MTRONPTI M214128M1N Multiple frequency clock oscillator 5x7 mm, 3.3/2.5/1.8 volt, lvpecl/lvds/cml/hcmos output Datasheet

M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Product Features
•
•
•
•
•
•
Multiple Output Frequencies (2, 3, or 4) - Selectable
QiK ChipTM Technology
Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz
- 20 MHz)
SAW replacement - better performance
Frequencies from 50 MHz - 1.4 GHz (LVDS/LVPECL/CML)
Frequencies from 10 MHz - 150 MHz (HCMOS)
QiK Chip™
Product Description
The multiple frequency oscillator utilizes MtronPTI’s Qik ChipTM technology to provide a very low jitter clock
for all output frequencies. The M21x is available with up to 4 different frequency outputs from 10MHz through
1.4 GHz. The M21x utilizes the stable fundamental 3rd overtone crystal and the Qik ChipTM IC to provide the
wide range of output frequencies. Using this design approach, the M21x provides exceptional performance in
frequency stability, jitter, phase noise and long term reliability.
Product Applications
•
•
•
•
•
Global/Regional selection
Forward Error Correction (FEC) / Selectable Functionality
applications
Telecommunications such as SONET / SDH / DWDM / FEC
/ SERDES / OC-3 thru OC-192
1-2-4-10 Gigabit Fibre Channel
Wireless base stations / WLAN / Gigabit Ethernet
•
•
•
•
•
•
xDSL, Network Communications
Avionic flight controls
Military communications
Clock and data recovery
Low jitter clock generation
Frequency margining
Product Ordering Information
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 8-22-08
M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Performance Characteristics
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Phase Noise Plot
Output Waveform
Output Waveform: LVDS/CML/LVPECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Product Dimension & Pinout Information
DENOTES PIN 1
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Handling Information
Although protection circuitry has been designed into the M21x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Model Number
Line 2: Frequency
Line 3: Date Code
Line 4: Pin 1 Indicator / MtronPTI
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Tape & Reel Specifications
(all measurements
are in mm)
M21x
A
B
C
D
E
F
G
H
I
J
K
L
6.51
9.29
1.5
7.5
2.8
4
8/12
16
180-330
13
21
60-100
Standard Tape and Reel: 1000 parts per reel
Maximum Soldering Conditions
Solder Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M21x Series Multiple Frequency Clock Oscillator
5x7 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML/HCMOS Output
Typical Test Circuit & Load Circuit Diagrams
Product Revision Table
Date
7/20/07
Revision
A
PCN Number Details of Revision
10118
IC Revision to improve phase noise and electrical performance
For custom products or additional specifications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7
Similar pages