Lumileds L2C5-30HG1216E2300 Fashion retail lighting that makes an impact, highlighting rich colors and increasing contrast Datasheet

Illumination
LUXEON CoB with
CrispColor Technology™
Fashion retail lighting that makes an
impact, highlighting rich colors and
increasing contrast
The LUXEON CoB with CrispColor Technology LED is the ultimate solution
that makes colors pop and makes fabrics come to life. With efficient
solid state lighting technology, the contrast of colors has never been so
vivid. Our special phosphor technology has created a higher gamut color
rendering than existing solutions with a specific color point below the
Black Body Line to allow for Class A products. Combined with industry
leading performance, LUXEON CoB with CrispColor Technology creates
a highly impactful retail experience with all of the advantages of our
LUXEON CoB range, including lowest Rth, small Light Emitting Surface (LES)
and 3-step MacAdam ellipse color definition, which is tested at 85°C.
Features and Benefits
Primary Applications
Highest flux densities with industry’s smallest Light Emitting Surface (LES)
Downlights
3-step MacAdam ellipse color definition: Freedom from Binning for color
consistency from luminaire to luminaire
Up to 4x lower thermal resistance than competition, enabling smaller
heatsinks and higher lumens
Supported by a comprehensive optical, mechanical and electrical ecosystem
DS165 LUXEON CoB with CrispColor Technology Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
Indoor Area Lighting
Lamps
Spotlights
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Packaging and Labeling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Inner Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Outer Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON CoB with CrispColor Technology LEDs are tested and binned with a DC drive current specified below at a junction
temperature, Tj, of 85°C:
200mA
-
LUXEON CoB 1202s
200mA
-
LUXEON CoB 1202
300mA
-
LUXEON CoB 1203
450mA
-
LUXEON CoB 1204
600mA
-
LUXEON CoB 1205
900mA
-
LUXEON CoB 1208
1200mA -
LUXEON CoB 1211
1600mA -
LUXEON CoB 1216
Part Number Nomenclature
Part numbers for LUXEON CoB with CrispColor Technology follow the convention below:
L 2 C 5 – A A H G B B B B E C C 0 0
Where:
A A
– designates nominal CCT (27=2700K, 30=3000K, 33=3250K, 35=3500K, 40=4000K, 50=5000K)
B B B B – designates product configuration (example: 1202, 1203, 1204, 1205, 1208, 1211, 1216)
C C
– designates Light Emitting Surface (LES) size (06=6mm, 09=9mm, 13=13mm, 15=15mm,
19=19mm, 23=23mm)
Therefore, the following part number is used for a LUXEON CoB 1203, 3000K with a 9mm LES:
L 2 C 5 – 3 0 H G 1 2 0 3 E 0 9 0 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON CoB with
CrispColor Technology is compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add
the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB)
or polybrominated diphenyl ethers (PBDE).
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON CoB with CrispColor Technology at specified test current, Tj=85°C.
