Lumileds MXC7-PW65-0000 High flux in a 3535 package with full range of ccts and cri Datasheet

ILLUMINATION
For NEW designs consider
this replacement product:
N
O O
R L
D O
ER N
G
A E
B R
LE
• LUXEON 3030 2D
LUXEON 3535 2D
High flux in a 3535 package with full
range of CCTs and CRIs
LUXEON 3535 2D is a mid power LED delivering optimized performance
in combination with the Quality of Light needed for distributed light
source applications. In addition, the product comes in specified
correlated color temperature and color rendering combinations for
high brightness systems while improving system lm/$. LUXEON 3535 2D
emitters deliver the efficacy and reliability required by the indoor and
outdoor illumination markets.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
Industry standard package enables drop-in replacement for existing
3535 packages
Architectural
High efficacy for sustainable designs
Downlights
80CRI minimum and R9>0 for quality indoor lighting
High Bay & Low Bay
1/6th and 1/9th ANSI color binning delivers tight color control
Indoor Area Lighting
Full range of CCTs and CRIs
Lamps
Outdoor
Specialty Lighting
Spotlights
RoHS
COMPLIANT
DS204 LUXEON 3535 2D Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
N
O O
R L
D O
ER N
G
A E
B R
LE
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembly Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Relative Spectral Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Luminous Efficacy Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
i
General Information
Part Number Nomenclature
N
O O
R L
D O
ER N
G
A E
B R
LE
LUXEON Mid-Power Illumination emitters are tested and binned at 100mA, with current pulse duration of 20ms.
All characteristic charts where the thermal pad is kept at constant temperature (25°C typically) are measured with
current pulse duration of 20ms. Under these conditions, junction temperature and thermal pad temperature are
the same.
The part number designations for the MXCA series is explained as follows:
MXCA-BCDE-IJKL
Where:
A
—
designates minimum CRI performance (value 7 = 70 minimum and 8 = 80 minimum)
B
—
designates radiation pattern (value P = Lambertian)
C
—
designates color (value W = White)
D, E —
designates nominal ANSI CCT (for example, 30 = 3000K and 40 = 4000K)
I, J, K & L — additional part number designation
Therefore products in this series with minimum CRI value of 80, CCT of 4000K will have the part numbering scheme:
MXC8-PW40-0000
Average Lumen Maintenance Characteristics
Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial
light output remaining after a specified period of time. LM-80 test reports are available upon request.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON
Mid-Power LEDs are compliant to the European Union directives on the restriction of hazardous substances in
electronic equipment, namely REACH and the RoHS directive. Lumileds will not intentionally add the following
restricted materials to these LEDs: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB)
or polybrominated diphenyl ethers (PBDE).
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
2
Product Selection
Product Selection for Mid-Power LEDs
Solder Pad Temperature = 25°C, Test Current = 100mA
Table 1.
Part
Number
Minimum CRI
Typical CRI
R9
Min Luminous
Flux (lm)
ɸV
Typ Luminous
Flux (lm)
ɸV
N
O O
R L
D O
ER N
G
A E
B R
LE
Nominal
CCT
2700K
3000K
3500K
4000K
5000K
5700K
6500K
MXC8-PW27-0000
80
82
R9>0
55
80
MXC9-PW27-1111
85
90
R9>50
50
68
MXC9-PW27-0000
90
92
R9>50
50
68
MXC8-PW30-0000
80
82
R9>0
55
80
MXC9-PW30-1111
85
90
R9>50
50
68
MXC9-PW30-0000
90
92
R9>50
50
68
MXC8-PW35-0000
80
82
R9>0
55
80
MXC9-PW35-0000
85
90
typ 50
50
68
MXC7-PW40-0000
70
72
-
70
77
MXC8-PW40-0000
80
82
R>0
60
82
MXC9-PW40-0000
85
90
typ 50
55
65
MXC7-PW50-0000
70
72
-
70
77
MXC8-PW50-0000
80
82
R>0
60
83
MXC7-PW57-0000
70
72
-
70
77
MXC8-PW57-0000
80
82
R>0
60
73
MXC7-PW65-0000
70
72
-
70
77
MXC8-PW65-0000
80
82
R9>0
60
81
MXC9-PW65-0000
86
90
R9>46
60
76
Note for Table 1:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux and ±2 on CRI measurements.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Optical Characteristics of Mid-Power LEDs
Solder Pad Temperature = 25°C, Test Current = 100mA
Table 2.
