Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series FEATURES • LOW IMPEDANCE & ESR AT HIGH FREQUENCY RoHS • HIGH RIPPLE CURRENT Compliant • REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES includes all homogeneous materials • FITS EIA (7343) “D” LAND PATTERNS • Pb-FREE (GOLD TERMINATION PLATING) *See Part P Number N b System S for f Details D il • COMPATIBLE WITH +260°C* REFLOW SOLDERING CHARACTERISTICS Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (μA) After 5 Minutes (+20°C) 2.0 ~ 10VDC 22 ~ 470μF -55 ~ +105°C ± 20% (M) Surge Voltage (1000 cycles, 30 sec. on, 5 min. 30 sec. off, 1KΩ) Working Voltage (Vdc) 2.0 2.5 4.0 6.3 8.0 10 Surge Voltage (Vdc) 2.6 3.2 5.2 8.2 10.4 11.5 Max. Tan δ, 120Hz, +20°C High Temperature Load Life 2,000 Hours @ 105°C at Rated Working Voltage after 2x recommended reflow profile Moisture Resistance 500 Hours @ +60°C at 90 ~ 95% RH and No Voltage Applied after 2x recommended reflow profile (JEDEC MSL-3) <0.04CV D1, D6 D5, D7, D8 Capacitance Change <0.05 <0.1 Within ±20% of initial measured value D7, D8 Less than 150% of specified max. value Less than 200% of specified max. value D1, D5, D6 Less than specified max. value Within -20%/+40% of initial measured value D5, *Within -20%/+60% of initial measured value D7, D8 Less than 150% of specified max. value D1, D5, D6 Less than 200% of specified max. value Less than 300% of specified max. value *Applies to values with asterisk in column "NIC Part Number" Tan δ Leakage Current Capacitance Change Tan δ Leakage Current STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+260°C Reflow) NPC101M2D5ZATRF NPC101M2D1UATRF NPC101M2D1ZATRF NPC101M2D6XATRF NPC101M2D6ZATRF NPC121M2D6ZATRF NPC151M2D5ZATRF NPC151M2D1UATRF NPC151M2D6ZATRF NPC181M2D5ZATRF NPC181M2D6ZATRF NPC221M2D5ZATRF NPC221M2D6YATRF NPC221M2D6ZATRF NPC221M2D7XATRF NPC271M2D6ZATRF NPC271M2D6YATRF NPC271M2D8YATRF NPC331M2D6ZATRF* NPC331M2D6YATRF* NPC331M2D6UATRF* NPC331M2D8YATRF NPC391M2D8YATRF NPC471M2D8YATRF NPC820M2.5D1ZATRF NPC820M2.5D6XATRF NPC820M2.5D6ZATRF NPC101M2.5D5ZATRF NPC101M2.5D1UATRF WV (Vdc) 2 2.5 Cap. (μF) 100 100 100 100 100 120 150 150 150 180 180 220 220 220 220 270 270 270 330 330 330 330 390 470 82 82 82 100 100 Max. LC (μA) 8.0 8.0 8.0 8.0 8.0 9.6 12.0 12.0 12.0 14.4 14.4 17.6 17.6 17.6 17.6 21.6 21.6 21.6 26.4 26.4 26.5 26.4 31.2 37.6 8.2 8.2 8.2 10.0 10.0 Tan δ 0.10 0.05 0.05 0.05 0.05 0.05 0.10 0.05 0.05 0.10 0.05 0.10 0.05 0.05 0.10 0.05 0.05 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.05 0.05 0.05 0.10 0.05 Max. Ripple Current (mArms) Max. ESR 100KHz @ +105°C +20°C & 100KHz (Ω) 2,700 0.009 3,000 0.005 3,000 0.009 3,000 0.013 3,000 0.009 3,000 0.009 2,700 0.009 3,000 0.005 3,000 0.009 2,700 0.009 3,000 0.009 2,700 0.009 3,000 0.007 3,000 0.009 3,500 0.010 3,000 0.009 3,500 0.006 3,500 0.007 3,000 0.009 3,500 0.006 3,500 0.0045 3,500 0.007 3,500 0.007 3,500 0.007 3,000 0.009 3,000 0.013 3,000 0.009 2,700 