fog Lamps
• Interior Lamps.
Hg
Table of Contents
Product Nomenclature................................................................................................................................................. 3
Average Lumen Maintenance Characteristics......................................................................................................... 3
Environmental Compliance.......................................................................................................................................... 3
Flux Characteristics....................................................................................................................................................... 4
Optical Characteristics................................................................................................................................................. 5
Electrical Characteristics.............................................................................................................................................. 6
Absolute Maximum Ratings.................................................................................................................................... 8
Absolute Minimum Ratings..................................................................................................................................... 8
JEDEC Moisture Sensitivity.................................................................................................................................... 9
Reflow Soldering Characteristics............................................................................................................................. 10
Mechanical Dimensions.............................................................................................................................................. 11
Pad Configuration ................................................................................................................................................. 12
Solder Pad Design................................................................................................................................................... 12
Wavelength Characteristics....................................................................................................................................... 13
Typical Light Output Characteristics over Temperature..................................................................................... 15
Typical Forward Current Characteristics............................................................................................................... 17
Typical Relative Luminous Flux................................................................................................................................. 19
Current Derating Curves........................................................................................................................................... 21
Typical Radiation Patterns.......................................................................................................................................... 25
Emitter Pocket Tape Packaging.................................................................................................................................. 28
Emitter Reel Packaging............................................................................................................................................... 29
Automotive Product Binning and Labeling............................................................................................................. 30
LUXEON Rebel PC Amber Color Bin Structure................................................................................................. 35
Forward Voltage Bins.............................................................................................................................................. 37
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
2
Product Nomenclature
LUXEON Rebel is tested and binned at 350 mA.
The part number designation is explained as follows:
L X MA - A B C D - E F G H
Where:
A — designates radiation pattern (value P for Lambertian)
B — designates color variant (W for Automotive White, L for Amber and PC Amber, H for Red-Orange)
C — designates color variant (0 for Automotive White, Amber, PC Amber, and Red-Orange)
D — designates technology (1 for Automotive White, Amber, Red-Orange standard flux direct color; 2 for PC Amber Phosphor-Converted and
Red-Orange high flux direct color)
E — reserved for future product offerings
FGH — minimum luminous flux (lm) performance
Products tested and binned at 350 mA follow the part numbering scheme:
L X MA - P x 0 x - x x x x
Average Lumen Maintenance Characteristics
Lifetime for solid-state lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial light output remaining
after a specified period of time.
Philips Lumileds projects that LUXEON Rebel Automotive White products will deliver, on average, 70% lumen maintenance at 50,000 hours
of operation at a forward current of 350 mA at 100% duty cycle. This projection is based on constant current operation with junction temperature
maintained at or below 135°C.
Philips Lumileds projects that red-orange and amber LUXEON Rebel products will deliver, on average, 70% lumen maintenance at 30,000 hours
of operation at a forward current of 350 mA at 100% duty cycle. This projection is based on constant current operation with junction temperature
maintained at or below 125°C.
Philips Lumileds projects that PC Amber LUXEON Rebel products will deliver, on average, 70% lumen maintenance at 5,600 hours of operation at a
forward current of 350 mA at 100% duty cycle. This projection is based on constant current operation with junction temperature maintained at or
below 135°C.
This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal
LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. The LUXEON Rebel is compliant to
the European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH, ELV, and RoHS directives.
Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
3
Flux Characteristics
Flux Characteristics for LUXEON Rebel
Junction Temperature, TJ = 25°C [4]
Table 1.
Performance at Test Current
Minimum Luminous
Flux (lm)
Color
Part Number [5]
FV [1] [3]
Test
Current
(mA)
Typical Performance
at Indicated Current
Typical Luminous
Drive
Flux (lm)
Current
FV [2] [3]
(mA)
LXMA-PW01-0100
Automotive White
LXMA-PW01-0110
100
110
350
350
180
195
700
700
Red-Orange
LXMA-PH01-0040
LXMA-PH01-0050
LXMA-PH02-0060
LXMA-PH02-0070
40
50
60
70
350
350
350
350
75
85
122
134
700
700
700
700
Amber
LXMA-PL01-0023
LXMA-PL01-0030
LXMA-PL01-0040
23.5
30
40
350
350
350
45
60
70
700
700
700
LXMA-PL02-0080
LXMA-PL02-0090
LXMA-PL02-0100
80
90
100
350
350
350
145
165
180
700
700
700
PC Amber
Notes for Table 1:
1. Minimum luminous flux performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on
flux measurements.