PRODUCT
LUXEON
CoB
1202s
LUXEON
CoB
1202
LUXEON
CoB
1203
LUXEON
CoB
1204
LUXEON
CoB
1205
NOMINAL
CCT
Minimum
CRI [1, 2, 3]
2700K
Luminous Flux [1] (lm)
Typical
Luminous
Efficacy
(lm/W)
TEST
CURRENT
(mA)
LES
(mm)
Part Number
Minimum
Typical
90
588
653
95
200
6
L2C5-27HG1202E0600
3000K
90
648
700
101
200
6
L2C5-30HG1202E0600
3250K
90
675
720
104
200
6
L2C5-33HG1202E0600
3500K
90
656
729
106
200
6
L2C5-35HG1202E0600
4000K
90
690
767
111
200
6
L2C5-40HG1202E0600
5000K
90
716
796
115
200
6
L2C5-50HG1202E0600
2700K
90
613
681
99
200
9
L2C5-27HG1202E0900
3000K
90
648
720
104
200
9
L2C5-30HG1202E0900
3250K
90
675
750
109
200
9
L2C5-33HG1202E0900
3500K
90
683
759
110
200
9
L2C5-35HG1202E0900
4000K
90
720
800
116
200
9
L2C5-40HG1202E0900
5000K
90
748
831
120
200
9
L2C5-50HG1202E0900
2700K
90
907
1008
97
300
9
L2C5-27HG1203E0900
3000K
90
972
1080
104
300
9
L2C5-30HG1203E0900
3250K
90
1017
1130
109
300
9
L2C5-33HG1203E0900
3500K
90
1035
1150
111
300
9
L2C5-35HG1203E0900
4000K
90
1066
1184
114
300
9
L2C5-40HG1203E0900
5000K
90
1106
1229
119
300
9
L2C5-50HG1203E0900
2700K
90
1424
1582
101
450
13
L2C5-27HG1204E1300
3000K
90
1494
1660
106
450
13
L2C5-30HG1204E1300
3250K
90
1575
1750
112
450
13
L2C5-33HG1204E1300
3500K
90
1594
1771
113
450
13
L2C5-35HG1204E1300
4000K
90
1656
1840
117
450
13
L2C5-40HG1204E1300
5000K
90
1737
1930
123
450
13
L2C5-50HG1204E1300
2700K
90
1850
2055
98
600
13
L2C5-27HG1205E1300
3000K
90
1953
2170
103
600
13
L2C5-30HG1205E1300
3250K
90
2034
2260
108
600
13
L2C5-33HG1205E1300
3500K
90
2070
2300
110
600
13
L2C5-35HG1205E1300
4000K
90
2172
2413
115
600
13
L2C5-40HG1205E1300
5000K
90
2255
2506
119
600
13
L2C5-50HG1205E1300
Table 1 continued on next page.
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. R9 value of 90CRI products is >50.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
3
Table 1. Product performance of LUXEON CoB with CrispColor Technology at specified test current, Tj=85°C (continued).
PRODUCT
LUXEON
CoB
1208
LUXEON
CoB
1211
LUXEON
CoB
1216
NOMINAL
CCT
Minimum
CRI [1, 2, 3]
2700K
90
Luminous Flux [1] (lm)
Minimum
Typical
2775
3083
Typical
Luminous
Efficacy
(lm/W)
TEST
CURRENT
(mA)
LES
(mm)
Part Number
98
900
15
L2C5-27HG1208E1500
3000K
90
2970
3300
105
900
15
L2C5-30HG1208E1500
3250K
90
3105
3450
110
900
15
L2C5-33HG1208E1500
3500K
90
3105
3450
110
900
15
L2C5-35HG1208E1500
4000K
90
3263
3626
116
900
15
L2C5-40HG1208E1500
5000K
90
3389
3766
120
900
15
L2C5-50HG1208E1500
2700K
90
3803
4226
101
1200
19
L2C5-27HG1211E1900
3000K
90
4023
4470
107
1200
19
L2C5-30HG1211E1900
3250K
90
4190
4656
111
1200
19
L2C5-33HG1211E1900
3500K
90
4264
4738
113
1200
19
L2C5-35HG1211E1900
4000K
90
4466
4962
119
1200
19
L2C5-40HG1211E1900
5000K
90
4638
5153
123
1200
19
L2C5-50HG1211E1900
2700K
90
4994
5549
101
1600
23
L2C5-27HG1216E2300
3000K
90
5273
5859
106
1600
23
L2C5-30HG1216E2300
3250K
90
5492
6102
111
1600
23
L2C5-33HG1216E2300
3500K
90
5589
6210
113
1600
23
L2C5-35HG1216E2300
4000K
90
5864
6515
118
1600
23
L2C5-40HG1216E2300
5000K
90
6089
6766
123
1600
23
L2C5-50HG1216E2300
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. R9 value of 90CRI products is >50.
