MTRONPTI M61518STSN 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 v, hcmos or clipped sine wave, precision tcxo/tcvcxo Datasheet

M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Product Features
Features
• Stratum 3 Performance with 0.34 ppm (pk-pk) Holdover Stability Over
Industrial Temperature Range (-40 °C to +85 °C)
• 3.0 V, 3.3 V and 5.0 V Options
• Low Phase Noise and Excellent G-Sens Performance (1.5 ppb/g)
• Tristate Function Available
• Available in Clipped Sine Wave or HCMOS
Applications
• Synchronous Ethernet Slave Clocks ITU-T G.8262 EEC Options 1 & 2
• Compliant to Stratum 3 GR-1244-Core & GR-253-Core
• SONET/SDH Network Timing
• Wireless Communications
Product Description
MtronPTI’s M615x Series TCXO and TCVCXO provide network and wireless engineers with low voltage, surface mount
products with extremely tight stability over temperature and time. MtronPTI’s unique approach to crystal compensation
enables these devices to achieve full Stratum 3 compliance, including holdover stability over the industrial temperature
range (-40 °C to +85 °C). Specially processed crystals enable the M615x to achieve consistent long-term stability and
minimal frequency shift after reflow. This processing also achieves excellent g-sensitivity (1.5 ppb/g). The low phase
noise (-155 dBc/Hz at 100 kHz offset) makes the M615x ideal for the design engineer working on all types of systems as
the reference timing source.
Product Ordering Information
Ordering Information
M6151
2
S
T
S
N
00.0000
MHz
Product Series
M6150 = 5.0 V
M6151 = 3.3 V
M6152 = 3.0 V
Temperature Range
1: 0 °C to +70 °C
8: 0 °C to +50 °C
2: -40 °C to +85 °C
F: -30 °C to +75 °C
6: -20 °C to +70 °C
Stability
S: ±4.6 ppm w/Holdover
Output Type
T: Voltage Controlled With Tristate
F: No Voltage Control With Tristate
Output Waveform
C: HCMOS
S: Clipped Sine Wave
Package/Lead Configurations
N: Leadless Ceramic (10 pads)
Frequency (customer specified)
M615xSxxx - Custom datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Rev: 07/17/2013
M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Performance Characteristics
Parameter
Frequency Range
Initial Accuracy
Operating Temperature
Storage Temperature
Stability vs Temperature
Symbol
FO
FI
TA
TSTG
∆FVDD/F
∆FLOAD/F
Electrical Specifications
VOL
VOH
tDC
tR/tF
Units
Contact factory above 38.88 MHz.
@ +25 °C at time of shipment.
0.3
ppm
40
+4.6
ppb
ppm
±0.02
±0.1
±0.02
±0.1
Supply Voltage & Current
ppm
ppm
TA = -40 °C to +85 °C (includes Hysteresis)
Ref GR1244CORE
After 24 hours at constant temperature.
Includes initial calibration @ +25 °C,
deviation over temperature, supply voltage
and load variations, reflow, hysteresis, and
20 year aging.
±5 % change in voltage.
±5 % change in load.
-5.0
+5.0
3.0
4.0
5.2
2.0
2.7
3.5
%
mA
mA
mA
mA
mA
mA
(See Ordering Information)
HCMOS output at 13 MHz
HCMOS output at 26 MHz
HCMOS output at 38.88 MHz
Clipped Sine Wave output at 13 MHz
Clipped Sine Wave output at 26 MHz
Clipped Sine Wave output at 38.88 MHz
20
% VDD
% VDD
Vpk-pk
Vpk-pk
60
6.5
%
ns
-55
+125
Frequency Stabilities
80
1.0
0.8
40
50
15 pF
10 kΩ || 10 pF
±9.2
0.3
0.3
0.5
-50
100
Input Leakage Current
Input Resistance
Linearity
Modulation Bandwidth
Conditions/Notes
MHz
ppm
°C
°C
2.0
3.0
4.2
1.3
1.7
2.3
RF Output
Frequency Adjustment
Control Voltage Range
ppm
V
V
V
µA
kΩ
%
2.7
3.0
4.5
+50
5
IOH/IOL = ±4 mA, VDD = +3.0 V
IOH/IOL = ±4 mA, VDD = +3.0 V
FO < 40 MHz
FO > 40 MHz
Ref. to ½ VS. HCMOS Only
Ref. 10 % to 90 %. HCMOS only
HCMOS Output
Clipped Sine Wave Output
Over Control Voltage Range
For VDD = 3.0 V
For VDD = 3.3 V
For VDD = 5.0 V
2 kHz
Other Parameters
Tristate Function
70
Tristate Leakage Current
Phase Noise
(Typical 12.8 MHz HCMOS @ 3.3 V)
Environmental
Max.
