Surface Mount Bandpass Filter CBP-1400E+ 50Ω 1320 to 1480 MHz The Big Deal • Low-profile shielded package • Low passband Insertion Loss • Excellent Rejection CASE STYLE: LW1611 Product Overview CBP-1400E+ is a ceramic-coaxial-resonator based bandpass filter in a shielded package (size of 0.638" x 0.434" x 0.105") fabricated using SMT technology. This filter offers outstanding close in rejection, low insertion loss and high power handling for use in broadband, fixed wireless, image rejection and point-to-point radio. In addition, this model uses low profile resonators which gives very good size advantage. Key Features Feature Advantages High Selectivity The CBP-1400E+ filter incorporates High-Q ceramic resonators that enables sharp rejection near passband. Low Passband VSWR This filter maintains typical VSWR over a wide passband frequency range making this filter easier to integrate into receiver and transmitter RF chains with less concerns for in band frequency ripple. Rugged construction The CBP-1400E+ has been qualified over wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter CBP-1400E+ 50Ω 1320 to 1480 MHz CASE STYLE: LW1611 Features • Low Insertion loss • Minimal Insertion loss variation over operating temperature • Low-profile shielded package Electrical Specifications at 25°C Parameter Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR Pass Band Applications Stop Band, Lower • Wireless medical telemetly • Satellite digital audio broad casting • Aeronautical radio navigation Stop Band, Upper F# Frequency (MHz) Min. Typ. Max. Unit — F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 — 1320-1480 1320-1480 DC-1150 DC-1150 1600-2400 1600-2400 — — — 20 — 20 — 1400 1.7 1.5 42 36 31 20 — 3 2.3 MHz dB :1 dB :1 dB :1 — — — — Maximum Ratings Functional Schematic RF IN RF OUT Operating Temperature Storage Temperature RF Power Input* -40°C to 85°C -55°C to 100°C 12.6W max. at 25°C * Derate linearly to 6.5W at 85°C Permanent damage may occur if any of these limits are exceeded. Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) DC Insertion Loss (dB) VSWR (:1) Frequency (MHz) 1 99.11 1737.18 1320 6.30 800 66.14 69.49 1330 6.06 1150 46.82 40.41 1340 5.86 1160 43.30 38.61 1350 5.69 1180 36.06 32.18 1360 5.55 1200 28.23 24.83 1370 5.43 1220 19.30 15.67 1380 5.36 1240 9.28 5.85 1390 5.33 1320 1.56 1.07 1395 5.33 1400 1.41 1.27 1400 5.34 1480 1.58 1.02 1405 5.36 1530 5.42 3.36 1410 5.39 1540 9.03 6.28 1420 5.45 1550 13.22 10.37 1425 5.48 1575 23.49 20.70 1430 5.52 1600 32.78 28.49 1440 5.59 1610 36.45 31.03 1450 5.71 1650 54.03 39.49 1460 5.88 2000 54.44 59.91 1470 6.14 2400 60.59 54.29 1480 6.49 CBP-1400E+ INSERTION LOSS (Fullband) CBP-1400E+ INSERTION LOSS (Passband) 0 20 INSERTION LOSS (dB) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications INSERTION LOSS (dB) 0 +RoHS Compliant Group Delay (nsec) 40 60 80 100 120 0 400 800 1200 1600 FREQUENCY (MHz) 2000 10 1.2 20 1.6 1320 30 1200 2400 1.4 1300 1480 1400 1500 FREQUENCY (MHz) 1600 CBP-1400E+ GROUP DELAY CBP-1400E+ VSWR 6.6 GROUP DELAY (ns) 1000 VSWR 100 1.4 10 1.2 1.0 1320 1 1400 0 1400 400 6.2 6.0 5.8 5.6 5.4 1480 800 6.4 1200 1600 2000 2400 5.2 1320 1360 FREQUENCY (MHz) 1400 FREQUENCY (MHz) 1440 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 1480 REV.A M151121 CBP-1400E+ EDU1470/2 URJ 150515 Page 2 of 3 CBP-1400E+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND 11 2,3,4,5,6,7,8,9,10,12,13,14,15,16 Demo Board MCL P/N: TB-611+ Suggested PCB Layout (PL-338) Outline Dimensions ( inch mm ) A .434 11.02 B .638 16.21 C .120 3.05 N .109 2.77 P .090 2.29 Q .085 2.16 D .060 1.52 E .030 0.76 F .100 2.54 G .119 3.02 H .095 2.41 J .129 3.28 K .110 2.79 L .678 17.22 M .474 12.04 wt, grams 0.8 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3