Optical Characteristics
Table 2. Optical characteristics for LUXEON CoB with CrispColor Technology at specified test current, Tj=85°C.
Part Number
Typical Total Included Angle [1]
Typical Viewing Angle [2]
L2C5-xxHG12xxExx00
135°
115°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
4
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON CoB with CrispColor Technology at specified test current, Tj=85°C.
Forward Voltage [1] (Vf)
Typical Thermal
Resistance—Junction
TO CASE [3] (°C/W)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
L2C5-xxHG1202E0600
32.5
34.5
37.5
-16
0.98
L2C5-xxHG1202E0900
32.5
34.5
37.5
-16
0.98
L2C5-xxHG1203E0900
32.5
34.5
37.5
-16
0.70
L2C5-xxHG1204E1300
32.5
34.8
37.5
-16
0.55
L2C5-xxHG1205E1300
32.5
35.0
37.5
-16
0.51
L2C5-xxHG1208E1500
32.5
34.8
37.5
-16
0.29
L2C5-xxHG1211E1900
32.5
34.8
37.5
-16
0.23
L2C5-xxHG1216E2300
32.5
34.5
37.5
-16
0.14
Part Number
Notes for Table 3:
1. Lumileds maintains a tolerance of ±2% on forward voltage measurements.
2. Measured between 25°C and 85°C for coefficient of forward voltage.
3. Thermal resistance is measured between junction and the bottom of the LUXEON CoB substrate.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON CoB with CrispColor Technology.
Parameter
Maximum Performance
DC Forward Current
LED Junction Temperature
[1]
[1, 2]
(DC & Pulse)
2x test current
125°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3B
Operating Case Temperature [1]
-40°C to 105°C
LED Storage Temperature
-40°C to 120°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
5
Characteristic Curves
Spectral Power Distribution Characteristics
1
CrispColor Technology
LUXEON Stylist CrispColor 2700K
LUXEON Stylist CrispColor 3000K
LUXEON Stylist CrispColor 3250K
LUXEON Stylist CrispColor 4000K
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
380
420
460
500
540
580
620
660
700
740
780
Figure 1. Typical normalized power vs. wavelength for LUXEON CoB with CrispColor Technology at specified test current, Tj=85°C.
Light Output Characteristics
Figure 2. Typical normalized light output vs. junction temperature
for LUXEON CoB with CrispColor Technology at specified test current.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
6
L2C5-xxHG1202E0600
L2C5-xxHG1202E0900
L2C5-xxHG1203E0900
L2C5-xxHG1204E1300
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
7
L2C5-xxHG1205E1300
L2C5-xxHG1211E1900
L2C5-xxHG1208E1500
L2C5-xxHG1216E2300
Figure 3. Typical normalized light output vs. forward current for LUXEON CoB with CrispColor Technology at Tj=85°C.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
8
Forward Current Characteristics
L2C5-xxHG1202E0600
L2C5-xxHG1203E0900
L2C5-xxHG1202E0900
L2C5-xxHG1204E1300
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
9
L2C5-xxHG1205E1300
L2C5-xxHG1208E1500
L2C5-xxHG1211E1900
L2C5-xxHG1216E2300
Figure 4. Typical forward current vs. forward voltage for LUXEON CoB with CrispColor Technology at Tj=85°C.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
10
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for LUXEON CoB with CrispColor Technology at specified test current, Tj=85ºC.
Figure 6. Typical polar radiation pattern for LUXEON CoB with CrispColor Technology at specified test current, Tj=85ºC.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
11
Color Bin Definitions
Figure 7. 3-step MacAdam ellipse illustration for Table 5.
Table 5. 3-step MacAdam ellipse color bin definition for LUXEON CoB with CrispColor Technology.