2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions.
3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult
Philips Lumileds for more information.
4. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C.
5. Please contact Phiips Lumileds for information on custom part numbers.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
4
Optical Characteristics
Lambertian LUXEON Rebel at Test Current [1]
Junction Temperature, TJ = 25°C [10]
Table 2.
Typical
[2],[3]
Color Temperature
Spectral
CCT
Half-width [5]
(nm)
Color
Min.
Typ.
Max.
Dl1/2
Typical
Temperature
Coefficient of
Dominant
Wavelength
(nm/°C)
DlD/ DTJ
Typical
Total
Included
Angle [6]
(degrees)
u0.90V
Typical
Viewing
Angle [7]
(degrees)
2u 1/2
Automotive White [8]
3800 K
5500 K
6300 K
—
—
160
120
[9]
Red-Orange
610.0 nm
617.0 nm
620.0 nm
20
0.08
160
125
Amber [9]
587.0 nm
590.0 nm
592.0 nm
14
0.10
160
125
PC Amber [8]
588.0 nm
591.0 nm
592.0 nm
80
0.10
160
120
Notes for Table 2:
1. LUXEON Rebel is tested and binned at 350 mA.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a
tolerance of ± 0.5 nm for dominant wavelength measurements.
3. CCT ±5% tester tolerance.
4. CRI (Color Rendering Index) for white product types is 70 typical.
5. Spectral width at ½ of the peak intensity.
6. Total angle at which 90% of total luminous flux is captured.
7. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
8. All white and PC Amber products are built with Indium Gallium Nitride (InGaN).
9. All red-orange and amber products are built with Aluminum Indium Gallium Phosphide (AlInGaP).
10. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
5
Electrical Characteristics
Electrical Characteristics at 350 mA for LUXEON Rebel,
Junction Temperature, Tj = 25ºC
Table 3.
Typical
Dynamic
Forward Voltage Vf [1]
Resistance [4]
(V)
(Ω)
Color
Min.
Typ.
Max.
RD
Typical
Temperature
Coefficient of
Forward Voltage [2]
(mV/°C)
DVF / DTJ
Typical
Thermal
Resistance
Junction to
Thermal Pad (°C/W) [3]
Ru J-C
LXMA-PW01-0100
2.55
2.92
3.27
.03
-2.0 to -4.0
10
LXMA-PW01-0110
2.55
2.92
3.27
.03
-2.0 to -4.0
10
LXMA-PH01-0040
2.31
2.9
3.51
1.5
-2.0 to -4.0
12
LXMA-PH01-0050
2.31
2.9
3.51
1.5
-2.0 to -4.0
12
LXMA-PH02-0060
1.80
2.10
2.80
0.57
-2.0 to -4.0
8
LXMA-PH02-0070
1.80
2.10
2.80
0.57
-2.0 to -4.0
8
LXMA-PL01-0023
2.31
2.9
3.51
1.3
-2.0 to -4.0
12
LXMA-PL01-0030
2.31
2.9
3.51
1.3
-2.0 to -4.0
12
LXMA-PL01-0040
2.31
2.9
3.51
1.3
-2.0 to -4.0
12
LXMA-PL02-0080
2.55
2.92
3.27
0.36
-2.0 to -4.0
10
LXMA-PL02-0090
2.55
2.92
3.27
0.36
-2.0 to -4.0
10
LXMA-PL02-0100
2.55
2.92
3.27
0.36
-2.0 to -4.0
10
Notes for Table 3:
1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C = TJ = 110°C at If = 350 mA.
3. Does not include wall plug efficiency.
4. Dynamic resistance is the inverse of the slop in the linear forward voltage model for LEDs. See Forward Voltage vs. Forward Current curves.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
6
Electrical Characteristics
Typical Electrical Characteristics at 700 mA for LUXEON Rebel,
Junction Temperature, Tj = 25ºC
Table 4.