Minimum
Typical
Maximum
Typical Total
Included Angle [1]
(degrees) u0.90V
2550K
2700K
2850K
150
3000K
2850K
3000K
3200K
150
115
3500K
3200K
3500K
3750K
150
115
4000K
3750K
4000K
4250K
150
115
5000K
4700K
5000K
5300K
150
115
5700K
5300K
5700K
6000K
150
115
6500K
6000K
6500K
7000K
150
115
Color Temperature CCT
Typical
Viewing Angle [2]
(degrees) 2u ½
115
N
O O
R L
D O
ER N
G
A E
B R
LE
Nominal
CCT
2700K
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
Electrical Characteristics
Electrical Characteristics of Mid-Power LEDs
Thermal Pad Temperature = 25°C, Test Current = 100mA
Table 3.
Minimum
Typical
Maximum
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
DVF / DTJ
5.6
6.1
6.8
-2.0 to -4.0
Forward Voltage Vf [1] (V)
Part Number
MXCx-PWxx-0000
Typical Thermal
Resistance
Junction to Solder Pad
(°C/W)
Ru J-C
18
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.10V on forward voltage measurements.
2. Measured at Tj between 25°C and 110°C.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
4
Absolute Maximum Ratings
Table 4.
Parameter
Maximum Performance
DC Forward Current (mA) [1]
200
Peak Pulsed Forward Current (mA)
240
ESD Sensitivity
Class 2 HBM per ANSI/ESDA/JEDEC JS-001-2012
Pass 400V MM per JEDEC JESD22-A115C
125°C
Operating Case Temperature at 100 mA
-40°C - 105°C
N
O O
R L
D O
ER N
G
A E
B R
LE
LED Junction Temperature [2]
Storage Temperature
-40°C - 105°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vr)
-5V
[3], [4]
Notes for Table 4:
1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 200mA, and the maximum of the current waveform is lower than 200mA.
2. Proper current derating must be observed to maintain junction temperature below the maximum.
3. LUXEON Mid-Power LEDs are not designed to be driven in reverse bias.
4. At maximum reverse current of 10µA.
JEDEC Moisture Sensitivity
Table 5.
2
Soak Requirements
Standard
Floor Life
Level
Time
Conditions
Time
Conditions
1 year
[ 30°C /
60% RH
168 Hrs.
+ 5 / - 0 Hrs.
[85°C /
60% RH
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
5
Reflow Soldering Characteristics
300
Tp: 260°C
260°C +0/-5°C
250
Ramp-Up Rate, 3°C/sec. max.
255°C +5/-0°C
TL: 217°C
Tsmax : 200°C
tp: 10-30sec. 30sec max.
N
O O
R L
D O
ER N
G
A E
B R
LE
Temperature ( C)
200
Tsmin: 150°C
150
ts : 60-120sec.
tL: 60-150 sec,max
100
50
0
0
50
100
150
200
250
300
Time (seconds)
Temperature profile for Table 6.
Table 6. Reflow Profile in Accordance with J-Std-020D.
Profile Feature
Lead Free Assembly
Preheat/Soak :
Temperature Min (Tsmin )
Temperature Max (Tsmax )
Maximum Time (ts ) from Tsmin to Tsmax
150°C
200°C
120 seconds
Ramp-up Rate (TL to Tp )
3°C / second
Liquidous Temperature (TL )
217°C
Maximum Time (tL ) Maintained above TL
150 seconds
Maximum Peak Package Body Temperature (Tp )
260°C
Time (tp ) within 5°C of the specified temperature (Tc )
10-30 seconds
Maximum Ramp-Down Rate (Tp to TL )
6°C / second
Maximum Time 25°C to Peak Temperature
8 minutes
Note for Table 6:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
6
Mechanical Dimensions
2.6
Cathode
Anode
N
O O
R L
D O
ER N
G
A E
B R
LE
3.50±0.15
2.7
3.40±0.15
Part Mark
Cathode
1.9
0.8
3.7 MAX
0.3
0.8
Figure 1. Package outline drawing.