Nominal CCT
Color Space
Center Point [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
2700K
Single 3-step MacAdam ellipse
(0.443, 0.377)
0.00810
0.00420
53.70°
3000K
Single 3-step MacAdam ellipse
(0.421, 0.372)
0.00834
0.00408
53.20°
3250K
Single 3-step MacAdam ellipse
(0.408, 0.371)
0.00834
0.00408
53.20°
3500K
Single 3-step MacAdam ellipse
(0.398, 0.366)
0.00927
0.00414
54.00°
4000K
Single 3-step MacAdam ellipse
(0.377, 0.356)
0.00939
0.00402
53.70°
5000K
Single 3-step MacAdam ellipse
(0.346, 0.340)
0.00822
0.00354
59.60°
Notes for Table 5:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
12
Mechanical Dimensions
L2C2-xxxx1202E0900
R1.6
2x
16±0.2
3.5
3.5
2
+0.5
9 - 0.1
11.3±0.3
6.5
CL
CL
19±0.2
6
6.5
0.1
2
xxxx 1202
CL
3.5
3.5
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
L2C5-xxHG1202E0600
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
GD&T SYMBOLOGY
PER
METRIC
R1.6
2x
3.5
ASME Y14.5M-1994
DRAW ING
16±0.2
1±0.1
6
T. VU
2013-01-24
DRAW N BY
DATE
ENGINEER/CHECKER
DATE
16x19 LES9
L2C5-xxHG1202E0900
T. VU / R. HELBING
2013-01-24
COB DATASHEET
YYYY-MM-DD
DRAWING
UNLESS OTHERW ISE SPECIFIED
TITLE
FRAME DATE: 2011-04-18
1
° THIRD ANGLE PROJECTION
OF
L2C2-xxxx1204E1300
R1.6
2x
3.5
0.5±0.2
° DIMENSIONS ARE IN MILLIMETERS
DO NOT SCALE THIS
L2C2-xxxx1203E0900
2
4.5
1
B
5:1
SHEET
SCALE
SIZE
R1.6
2x
3.5
0.1
15.5±0.3
+0.5
9 - 0.1
15.5±0.3
2
2
+0.5
13 - 0.1
11.3±0.3
+0.5
13 - 0.1
8
6.5
CL
CL
19±0.2
CL
24±0.2
6
6.5
0.1
2
xxxx 1203
3.5
CL
3.5
8
CL
8
8.5
2
2
2
xxxx 1204
1±0.1
6
2
CL
0.5±0.2
3.5
4.5
1±0.1
7.5
20±0.2
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
DO NOT SCALE THIS
METRIC
DRAW ING
T. VU
2013-01-24
DRAW N BY
DATE
GD&T SYMBOLOGY
PER
16x19 LES9
COB DATASHEET
DRAWING
T. VU
/ R. HELBING
2013-01-24
L2C5-xxHG1203E0900
ENGINEER/CHECKER
DATE
UNLESS OTHERW ISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
ASME Y14.5M-1994
YYYY-MM-DD
° THIRD ANGLE PROJECTION
24±0.2
TITLE
1
FRAME DATE: 2011-04-18
OF
SHEET
1
5:1
SCALE
B
SIZE
L2C5-xxHG1204E1300
T. VU
2013-01-24
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
DO NOT SCALE THIS
METRIC
DRAW ING
DRAW N BY
DATE
T. VU / R. HELBING
2013-01-24
ENGINEER/CHECKER
DATE
UNLESS OTHERW ISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
GD&T SYMBOLOGY
PER
° THIRD ANGLE PROJECTION
ASME Y14.5M-1994
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
3.5
0.5±0.2
YYYY-MM-DD
20x24 LES13
COB DATASHEET
DRAWING
TITLE
1
FRAME DATE: 2011-04-18
OF
SHEET
1
5:1
SCALE
B
SIZE
13
L2C2-xxxx1205E1300
R1.6
2x
4.5
L2C2-xxxx1208E1500
4.5
R1.6
2x
3.5
3.5
0.1
0.1
15.5±0.3
0.1
2
2
+0.5
15 - 0.1
+0.5
13 - 0.1
17.5±0.3
8
CL
CL