Color
Typical Forward Voltage Vf
(V)
LXMA-PW01-0100
LXMA-PW01-0110
LXMA-PH01-0040
LXMA-PH01-0050
LXMA-PH02-0060
LXMA-PH02-0070
LXMA-PL01-0023
LXMA-PL01-0030
LXMA-PL01-0040
LXMA-PL02-0080
LXMA-PL02-0090
LXMA-PL02-0100
Note for Table 4:
1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
[1]
3.06
3.06
3.60
3.60
2.30
2.30
3.60
3.60
3.60
3.06
3.06
3.06
7
Absolute Maximum Ratings
Table 5a.
Parameter
Automotive White
Red-Orange / Amber
PC Amber
DC Forward Current (mA)
Peak Pulsed Forward Current (mA)
Average Forward Current (mA)
ESD Sensitivity [5]
LED Junction Temperature [1] [3] [4]
Operating Case Temperature [4]
Storage Temperature
700
1000
700
8kV HBM, 400V MM
150°C
-40°C - 150°C
-40°C - 135°C
700
700
700
8kV HBM, 400V MM
135°C
-40°C - 135°C
-40°C - 135°C
700
700
700
8kV HBM, 400V MM
135°C
-40°C - 135°C
-40°C - 135°C
Soldering Temperature
JEDEC 020c 260°C
JEDEC 020c 260°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
3
3
Autoclave Conditions
121°C at 2 ATM
100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (Vr)
See Note 2
See Note 2
See Note 2
Notes for Table 5:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. LUXEON Rebel LEDs are not designed to be driven in reverse bias.
3. LUXEON Rebel Automotive LEDs driven at maximum LED junction temperature will have limited lifetime.
4. Please consult with Philips Lumileds for more information on maximum time durations and forward currents for these temperature ranges.
5. Measured using human body model and machine model (per AEC-Q101C).
Absolute Minimum Ratings
Table 5b.
Parameter
Automotive White
Red-Orange / Amber
PC Amber
DC Forward Current (mA)
50
50
50
JEDEC Moisture Sensitivity
Table 6.
Soak Requirements
Level Floor Life
Standard
Time
ConditionsTime Conditions
1
unlimited [ 30°C /
85% RH
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
168h
+ 5 / -0
85°C / 85%
RH
8
Reflow Soldering Characteristics
JEDEC 020c
Temperature Profile for Table 7.
Table 7.
Profile Feature
Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp)
3°C / second max
Preheat Temperature Min (Tsmin)
150°C
Preheat Temperature Max (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 - 180 seconds
Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 - 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (tP)
20 - 40 seconds
Ramp - Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Note for Table 7:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
9
Mechanical Dimensions
Figure 1. Package outline drawing.
Notes for Figure 1:
1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by
excessive force to the lens.
2. Drawings not to scale.
3. All dimensions are in millimeters.
4. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
10
Pad Configuration
Figure 2. Pad configuration.
Note for Figure 2:
1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Solder Pad Design
Figure 3. Solder pad layout.
Note for Figure 3:
The photograph shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance
of 7 K/W.
Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
11
Wavelength Characteristics
Red-Orange and Amber AlInGap
at Test Current Thermal Pad Temperature = 25°C
Relative Spectral Power
Distribution
1.0
Amber
0.8
Red-Orange
0.6
0.4
0.2
0.0
400
500
450
550
600
650
700
Wavelength (nm)
Figure 4. Relative intensity vs. wavelength.
Automotive White, Thermal Pad Temperature = 25°C
1.2
Re
elative Spe
ectral Pow
wer Distrib
bution
1
0.8
0.6
0.4
0.2
0
300
400
500
600
700
800
900
Wavelength (nm)
Figure 5. White color spectrum of typical CCT part, integrated measurement.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
12
PC Amber, Thermal Pad Temperature = 25°C
1.2
Re
elative Spe
ectral Pow
wer Distrib
bution
1
0.8
0.6
0.4
0.2
0
300
400
500
600
700
800
900
Wavelength (nm)
Figure 6. Relative intensity vs. wavelength.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
13
Typical Light Output Characteristics over Temperature
Automotive White at 350 mA and 700 mA Currents
2.0
1.8
Relattive Lumin
nous Flux
x
1.6
1.4
1.2
1.0
0.8
350mA
0.6
0.4
700mA
0.2
00
0.0
-50
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
Thermal Pad Temperature (oC)
Figure 7. Relative light output vs. thermal pad temperature for Automotive White
(Monopulse Measurement, H/C factor is color bin dependent; 5000K to 6300K shown).