Notes for Figure 1:
1. All dimensions are in millimeters.
2. Tolerance: ±0.10mm.
3. Materials
• Lead Frame: Copper Alloy with Silver Plating
• Package Body: High Temperature Thermal Plastic
• Encapsulant: Silicone Resin
• Solder Lead Finish: Sn-Sn Plating
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
7
N
O O
R L
D O
ER N
G
A E
B R
LE
Solder Pad Design
Figure 2. Solder pad layout.
Notes for Figure 2:
1. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB).
2. Application Brief AB204 (to be released) provides extensive details for this layout. In addition, the .dwg files are available at www.lumileds.com.
Assembly Precautions
The LUXEON emitter package contains a silicone overcoat to protect the LED chip and extract the maximum amount
of light. As with most silicones used in LED optics, care must be taken to prevent any incompatible chemicals from
directly or indirectly reacting with the silicone.
The silicone overcoat used in the LUXEON emitter is gas permeable. Consequently, oxygen and volatile organic
compound (VOC) gas molecules can diffuse into the silicone overcoat. VOCs may originate from adhesives, solder
fluxes, conformal coating materials, potting materials and even some of the inks that are used to print the PCBs.
Some VOCs and chemicals react with silicone and produce discoloration and surface damage. Other VOCs do not
chemically react with the silicone material directly but diffuse into the silicone and oxidize during the presence of
heat or light. Regardless of the physical mechanism, both cases may affect the total LED light output. Since silicone
permeability increases with temperature, more VOCs may diffuse into and/or evaporate out from the silicone.
Please refer to AB203 for more details on VOCs and other incompatible chemicals.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
8
Relative Spectral Distribution
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Intensity vs. Wavelength,
MXC7-PWxx
Figure 3a. Typical color spectrum of MXC7-PWxx emitter, integrated measurement
at solder pad temperature = 25°C, forward current = 100mA.
Relative Intensity vs. Wavelength,
MXC8-PWxx
Figure 3b. Typical color spectrum of MXC8-PWxx emitter, integrated measurement
at solder pad temperature = 25°C, forward current = 100mA.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
9
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Intensity vs. Wavelength,
MXC9-PWxx
Figure 3c. Typical color spectrum of MXC9-PWxx emitter, integrated measurement
at solder pad temperature = 25°C, forward current = 100mA.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
10
Light Output Characteristics
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Flux over Temperature
MXCx-PWxx
Figure 4. Typical relative light output vs. solder pad temperature, forward current = 100mA.
Relative Flux vs. Forward Current
MXCx-PWxx
Figure 5. Typical relative luminous flux vs. forward current, solder pad temperature = 25°C.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
11
Luminous Efficacy Characteristics
N
O O
R L
D O
ER N
G
A E
B R
LE
Relative Luminous Efficacy vs. Forward Current
MXCx-PWxx
Figure 6. Typical emitter efficacy versus forward current, solder pad temperature = 25°C.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
12
Forward Current Characteristics
N
O O
R L
D O
ER N
G
A E
B R
LE
Forward Current vs. Forward Voltage
MXCx-PWxx
Figure 7. Typical forward current vs. forward voltage, solder pad temperature = 25°C.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
13
Typical Radiation Patterns
N
O O
R L
D O
ER N
G
A E
B R
LE
Radiation Pattern in Cartesian Coordinate System
Figure 8. Typical representative spatial radiation pattern.
Radiation Pattern in Polar Coordinate System
Figure 9. Typical polar plot of radiation pattern.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
14
Emitter Pocket Tape Packaging
Ø1.50
4.0 ±0.1
2.0 ±0.05
2.2 ±0.1
1.75 ± 0.1
Anode Side
3.85 ± 0.1
8.0 ±0.1
5.5 ±0.1
12 +0.3/-0.1
N
O O
R L
D O
ER N
G
A E
B R
LE
Anode Mark
Ø1.50 ±0.25/-0.0
0.29 ±0.02
3.75 ±0.1
Figure 10. Emitter pocket tape packaging.