CL
CL
24±0.2
8
8
CL
24±0.2
8
8.5
8.5
2
2
xxxx 1205
2
xxxx 1208
2
CL
1±0.1
3.5
4.5
20x24 LES13
COB DATASHEET
DRAWING
1
3.5
1±0.1
7.5
SHEET
1
5:1
SCALE
7.5
4.5
1±0.1
20±0.2
0.5±0.2
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
L2C5-xxHG1205E1300
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
FRAME DATE: 2011-04-18
OF
2
CL
20±0.2
0.5±0.2
TITLE
CL
B
2013-01-24
20x24 LES15
L2C5-xxHG1208E1500
2013-01-24
COB DATASHEET
DRAWING
T. VU
DRAW N BY
DATE
YYYY-MM-DD
T. VU / R. HELBING
DATE
ENGINEER/CHECKER
UNLESS OTHERW ISE SPECIFIED
TITLE
° DIMENSIONS ARE IN MILLIMETERS
DO NOT SCALE THIS
GD&T SYMBOLOGY
PER
METRIC
SIZE
0.5±0.2
ASME Y14.5M-1994
DRAW ING
FRAME DATE: 2011-04-18
1
° THIRD ANGLE PROJECTION
OF
1
B
5:1
SHEET
SCALE
SIZE
L2C2-xxxx1211E1900
CL
CL
2X
2x
9.4
3.2
11.4
12
3.2
xxxx 1216
xxxx 1211
2
0.1
11.4
6.4 9.4
2
CL
CL
28±0.2
CL
CL
12
9.4
11.4
+0.5
23 - 0.1
3.2
9.4
11.4
0.5±0.2
1±0.1
25±0.3
28±0.2
TOLERANCES
MMW
28X28 LES19
L2C5-xxHG1211E1900
1/20/14
COB DATA SHEET
DRAWING
1/20/14
DRAWN BY
DATE
L2C5-xxHG1216E2300
YYYY-MM-DD
RENE/THUY
ENGINEER/CHECKER
DATE
UNLESS OTHERWISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
DO NOT SCALE THIS
METRIC
DRAWING
GD&T SYMBOLOGY
PER
ASME Y14.5M-1994
TITLE
° THIRD ANGLE PROJECTION
MATERIAL
FINISH
1
FRAME DATE: 2013-05-10
OF
SHEET
1
4:1
SCALE
B
SIZE
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
XX.
0.2mm
XX.X
0.1mm
XX.XX
0.05mm
ANGULAR:
XX
1
XX.X
0 30'
XX.XX 0 00'30"
TOLERANCE TYPE
DO NOT SCALE THIS
GD&T SYMBOLOGY
PER
METRIC
DRAW ING
ASME Y14.5M-1994
MMW
DRAW N BY
RENE/THUY
ENGINEER/CHECKER
7/8/14
YYYY-MM-DD
DATE
7/8/14
DATE
UNLESS OTHERW ISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
° THIRD ANGLE PROJECTION
° ADHERENCE TO DW G A-5951-1561-1
(COMPANY STD. SECTION 608) AND
A-5951-1745-1 (GSE) IS REQUIRED
YYYY-MM-DD
28X28 LES23
COB DATA SHEET
DRAWING
TITLE
1
FRAM E DATE: 2007-06-29
OF
SHEET
1
N/A
SHEET SCALE
B
SIZE
Figure 8. Mechanical dimensions for LUXEON CoB with CrispColor Technology.
Notes for Figure 8:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
14
Packaging and Labeling Information
LUXEON CoB with CrispColor Technology LEDs are packaged in tubes then in a carton box. Each tube contains a specified
number of LEDs. The LEDs in each tube come from a single category code, ensuring they are all well-matched for light output,
color, and forward voltage. Each tube contains a rubber stopper at one end. The tube label has both alphanumeric and bar code
information. The carton boxes have printed information providing part numbers with CAT codes that indicate luminous flux,
color and forward voltage bins.