PC Amber at 350 mA and 700 mA Currents
2
Relative Lum
minous Flu
ux
1.75
1.5
1 25
1.25
1
350 mA
0.75
700 mA
0.5
-50
-40
-30
-20
-10
0
10
20
30
40
50
Thermal Pad Temperature
60
70
80
90
100
110
(oC)
Figure 8. Relative light output vs. thermal pad temperature for PC Amber (Monopulse Measurement).
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
14
Red-Orange and Amber AlInGap at 350 mA Current
1.75
Red-orange (LXMA-PH01 & LXMA-PH02)
Relativ
ve Luminous Flux Output
1.50
Amber
1.25
1.00
0.75
0.50
0.25
0.00
-20
0
20
40
60
80
100
Thermal Pad Temperature (°C)
Figure 9. Relative light output vs. thermal pad temperature for Red-Orange and Amber AlInGaP
at Test Current (Monopulse Measurement).
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
15
Typical Forward Current Characteristics
Automotive White, Thermal Pad Temperature = 25°C and 85°C
800.00
25C
700.00
85C
Poly.25C
(25C)
Forwa
ard Curren
nt (mA)
600.00
Poly.85C
(85C)
500.00
400.00
300 00
300.00
200.00
100.00
0.00
2.6
2.65
2.7
2.75
2.8
2.85
2.9
2.95
3
3.05
3.1
Forward Voltage (V)
Figure 10. Forward current vs. forward voltage for Automotive White (Monopulse Measurement)
at various thermal pad temperatures. [extend to 50 mA]
PC Amber, Thermal Pad Temperature = 25°C and 85°C
800
700
Forw
ward Curre
ent (mA)
600
500
400
300
25C
200
25C(25C)
Expon.
100
0
85C(85C)
Expon.
2.6
2.7
2.8
2.9
3
3.1
3.2
Forward Voltage (V)
Figure 11. Forward current vs. forward voltage ffor PC Amber (Monopulse Measurement)
at various thermal pad temperatures. [extend to 50 mA]
Notes for Figures 10 & 11:
Driving these high power devices at currents less than the test conditions (350 mA and 700 mA) may produce unpredictable results and may
be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
16
Red-Orange and Amber AlInGaP, Thermal Pad Temperature = 25°C
Forrward Current (mA)
1000
900
Red-Orange (LXMA-PH02)
800
Red-Orange (LXMA-PH01) &
Amber (LXMA-PL01)
700
600
500
400
300
200
100
0
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
Forward Voltage (V)
Figure 12. Forward current vs. forward voltage for Red-Orange
and Amber AlLnGaP (Monopulse Measurement) at 25°C thermal pad temperature.
Note for Figure 12:
Driving these high power devices at currents less than the test conditions (350 mA and 700 mA) may produce unpredictable results and may
be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
17
Typical Relative Luminous Flux
Relative Luminous Flux vs. Forward Current for Automotive White,
Thermal Pad Temperature = 25°C and 85°C
2.0
1.8
Relattive Lumin
nous Flux
1.6
14
1.4
1.2
1.0
0.8
25C
0.6
85C
Poly.
(25C)
25C
0.4
Poly.
(85C)
85C
0.2
0.0
0
100
200
300
400
500
600
700
800
Forward Current (mA)
Figure 13. Relative luminous flux vs. forward current for Automotive White (Monopulse).
Typical Relative Luminous Flux vs. Forward Current for
PC Amber, Thermal Pad Temperature = 25°C and 85°C
2
Realttive Lumin
nous Flux
1.75
15
1.5
1.25
1
0.75
25C
0.5
85C
Power
(25C)
25C
0.25
Power
(85C)
85C
0
50
150
250
350
450
550
650
750
Current (mA)
Figure 14. Relative luminous flux vs. forward current for PC Amber (Monopulse).