0.009 3,000 0.005 Height H ± 0.1 1.1 1.4 1.4 1.9 1.9 1.9 1.1 1.4 1.9 1.1 1.9 1.1 1.9 1.9 2.7 1.9** 1.9** 2.9 1.9** 1.9** 1.9** 2.9 2.9 2.9 1.4 1.9 1.9 1.1 1.4 *See note regarding DF in characteristics table (Moisture Resistance). **height dimension tolerance ±0.2mm NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series STANDARD PRODUCTS AND SPECIFICATIONS WV NIC Part Number (+260°C Reflow) (Vdc) NPC101M2.5D6ZATRF NPC121M2.5D1UATRF NPC121M2.5D6ZATRF NPC151M2.5D5ZATRF NPC151M2.5D6ZATRF NPC181M2.5D5ZATRF NPC181M2.5D6ZATRF NPC181M2.5D7XATRF NPC221M2.5D6YATRF* 2.5 NPC221M2.5D6ZATRF* NPC221M2.5D8YATRF NPC271M2.5D6ZATRF* NPC271M2.5D6YATRF* NPC271M2.5D8YATRF NPC331M2.5D8YATRF NPC391M2.5D6YATRF** NPC391M2.5D8ZATRF NPC680M4D5XATRF NPC680M4D1ZATRF NPC680M4D6XATRF NPC680M4D6ZATRF NPC820M4D6XATRF NPC101M4D6XATRF NPC121M4D6XATRF 4.0 NPC151M4D6XATRF NPC151M4D7XATRF NPC181M4D6ZATRF NPC181M4D8ZATRF NPC221M4D6ZATRF NPC221M4D8ZATRF NPC271M4D8ZATRF NPC330M6.3D6XATRF NPC470M6.3D5XATRF NPC470M6.3D1XATRF NPC470M6.3D6XATRF NPC470M6.3D6ZATRF NPC560M6.3D6XATRF NPC680M6.3D6XATRF NPC820M6.3D6XATRF 6.3 NPC101M6.3D6XATRF NPC101M6.3D7XATRF NPC121M6.3D6ZATRF* NPC121M6.3D8ZATRF NPC151M6.3D6ZATRF NPC151M6.3D8ZATRF NPC181M6.3D8ZATRF NPC221M6.3D8ZATRF NPC150M8D6XATRF NPC220M8D6ATRF NPC330M8D6ATRF NPC330M8D7XATRF 8 NPC470M8D6ATRF NPC680M8D7ATRF NPC101M8D7ATRF NPC220M10D6ATRF 10 NPC470M10D6ATRF Cap. (μF) 100 120 120 150 150 180 180 180 220 220 220 270 270 270 330 390 390 68 68 68 68 82 100 120 150 150 180 180 220 220 270 33 47 47 47 47 56 68 82 100 100 120 120 150 150 180 220 15 22 33 33 47 68 100 22 47 Max. LC (μA) 10.0 12.0 12.0 15.0 15.0 18.0 14.4 18.0 22.0 22.0 22.0 27.0 27.0 27.0 33.0 39.0 39.0 10.9 10.9 10.9 10.9 13.1 16.0 19.2 24.0 24.0 28.8 28.8 35.2 35.2 43.2 8.3 11.8 11.8 11.8 11.8 14.1 17.1 20.7 25.2 25.2 30.2 30.2 37.8 37.8 45.4 55.4 4.8 7.0 10.6 10.6 11.8 21.8 32.0 8.8 18.8 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Frequency 1KHz<=f<10KHz Correction 0.6 Factor 2 10KHz<=f<100KHz 100KHz<=f<1MHz 0.85 1.0 NIC COMPONENTS CORP. www.niccomp.com Max. Ripple Current (mArms) Max. ESR Height 100KHz @ +105°C +20°C & 100KHz (Ω) H ± 0.1 0.05 3,000 0.009 1.9 0.05 3,000 0.005 1.4 0.05 3,000 0.009 1.9 0.10 2,700 0.009 1.1 0.05 3,000 0.009 1.9 0.10 2,700 0.009 1.1 0.05 3,000 0.009 1.9 0.10 3,500 0.010 2.7 0.10 3,500 0.006 1.9** 0.10 3,000 0.009 1.9** 0.10 3,500 0.007 2.9 0.10 3,000 0.009 1.9** 0.10 3,500 0.006 1.9** 0.10 3,500 0.007 2.9 0.10 3,500 0.007 2.9 0.10 3,500 0.006 1.9** 0.10 3,500 0.009 2.9 0.10 2,100 0.015 1.1 0.05 3,000 0.009 1.4 0.05 3,000 0.013 1.9 0.05 3,000 0.009 1.9 0.05 3,000 0.010 1.9 0.05 3,000 0.010 1.9 0.05 3,000 0.010 1.9 0.05 3,000 0.010 1.9 0.10 3,500 0.010 2.7 0.05 3,000 0.009 1.9** 0.10 3,500 0.009 2.9 0.05 3,000 0.009 1.9** 0.10 3,500 0.009 2.9 0.10 3,500 0.009 2.9 0.05 3,000 0.013 1.9 0.10 2,100 0.015 1.1 0.05 3,000 0.010 1.4 0.05 3,000 0.013 1.9 0.05 3,000 0.009 1.9 0.05 3,000 0.010 1.9 