Table 6. Package information for LUXEON CoB with CrispColor Technology.
Part Number
TOTAL UNITS PER TUBE
TOTAL TUBES PER Inner box
TOTAL UNITS PER Inner box
L2C5-xxHG1202E0600
20
5
100
L2C5-xxHG1202E0900
20
5
100
L2C5-xxHG1203E0900
20
5
100
L2C5-xxHG1204E1300
20
5
100
L2C5-xxHG1205E1300
20
5
100
L2C5-xxHG1208E1500
20
5
100
L2C5-xxHG1211E1900
10
5
50
L2C5-xxHG1216E2300
10
5
50
Tube
Figure 9a. Tube dimensions for L2C5-xxHG1202E0600.
Figure 9b. Tube dimensions for L2C5-xxHG120xE0900.
Notes for Figures 9a and 9b:
1. Drawings not to scale.
2. All dimensions are in millimeters.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
15
Figure 9c. Tube dimensions for L2C5-xxHG120xE1300 and L2C5-xxHG1208E1500.
Figure 9d. Tube dimensions for L2C5-xxHG1211E1900 and L2C5-xxHG1216E2300.
Notes for Figures 9c and 9d:
1. Drawings not to scale.
2. All dimensions are in millimeters.
Figure 10. Example of a tube label for LUXEON CoB with CrispColor Technology.
Notes for Figure 10 - Tube Label descriptions for customer use:
Field labels not described are for Lumileds internal use only.
1. Lumileds part number.
2. Unique production lot identification number. This number is required for traceability purpose.
3. Product category code.
4. Number of LED emitters in a tube.
5. LED test date in YYWW format.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
16
Inner Box
Figure 11. Dimensions for inner box packaging for LUXEON CoB with CrispColor Technology.
Table 7. Inner box information for LUXEON CoB with CrispColor Technology.
BOX TYPE
Inner Box
DIMENSIONS (mm)
H
l
W
AVERAGE WEIGHT
(100pcs/box)
AVERAGE WEIGHT
(100pcs/box)
30
490
95
0.340Kg
0.305Kg
Figure 12. Example of inner box label for LUXEON CoB with CrispColor Technology.
Notes for Figure 12 – Inner Box Label descriptions for customer use:
Field labels not described are for Lumileds internal use only.
1. Lumileds part number.
2. Number of LED emitters in a box.
3. LED test date in YYWW format.
4. Customer part number for custom requests only.
5. Unique production lot identification number. This number is required for traceability purpose.
6. Product category code.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
17
Outer Box
Figure 13. Dimensions for outer box packaging for LUXEON CoB with CrispColor Technology.
Table 8. Outer box information for LUXEON CoB with CrispColor Technology.
BOX TYPE
DIMENSIONS (mm)
H
l
W
MAXIMUM
INNER BOXES
PER OuTER BOX
MAXIMUM QUANTITY
PER OUTER BOX
AVERAGE WEIGHT
(100pcs/box)
AVERAGE WEIGHT
(50pcs/box)
Outer Box 8 PCS
122
510
290
8
800
3.05Kg
2.77Kg
Outer Box 20 PCS
247
510
310
20
2000
7.55Kg
6.85Kg
Outer Box 40 PCS
320
510
360
40
4000
15.10Kg
13.70Kg
Figure 14. Example of outer box label for LUXEON CoB with CrispColor Technology.
Notes for Figure 14 – Outer Box Label descriptions for customer use:
Field labels not described are for Lumileds internal use only.
1. Country code of origin of manufacturing of parts (e.g. MY for Malaysia, CN for China) according to ISO 3166-1 alpha-2 document.
2. Lumileds part number.
3. Customer part number for custom requests only.
4. Total number of LED emitters in a shipment box.
DS165 LUXEON CoB with CrispColor Technology Product Datasheet 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
18
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS165 LUXEON CoB with CrispColor Technology
Product Datasheet 20161102
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.
Similar pages