JAE MX47039SF1 Compact waterproof automotive connector Datasheet

COMPONENTS PRODUCT INFORMATION
NEW
Compact Waterproof Automotive Connectors
MX47 Series
CONNECTOR
MB-0216-1
September 2010
RoHS Compliant
JAE has developed the MX47 Series compact, high-density waterproof connector for
automotive applications.
The MX47 Series utilizes a structure similar to the existing MX23A Series waterproof
connector, but is more compact while maintaining a low height.
The applicable cable and performance is equivalent or higher than the MX23A, there is a
guide key for secure mating, and pin terminals have Pb-free compliant complete plating.
Superior vibration resistance makes the connector ideally suited for use in harsh
environments such as the engine areas of both 2 and 4-wheeled vehicles.
Features
•2.5mm horizontal pitch, 3.6mm vertical pitch, 3 row board to wire connector.
•39 position, different keying available.
•Guide key for secure mating.
•Dowels on both side of connector for light press-fit to board for temporary holding.
•Socket terminal is a compact box type which is strong against external force.
•Retainer is a simple structure front cap type which is easy to attach.
•Pin terminal press-fit structure to prevent leakage of potting material.
•Slim type pin terminal with 0.5mm thickness and 1.0mm width.
General Specifications
•No. of Contacts: 39 pos.
(Different keying available)
•Contact Resistance:
5m ohm max. (initial)
10m ohm max. (after test)
•Rated Current: 3A
•Connector Insertion Force: 100 N max.
•Waterproof: 98 kPa min. (initial)
•Vibration Resistance:
20G (50 to 1000Hz) each pole / 9 hours
•Applicable Cable: AVSS 0.3 to 1.25sq
•Operating Temperature:
-40 Deg. C to +125 Deg. C
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
1/5
MB-0216-1
Structure, Materials and Finishes
■ Pin Connector
Component
Pin Housing
Pin Terminal 1, 2, 3
Material / Finish
30% GF PBT
Brass / Tin plating
Pin Terminal 1
Pin Terminal 2
Pin Terminal 3
Pin Housing
Component
Socket Housing
Seal Ring
Grommet
Rear Cover
Front Cap
Socket Terminal
■Socket Connector
Front Cap
Socket Terminal
Material / Finish
30% GF PBT
Silicone Rubber
Silicone Rubber
30% GF PBT
30% GF PBT
Brass / Tin plating
Rear Cover
Grommet
Socket Housing
Seal Ring
Front Cap
Socket Terminal
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
2/5
MB-0216-1
Product Drawing
■Socket Housing (Available with different keying)
Part Number: MX47039SF1
SJ Drawing: SJ109556
(Pitch)
■ Front Cap (Same for different keying product)
Part Number: MX47039XF1
SJ Drawing: SJ109558
(Pitch)
Company Emblem, Cavity Mark
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
3/5
MB-0216-1
■ Pin Connector (Available with different keying)
Part Number: MX47039NF1
SJ Drawing: SJ109562
Lot Number
(Pitch)
B105121
Applicable 適合基板寸法(参考)
Dimensions of Board
(For reference)
Company Emblem,
Cavity Mark
Material
■ Socket Terminal (Two other sizes available according to wire size.)
Part Number: M47S65H2FA
SJ Drawing: SJ109559
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
4/5
MB-0216-1
Product Line-up
Pin Connector
Socket Connector
Front Cap
Socket Terminal
Dummy Plug
Part Number
MX47039NF1
MX47039NF2
MX47039SF1
MX47039SF2
SJ Drawing
SJ109562
SJ109563
SJ109556
SJ109557
MX47039XF1
SJ109558
M47S65H4FA
M47S65H3FA
M47S65H2FA
M120-55780
SJ109561
SJ109560
SJ109559
SJ036379
Remarks
Standard Product
Different Keying Product
Standard Product
Different Keying Product
Can be used for both standard
and different keying products
Refer to below for
applicable wire and Tooling.
Same as MX23A Connector
Crimp Tools
Socket Terminal
Applicable Wire
Hand Crimp Tool
M47S65H4FA
0.3~0.5mm , φ1.4~1.6
AVSS 0.3, 0.5 equivalent
M47S65H3FA
0.75~0.85mm , φ1.8
AVSS0.85 equivalent
M47S65H2FA
1.25mm , φ2.1
AVSS1.25 equivalent
2
CT160-3-MX47
2
CT160-3B-MX47
2
Handling Instructions
3502-MX47-2
CT160-3C-MX47
Terminal Removal Tool
Specifications
Semi-Automatic
Applicator
ET-MX47
JACS-10621
JAHL-10621
Notice: Products shown in this leaflet are
Japan Aviation Electronics Industry, Limited
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: Computers, Office
machines, Measuring devices,
Telecommunication devices (Terminals, Mobile
devices), AV devices, Household applications, FA
devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
5/5
Similar pages