Notes for Figure 10:
1. All dimensions are in millimeters
2. Empty component pockets sealed with top cover tape
3. The maximum number of consecutive missing LEDs is two.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
15
Emitter Reel Packaging
329
100 +/-0.5
13,1 +0,5
-0,2
N
O O
R L
D O
ER N
G
A E
B R
LE
18.4 (max, measure at hub)
1.5
n
mi
+2
12,4-0
Figure 11. Emitter reel packaging.
Notes for Figure 11:
• All dimentions are in millimeters.
• Empty component pockets sealed with top cover tape.
• 329 mm reel - 5000 pieces per reel.
• Minimum packing quantity is 5000 pieces.
• The maximum number of consecutive missing LEDs is two.
• In accordance with EIA-481-1-B specification.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
16
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward
voltage (Vf ).
N
O O
R L
D O
ER N
G
A E
B R
LE
Decoding Product Bin Labeling
LUXEON Mid-Power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using
these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K and 6500K emitters are labeled with a four or five digit
alphanumeric CAT code following the format below.
A B C D or A x B C D
Where:
A=
Flux bin (D, etc.)
x=
Lumileds internal use
B and C = Color bin (For example 51, 52, 53, 54, 55, 56 or 5D, 5E, 8F, 8G, 8H, 8J, 8K, 8L, 8M)
D=
Vf bin
Luminous Flux Bins
Table 7 lists the standard photometric luminous flux bins for LUXEON Mid-Power emitters (tested and binned
at 100mA).
Although several bins are outlined, product availability in a particular bin varies by production run and by product
performance.
Not all bins are available in all colors.
Table 7. Flux Bins
Bin Code
Minimum Photometric Flux
(lm)
Maximum Photometric Flux
(lm)
A
55
60
B
60
65
C
65
70
D
70
75
E
75
80
F
80
85
G
85
90
H
90
95
J
95
100
K
100
105
L
105
110
M
110
115
N
115
120
Tested and binned at 25°C, If=100mA. Tester tolerance: ±7.5%.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
17
Forward Voltage Bins
Table 8. Vf Bins
Bin Code
Minimum Forward Voltage
(V)
Maximum Forward Voltage
(V)
F
5.6
5.8
G
5.8
6
6
6.2
J
6.2
6.4
K
6.4
6.6
N
O O
R L
D O
ER N
G
A E
B R
LE
H
L
6.6
6.8
Tested and binned at 25°C, If = 100mA. Tester tolerance: ±0.10V.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
18
Color Bin Structure
MXCx-PW27-xxxx 1/6th Color Bin Structure
0.450
N
O O
R L
D O
ER N
G
A E
B R
LE
0.440
0.430
81
0.420
83
85
y
2700K
0.410
0.400
82
84
86
2580
0.390
2870K
0.380
0.370
0.430
0.435
0.440
0.445
0.450
0.455
0.460
0.465
0.470
0.475
0.480
0.485
0.490
x
Figure 12. ANSI 2700K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 9.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW27-xxxx Emitter
Bin Code
x
y
Bin Code
x
y
81
0.4625
0.4729
0.4813
0.4703
0.4113
0.4299
0.4319
0.4132
84
0.4446
0.4546
0.4625
0.4520
0.3910
0.4095
0.4113
0.3927
82
0.4520
0.4625
0.4703
0.4593
0.3927
0.4113
0.4132
0.3944
85
0.4468
0.4562
0.4646
0.4546
0.4077
0.4260
0.4280
0.4095
83
0.4546
0.4646
0.4729
0.4625
0.4095
0.4280
0.4299
0.4113
86
0.4373
0.4468
0.4546
0.4446
0.3893
0.4077
0.4095
0.3910
Notes for Table 9:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
19
Color Bin Structure, Continued
MXCx-PW27-xxxx 1/9th Color Bin Structure
0.450
N
O O
R L
D O
ER N
G
A E
B R
LE
0.440
0.430
8J
CIE 1931y
0.420
8F
8E
0.410
8D
8G
8H
0.400
8L
8M
0.390
8K
2580K
2870K
0.380
0.370
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CIE 1931 x