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
18
Relative Luminous Flux vs. Forward Current for Red-Orange and
Amber AlInGaP, Thermal Pad Temperature = 25°C
Relative Lum
minous Flux/Radiometric Power
2.00
1.75
1.50
1.25
1.00
0.75
Red-Orange (LXMA-PH02)
0.50
Red-Orange (LXMA-PH01) &
Amber (LXMA-PL01)
0.25
0.00
0
100
200
300
400
500
600
700
800
Forward Current (mA)
Figure 15. Relative luminous flux vs. forward current for Red-Orange and Amber (Monopulse).
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
19
Current Derating Curves
Current Derating Curve for 350 mA Drive Current
Automotive White
650
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
5
25
550
35
45
Current (m
mA)
450
350
250
150
50
0
25
50
75
100
125
150
175
TA - Ambient Temperature (oC)
Figure 16. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC for Automotive White.
Current Derating Curve for 350 mA Drive Current
PC Amber
650
5
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
550
25
35
Current (mA
A)
450
45
350
250
150
50
0
25
50
75
100
125
150
175
TA - Ambient Temperature (oC)
Figure 17. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for PC Amber.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
20
Current Derating Curve for 350 mA Drive Current
Red-Orange and Amber AlInGap
650
5
550
25
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
35
45
Current (mA)
450
350
250
150
50
0
25
50
75
100
125
TA - Ambient Temperature
150
175
(oC)
Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for LXMA-PH01 for Red-Orange and Amber.
Current Derating Curve for 350 mA Drive Current
Red-Orange AlInGaP
650
5
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
25
550
35
45
Current (mA
A)
450
350
250
150
50
0
25
50
75
100
125
150
175
TA - Ambient Temperature (oC)
Figure 19. Maximum Forward Current vs. Ambient Temperature, Based on TJMAX = 135ºC for Red-Orange LXMA-PH02.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
21
Current Derating Curve for 700 mA Drive Current
Automotive White
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
1050
5
25
35
Current (mA)
C
850
45
650
450
250
50
0
25
50
75
100
TA - Ambient Temperature
125
150
175
(oC)
Figure 20. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC for Automotive White.
Current Derating Curve for 700 mA Drive Current
PC Amber
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
1050
5
25
35
45
Current ((mA)
850
650
450
250
50
0
25
50
75
100
125
150
175
TA - Ambient Temperature (oC)
Figure 21. Maximum Forward Current vs. Ambient Temperature, Based on TJMAX = 135ºC for PC Amber.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
22
Current Derating Curve for 700 mA Drive Current
Red-Orange and Amber AlInGaP
1050
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
950
5
25
35
850
45
Current (mA)
750
650
550
450
350
250
150
50
0
25
50
75
100
125
150
175
TA - Ambient Temperature (oC)
Figure 22. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for Red-Orange LXMA-PH01 and Amber AlInGaP.
Current Derating Curve for 700 mA Drive Current
Red-Orange AlInGaP
1050
Case to Heat Sink Thermal Resistance
(does not include LED thermal resistance) - K/W:
950
5
25
35
850
45
Current (mA)
750
650
550
450
350
250
150
50
0
25
50
75
100
TA - Ambient Temperature
125
150
175
(oC)
Figure 23. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for Red-Orange LXMA-PH02 AlInGaP.
Notes for Figures 18-23:
Current derating curves represent constant current operation condition.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
23
Typical Radiation Patterns
Typical Representative Spatial Radiation Pattern
for Automotive White Lambertian
100%
90%
Relative Intensity (%)
80%
70%
60%
50%
40%
30%
20%
10%
0%
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement (Degrees)
Figure 24: Typical representative spatial radiation pattern for Automotive White lambertian.
Typical Polar Radiation Pattern for Automotive White Lambertian
0°
-30°
30°
60°
-60°
60°
-1.0
-0.8
-0.6
-0.4
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
Figure 25: Typical polar radiation pattern for Automotive White lambertian.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
24
Typical Representative Spatial Radiation Pattern
for PC Amber Lambertian
1.2
Relative In
R
ntensity
1
0.8
0.6
0.4
0.2
-100
-80
-60
-40
-20
0
0
20
40
60
80
100
Angular Displacement deg
Figure 26: Typical representative spatial radiation pattern for PC Amber lambertian.
