MINI MAR-4 Monolithic amplifier dc-1 ghz Datasheet

Drop-In
Monolithic Amplifier
DC-1 GHz
Product Features
• Wideband, DC to 1 GHz
• High IP3, 25.5 dBm typ.
• Internally Matched to 50 Ohms
• Low noise figure, 7.0 dB typ.
• Exact foot print substitute for MSA-0485
• Cascadable, unconditionally stable
• Aqueous washable
• Protected by US Patent 6,943,629
MAR-4+
CASE STYLE: VV105
PRICE: $1.29 ea. QTY. (30)
Typical Applications
+RoHS Compliant
• Cellular
• PCN instrumentation
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
General Description
MAR-4+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot. It is enclosed in a Micro-X package. MAR-4+ uses Darlington configuration and is
fabricated using InGaP HBT technology. Expected MTBF is 1,000 years at 85°C case temperature.
simplified schematic and pin description
RF-OUT and DC-IN
RF-OUT and DC-IN
3
RF IN
GND
4
GND
2
1
RF IN
GROUND
Function
Pin Number
Description
RF IN
1
RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF-OUT and DC-IN
3
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
GND
2,4
Connections to ground. Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
REV. B
M120653
MAR-4+
150320
Page 1 of 4
MAR-4+
Monolithic InGaP HBT MMIC Amplifier
Electrical Specifications at 25°C and 50mA, unless noted
Parameter
Min.
Frequency Range*
Typ.3
DC
f=0.1 GHz
f=1 GHz
Gain
8.3
8.0
—
7.02
Max.
Units
1
GHz
—
—
dB
Input Return Loss
f=DC to 1 GHz
14
dB
Output Return Loss
f=DC to 1 GHz
10
dB
Output Power @ 1 dB compression
f= 1 GHz
+12.5
dBm
Output IP3
f=1 GHz
+25.5
dBm
Noise Figure
f=1 GHz
6.0
dB
50
5.25
-2.2
23
152
mA
V
mV/°C
mV/mA
°C/W
Recommended Device Operating Current
Device Operating Voltage
Device Voltage Variation vs. Temperature at 50 mA
Device Voltage Variation vs. Current at 25°C
Thermal Resistance, junction-to-case1
*Guaranteed specification DC-1 GHz. Low frequency cut off determined by external coupling capacitors.
Absolute Maximum Ratings
Parameter
Ratings
Operating Temperature
-40°C to 85°C
Storage Temperature
-55°C to 100°C
Operating Current
85mA
Power Dissipation
500mW
Input Power
13dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
1
Case is defined as ground leads.
2
Full temperature range.
3
Based on test data of Model MAR-4SM+ (Case Style WW107).
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 2 of 4
MAR-4+
Monolithic InGaP HBT MMIC Amplifier
Product Marking
3
04
4
2
index over pin 1
1
Markings in addition to model number designation may appear for internal quality control purposes.
Additional Detailed Technical Information
Additional information is available on our web site. To access this information enter the model number on
our web site home page.
Performance data, graphs, s-parameter data set (.zip file)
Case Style: VV105
Plastic micro-x, .085 body diameter, lead finish: tin-silver over nickel
Tape & Reel: F20
Suggested Layout for PCB Design: PL-262
Evaluation Board: TB-432-4+
Environmental Ratings: ENV08T3
Recommended Application Circuit
R BIAS
R bias (R equired)
V cc
C bypas s
C block
IN
4
Ibias
R F C (Optional)
3
Vd
1
2
OUT
C block
Test Board includes case, connectors, and components (in bold) soldered to PCB
Vcc
“1%” Res. Values (ohms)
for Optimum Biasing
7
34.8
8
54.9
9
75
10
95.3
11
115
12
133
13
154
14
174
15
196
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 3 of 4
MAR-4+
Monolithic InGaP HBT MMIC Amplifier
ESD Rating
Human Body Model (HBM): Class 1B (500v to < 1000v) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 ( < 100v) in accordance with ANSI/ESD STM 5.2 - 1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020C
No.
Test Required
Condition
Standard
Quantity
1
Visual Inspection
Low Power Microscope
Magnification 40x
MIP-IN-0003
(MCT spec)
45 units
2
Electrical Test
Room Temperature
SCD
(MCL spec)
45 units
3
SAM Analysis
Less than 10% growth in term of
delamination
J-Std-020C
(Jedec Standard)
45 units
4
Moisture Sensitivity
Level 1
Bake at 125°C for 24 hours
Soak at 85°C/85%RH for 168 hours
Reflow 3 cycles at 260°C peak
J-Std-020C
(Jedec Standard)
45 units
MSL Test Flow Chart
Start
Visual
Inspection
Electrical Test
SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test
SAM Analysis
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 4 of 4
Similar pages