Figure 13. ANSI 2700K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 10.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.70°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.70°
Notes for Table 10:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
20
Color Bin Structure, Continued
MXCx-PW30-xxxxx 1/6th Color Bin Structure
0.445
N
O O
R L
D O
ER N
G
A E
B R
LE
0.435
0.425
71
0.415
73
75
y
0.405
0.395
3000K
72
74
76
2870K
0.385
3200K
0.375
0.365
0.405
0.410
0.415
0.420
0.425
0.430
0.435
x
0.440
0.445
0.450
0.455
0.460
0.465
Figure 14. ANSI 3000K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 11.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW30-xxxx Emitter
Bin Code
x
y
Bin Code
x
y
71
0.4386
0.4474
0.4562
0.4468
0.4048
0.4228
0.4260
0.4077
74
0.4222
0.4305
0.4386
0.4298
0.3840
0.4019
0.4048
0.3867
72
0.4298
0.4386
0.4468
0.4373
0.3867
0.4048
0.4077
0.3893
75
0.4223
0.4299
0.4387
0.4305
0.3990
0.4165
0.4197
0.4019
73
0.4305
0.4387
0.4474
0.4386
0.4019
0.4197
0.4228
0.4048
76
0.4147
0.4223
0.4305
0.4222
0.3814
0.3990
0.4019
0.3840
Notes for Table 11:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
21
Color Bin Structure, Continued
MXCx-PW30-xxxxx 1/9th Color Bin Structure
0.445
N
O O
R L
D O
ER N
G
A E
B R
LE
0.435
0.425
7K
CIE 1931 y
0.415
7J
7E
7F
0.405
7D
0.395
7M
7H
7L
2870K
0.385
0.375
7G
3200K
0.365
0.4050.410 0.415 0.420 0.4250.430 0.435 0.4400.445 0.450 0.455 0.4600.465
CIE 1931 x
Figure 15. ANSI 3000K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 12.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.403)
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.403)
0.00834
0.00408
53.22°
0.01390
0.00680
53.22°
Notes for Table 12:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
22
Color Bin Structure, Continued
MXCx-PW35-xxxxx 1/6th Color Bin Structure
0.430
N
O O
R L
D O
ER N
G
A E
B R
LE
0 420
0.420
0.410
61
63
0.400
y
65
0.390
3500K
62
64
0.380
3250K
66
0.370
3750K
0.360
0.380
0.385
0.390
0.395
0.400
0.405
0.410
0.415
0.420
0.425
0.430
0.435
0.440
x
Figure 16. ANSI 3500K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 13.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW35-xxxx Emitter
Bin Code
x
y
Bin Code
x
y
61
0.4130
0.4198
0.4299
0.4223
0.3944
0.4115
0.4165
0.3990
64
0.3975
0.4036
0.4130
0.4061
0.3731
0.3898
0.3944
0.3773
62
0.4061
0.4130
0.4223
0.4147
0.3773
0.3944
0.3990
0.3814
65
0.3943
0.3996
0.4097
0.4036
0.3853
0.4015
0.4065
0.3898
63
0.4036
0.4097
0.4198
0.4130
0.3898
0.4065
0.4115
0.3944
66
0.3889
0.3943
0.4036
0.3975
0.3690
0.3853
0.3898
0.3731
Notes for Table 13:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
23
Color Bin Structure, Continued
MXCx-PW35-xxxxx 1/9th Color Bin Structure
0.420
N
O O
R L
D O
ER N
G
A E
B R
LE
0.410
6K
0.400
6E
y
6F
6J
6D
0.390
6G
6H
0.380
6L
6M
3250K
0.370
3750K
0.360
0.380
0.390
0.400
0.410
0.420
0.430
0.440
x
Figure 17. ANSI 3500K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 14.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
53.22°
0.01545
0.00690
53.22°
Notes for Table 14:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
24
Color Bin Structure, Continued
MXCx-PW40-xxxx 1/6th Color Bin Structure
0.420
N
O O
R L
D O
ER N
G
A E
B R
LE
0.410
0.400
51
0.390
53
y
55
0.380
4000K
52
54
0.370
3750K
56
0.360
4250K
0.350
0.340
0.360
0.365
0.370
0.375
0.380
0.385
0.390
0.395
0.400
0.405
0.410
x