Typical Polar Radiation Pattern for PC Amber Lambertian
0°
30°
-30°
60°
-60°
-1.0
-0.8
-0.6
-0.4
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
Figure 27: Typical polar radiation pattern for PC Amber lambertian.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
25
Typical Representative Spatial Radiation Pattern
for Red-Orange and Amber AlInGaP Lambertian
100%
90%
80%
Relative
R
Intensity %
70%
60%
50%
40%
30%
Red-Orange LXMA-PH02
20%
Red-Orange LXMA-PH01 & Amber
LXMA-PL01
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement deg
Figure 28: Typical representative spatial radiation pattern for Red-Orange lambertian (LMXA-PH01) and Amber AlInGaP.
Typical Polar Radiation Pattern
for Red-Orange and Amber AlInGaP Lambertian
0°
-30°
30°
60°
-60°
-1.0
-0.8
-0.6
-0.4
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
Red-Orange (LXMA-PH02)
Red-Orange LMXA-PH01 &
Amber LXMA-PL01
Figure 29: Typical polar radiation pattern for for Red-Orange lambertian (LMXA-PH01) and Amber.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
26
Emitter Pocket Tape Packaging
20
1000
50
Figure 30. Emitter pocket tape packaging.
Note: SPI may vary from 1000. Please contact Philips Lumileds for more information.
21
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
27
Emitter Reel Packaging
Figure 31. Emitter reel packaging.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
28
Automotive Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For
this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (VF).
Decoding Product Bin Labeling
LUXEON Rebel Emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on
a singe reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes it is possible to determine optimum
mixing and matching of products for consistency in a given application.
Format of Labeling for Emitters
Reels of Red-Orange and Amber Emitters are labeled with a three digit alphanumeric CAT code following the format below.
ABC
A = Flux bin (P, Q, R, S, etc.)
B = Color bin (2, 4, etc.)
C = VF bin (E, F, G, etc.)
Reels of Automotive White Emitters are labeled with a four digit alphanumeric CAT code following the format below.
ABCD
A = Flux bin (P, Q, R, S, etc.)
B and C = Color bin (WN, W0, WP, WQ,VN,V0 etc.)
D = VF bin (E, F, G, etc.)
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
29
Luminous Flux Bins
Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters.
Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are
available in all colors.
Table 8.
Flux Bins - All Colors (except Royal-Blue)
Minimum Photometric Flux
Maximum Photometric Flux
Bin Code
(lm)
(lm)
E
23.5
30
F
30
40
G
40
50
H
50
60
J
60
70
K
70
80
L
80
90
M
90
100
N
100
110
X
110
120
P
120
130
Y
130
140
Q
140
160
Note for Table 8:
1. Photometric luminous flux bin structure for LUXEON Rebel emitters.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
30
LUXEON Rebel Automotive White Color Bin Structure
Automotive White LUXEON Rebel Emitters for Automotive applications are tested and binned by x,y coordinates.
Table 9.
Bin Code
x
y
A1
0.314792
0.328823
0.329220
0.317466
Typical CCT
(K)
Bin Code
x
y
0.344438
6000
A7
0.356917
0.331331
0.320438
0.314792
0.344438
A2
0.317466
0.320438
6000
A9
0.329220
0.331331
0.329544
0.310495
0.319597
0.301201
0.317466
0.320438
A3
0.328823
0.356917
5300
0.346904
0.371742
0.344443
0.344232
0.329220
0.331331
0.328823
0.356917
Note for Table 9:
1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
Typical CCT
(K)
0.364212
0.381106
0.374075
0.359401
0.382878
4300
0.393747
0.365822
0.355699
0.364212
0.381106
0.396279
0.387071
0.374075
0.381106
0.382878
0.393747
0.403508
0.373899
0.365822
0.393747
3950
31
Graphical Presentation of LUXEON Rebel Automotive White
xy Coordinates
0.43
3800K
0.41
4100K
4500K
0.39
SN
S0
A7
0.37
5560K
6300K
0.35
VN
blackbody locus
A9
TN
5000K
T0
A3
V0
WN
SAE Specification
y
A1
W0
0.33
WP
0.31
A2
WQ
0.29
0.27
0.25
0.29
0.31
0.33
0.35
x
0.37
0.39
0.41
0.43
Figure 32. LUXEON Rebel White Automotive color binning structure graphical representation. Coordinates listed in Table 9.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
32
LUXEON Rebel Automotive White Color Binning Structure (A1 ... A10)
and White CAT Code Labeling Nomenclature
Table 10.