0.05 3,000 0.010 1.9 0.05 3,000 0.010 1.9 0.05 3,000 0.010 1.9 0.10 3,500 0.010 2.7 0.05 3,000 0.009 1.9** 0.10 3,500 0.009 2.9 0.05 3,000 0.009 1.9** 0.10 3,500 0.009 2.9 0.10 3,500 0.009 2.9 0.10 3,500 0.009 2.9 0.05 3,000 0.015 1.9 0.05 2,500 0.018 1.9 0.05 2,500 0.018 1.9 0.10 3,000 0.013 2.7 0.05 2,500 0.018 1.9 0.10 2,500 0.018 2.7 0.10 2,500 0.018 2.7 0.10 1,600 0.030 1.9 0.10 1,800 0.025 1.9 *See note regarding DF in characteristics table (Moisture Resistance). **height dimension tolerance ±0.2mm Tan δ www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series PART NUMBERING SYSTEM NPC 101 M 6.3 D7 X A TR 500 F Series RoHS Compliant Optional 500 piece reel qty Tape & Reel Packaging Denotes +260°C Peak Reflow Performance Code (see Standard Products & Specifications Tables) Case Size Working Voltage (Vdc) Tolerance Code M=20%, K=10% Capacitance Code in μF, first 2 digits are significant, third digits no. of zeros DIMENSIONS (mm) Case Code D1 D5 D6 D7 D8 L ±0.2 W ±0.2 7.3 4.3 H ±0.1 1.4 1.1 1.9* 2.7 2.9 W1 ±0.1 S ±0.2 2.4 1.2 TERMINATION MATERIAL: Au: 0.003 ~ 0.014μm Pd: 0.02 ~ 0.07μm Ni: 0.5 ~ 2.0μm Cu: 100 ±8μm *D6 - See Standard Products & Specifications Tables for height tolerance. Ni: 0.5 ~ 2.0μm Pd: 0.02 ~ 0.07μm Au: 0.003 ~ 0.014μm H S W1 L W VOLTAGE CODES Anode Polarity Indicator 220 d58 + Capacitance Value Lot Number Voltage 2.0VDC 2.5VDC 4.0VDC 6.3VDC 8.0VDC 10VDC W1 Voltage Code RECOMMENDED LAND PATTERNS (mm) a 2.4 b 2.9 RECOMMENDED REFLOW SOLDERING PROFILE c 3.7 COMPONENT SURFACE TEMP. (oC) Case Code D1, D5, D6, D7, D8 B A C Code d e g j k A A Peak Temperature 260°C Max. for 10 sec. 260 250 230 NATURAL COOLING 200 160 100 Time Above 230°C 40 sec. max. Pre-Heat 160oC ~ 180°C 30 sec. max. 120 Sec. Max. 50 TIME (SECONDS) APPLICATION NOTES: 1. NPC Series cannot be used in coupling, time-constant or other circuits that are greatly affected by leakage current. 2. NPC parts are polarized so be sure to verify component orientation when mounting components. 3. Do not apply over voltage exceeding the rated voltage. 4. Do not apply ripple current over the specified maximum ripple current rating. NIC COMPONENTS CORP. www.niccomp.com NOTES ON REFLOW SOLDERING: 1. SAC alloy (+217°C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [[email protected]] www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series REEL TAPE DIMENSIONS (mm) Case Reel A ±2.0 B ±1.0 C ±0.2 W ±1.0 t ±0.5 Code Quantity 3,500 D1, D5, D6 330 80 13 13.5 2.0 500* D7, D8 2,000 *See part number system for details on designating reel quantity TAPE DIMENSIONS (mm) Case A ±0.1 B ±0.2 Code D1 D5 4.50 D6 7.70 D7 D8 D ±0.05 12.0 E ±0.1 5.5 F ±0.1 1.75 G ±0.05 8.0 2.0 H ±0.1 4.0 J -0/+0.1 K ±0.1 t ±0.05 1.5 1.6 1.5 2.2 2.9 3.1 0.3 J G H E t C ±0.3 + + 220 d58 + 220 d58 A B 220 d58 K B C D C F Anode W A t PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capactitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com