-4.6
Supply Voltage (VDD) Tolerance
Supply Current (ID)
(Reference to VDD = 3.3 V)
Output Logic Levels
(HCMOS)
Output Level
(Clipped Sine Wave)
Symmetry (Duty Cycle)
Rise/Fall Time
Output Load
Typ.
8
38.88
-1.0
+1.0
(See Ordering Information)
∆FT/F
Stability vs Drift
Free-Run Accuracy
Stability vs Supply Voltage
Stability vs Load
Min.
30
+100
-100
-102
-132
-148
-154
-155
% VDD
% VDD
µA
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Output enabled. Logic “1” or “Open”
Output disabled. Logic “0” or “GND”
@ 10 Hz Offset
@ 100 Hz Offset
@ 1 kHz Offset
@ 10 kHz Offset
@ 100 kHz Offset
Shock
MIL-STD-202, Method 213, Condition C (100 g)
Vibration
MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz)
Solderability
EIAJ-STD-002
Package
5.0 mm x 7.0 mm, SMT and DIP (RoHS Compliant)
Max Soldering Conditions
See solder profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Phase Noise Plot
M615x 12.8 MHz Phase Noise
Output Waveform (HCMOS Output)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Product Dimension & Pinout Information
Pin Connections
Function
Pad
N/C - Do Not Connect
1
N/C - Do Not Connect
2
N/C - Do Not Connect
3
Ground
4
Output
5
N/C - Do Not Connect
6
N/C - Do Not Connect
7
Tristate
8
Supply Voltage (VDD)
9
Control Voltage
10
SUGGESTED SOLDER PAD LAYOUT
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Handling Information
Although protection circuitry has been designed into the M615x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Model
ESD Threshold, Minimum
Human Body
1500*
Charged Device
1500*
* MIL-STD-833D, Method 3015, Class 1
Unit
V
V
ATTENTION
Static Sensitive Devices
Handle only at Static
Safe Work Stations
Typical Test Circuits
Tristate
Control
N/C
Test Circuit - N Package
With Tristate
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Tape & Reel Specifications
(all measurements
are in mm)
M615x
A
B
C
D
E
F
G
H
J
K
L
M
N
5.40
7.40
1.55
7.50
2.60
2.00
4.00
16.00
330
13.00
20.20
100
16.40
Standard Tape and Reel: 1000 parts per reel
Maximum Soldering Conditions
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M615x Series
5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave,
Precision TCXO/TCVCXO
Quality Parameters
Test
Electrical Characteristics
Frequency vs. Temperature
Mechanical Shock
Vibration
Thermal Cycle
Aging
Gross Leak
Fine Leak
Solderability
Resistance to Solvents
Physical Dimensions
Internal Visual
Environmental Specifications/Qualification Testing Performed
Test Method
Test Condition
Internal Specification
Per Specification
Internal Specification
Per Specification
MIL-STD-202, Method 213, C
100 g’s
MIL-STD-202, Method 201-204
10 g’s from 10-2000 Hz
MIL-STD-883, Method 1010, B
-55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles
Internal Specification
168 Hours at 105 Degrees C
MIL-STD-202, Method 112
30 Second Immersion
MIL-STD-202, Method 112
Must meet 1x10-8
MIL-STD-883, Method 2003
8 Hour Steam Age – Must Exhibit 95% coverage
MIL-STD-883, Method 2015
Three 1 minute soaks
MIL-STD-883, Method 2016
Per Specification
Internal Specification
Per Internal Specification
Load Circuit
Load Circuit #7 - Clipped Sine Wave Output
Load Circuit #2 - HCMOS Output
DUT Output
DUT Output
Test Point
Test Point
10K Ohms
C Load
10 pF
Note: C Load includes probe and fixturing.
For custom products or additional specifications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7
Similar pages