Automotive
Binning Scheme
CAT Code on
Product Label
A1
A2
A3
A7
A9
WN, W0
WP, WQ
VN, V0
TN, T0
SN, S0
Philips Lumileds Automotive White Color Bins (A1, A2, A3, A7, A9) are comprised of two white bins from the Philips Lumileds standard 18-Bin white
binning structure (i.e. WN, W0, etc.).
A1, A2, A3, A7, and A9 bins are supportable. Binning is program specific, and will be finalized upon mutual agreement and confirmation of
supportability by Philips Lumileds.
Philips Lumileds ships product tested and binned according to its standard white binning structure (WN, W0, etc.) in order to provide increased
color granularity. Therefore the product label uses the standard 18-Bin white binning CAT code labeling nomenclature. Table 10 may be used to
decode the standard white bins on the product label back to the corresponding automotive bins. For more information on the Philips Lumileds
standard 18-Bin white binning structure and its CAT code nomenclature please refer to AB21 on www.philipslumileds.com.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
33
LUXEON Rebel PC Amber Color Bin Structure
Figure 33: LUXEON Rebel PC Amber Automotive binning structure graphical representation. Coordinates listed in Table 11.
LUXEON Rebel PC Amber Color Bin Coordinates
Table 11.
LUXEON Rebel PC Amber Bin Coordinates
Color Bin
x
0.5622
2
0.5576
0.5775
0.5843
0.5705
4
0.5775
0.5576
0.5499
y
0.4372
0.4326
0.4132
0.4151
0.4111
0.4132
0.4326
0.4249
Notes for Table 11:
1. LUXEON Rebel PC Amber emitters are tested and binned by x, y coordinates.
2. Philips Lumileds maintains a tester tolerance of ± 0.005 on x, y coordinates.
3. Test conditions of 350 mA with current pulse duration of 20ms.
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
34
Red-Orange LUXEON Rebel Emitters for automotive applications are tested and binned for dominant wavelength.
Dominant Wavelength Color Bin Structure for
LUXEON Rebel Red-Orange AlInGap
Table 12.
Bin Code
Minimum Dominant
Wavelength (nm)
Maximum Dominant
Wavelength (nm)
2
613.5
620.5
Amber LUXEON Rebel Emitters for automotive applications are tested and binned for dominant wavelength.
Dominant Wavelength Color Bin Structure for
LUXEON Rebel Amber
Table 13.
Bin Code
Minimum Dominant
Wavelength (nm)
Maximum Dominant
Wavelength (nm)
2
4
587.0
589.5
589.5
592.0
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
35
Forward Voltage Bins
Table 14 and 15 lists minimum and maximum VF bin values per emitter. Although several bins are outlined, product availability in a particular bin
varies by production.
Table 14. Forward Voltage Bin Structure for LUXEON Rebel Automotive White, Red-Orange LXMA-PH01,
PC Amber and Amber Emitters
Minimum Forward Voltage
Maximum Forward Voltage
Bin Code
(V)
(V)
A
B
C
D
E
2.31
2.55
2.79
3.03
3.27
2.55
2.79
3.03
3.27
3.51
Table 15. Forward Voltage Bin Structure for LUXEON Rebel Automotive Red-Orange LXMA-PH02 Emitters
VF bins
Minimum Forward Voltage
Bin Code
(V)
Maximum Forward Voltage
(V)
V
W
X
Y
Z
1.80
2.00
2.20
2.40
2.60
2.00
2.20
2.40
2.60
2.80
LUXEON Rebel Automotive Specification Datasheet DS58 20121129
36
Company Information
Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output,
efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology
and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for
power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting,
shop lighting, home lighting, consumer electronics, and automotive lighting.
Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and
white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in
San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is
dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s
LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com.
©2012 Philips Lumileds Lighting Company. All rights reserved.
Product specifications are subject to change without notice.
LUXEON is a registered trademark of the Philips Lumileds
Lighting Company in the United States and other countries.
www.philipslumileds.com
www.philipslumileds.cn.com
Similar pages