Figure 18. ANSI 4000K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 15.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW40-xxxxx Emitter
Bin Code
x
y
Bin Code
x
y
51
0.3869
0.3916
0.4006
0.3952
0.3829
0.3987
0.4044
0.3880
54
0.3746
0.3786
0.3869
0.3822
0.3624
0.3777
0.3829
0.3670
52
0.3822
0.3869
0.3952
0.3898
0.3670
0.3829
0.3880
0.3716
55
0.3703
0.3736
0.3826
0.3786
0.3726
0.3874
0.3931
0.3777
53
0.3786
0.3826
0.3916
0.3869
0.3777
0.3931
0.3987
0.3829
56
0.3670
0.3703
0.3786
0.3746
0.3578
0.3726
0.3777
0.3624
Notes for Table 15:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
25
Color Bin Structure, Continued
MXCx-PW40-xxxx 1/9th Color Bin Structure
0.420
N
O O
R L
D O
ER N
G
A E
B R
LE
0.410
0.400
CIE 1931 y
0.390
5K
5F
5J
0.380
5E
5D
5G
0.370
5L
5H
3750K
5M
0.360
4250K
0.350
0.340
0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410
CIE 1931 x
Figure 19. ANSI 4000K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 16.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.72°
0.01565
0.00670
53.72°
Notes for Table 16:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
26
Color Bin Structure, Continued
MXCx-PW50-xxxx 1/6th Color Bin Structure
0.390
N
O O
R L
D O
ER N
G
A E
B R
LE
0 380
0.380
0.370
31
33
0.360
35
y
5000K
32
0.350
34
4750K
36
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
0.350
0.355
0.360
0.365
x
Figure 20. ANSI 5000K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 17.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW50-xxxx Emitter
Bin Code
x
y
Bin Code
x
y
31
0.3479
0.3493
0.3551
0.3533
0.3580
0.3712
0.3760
0.3624
34
0.3416
0.3425
0.3479
0.3465
0.3408
0.3536
0.3580
0.3448
32
0.3465
0.3479
0.3533
0.3515
0.3448
0.3580
0.3624
0.3487
35
0.3371
0.3376
0.3434
0.3425
0.3493
0.3616
0.3664
0.3536
33
0.3425
0.3434
0.3493
0.3479
0.3536
0.3664
0.3712
0.3580
36
0.3366
0.3371
0.3425
0.3416
0.3369
0.3493
0.3536
0.3408
Notes for Table 17:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
27
Color Bin Structure, Continued
MXCx-PW50-xxxx 1/9th Color Bin Structure
0.390
N
O O
R L
D O
ER N
G
A E
B R
LE
0.380
3K
0.370
3F
3J
CIE 1931 y
0.360
3E
3G
3D
0.350
3L
3H
4750K
3M
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
x
0.350
0.355
0.360
0.365
Figure 21. ANSI 5000K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 18.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.62°
0.01370
0.00590
59.62°
Notes for Table 18:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
28
Color Bin Structure, Continued
MXCx-PW57-xxxxx 1/6th Color Bin Structure
0.370
N
O O
R L
D O
ER N
G
A E
B R
LE
0.360
21
0.350
23
25
y
0.340
5700K
22
24
5250K
26
0.330
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
x
0.335
0.340
0.345
0.350
Figure 22. ANSI 5700K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 19.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW57-xxxxx Emitter
Bin Code
x
y
Bin Code
x
y
21
0.3319
0.3320
0.3376
0.3371
0.3446
0.3565
0.3616
0.3493
24
0.3270
0.3267
0.3319
0.3318
0.3285
0.3399
0.3446
0.3327
22
0.3318
0.3319
0.3371
0.3366
0.3327
0.3446
0.3493
0.3369
25
0.3215
0.3207
0.3263
0.3267
0.3353
0.3462
0.3513
0.3399
23
0.3267
0.3263
0.3320
0.3319
0.3399
0.3513
0.3565
0.3446
26
0.3222
0.3215
0.3267
0.3270
0.3243
0.3353
0.3399
0.3285
Notes for Table 19:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
29
Color Bin Structure, Continued
MXCx-PW57-xxxxx 1/9th Color Bin Structure
0.370
N
O O
R L
D O
ER N
G
A E
B R
LE
0.360
2K
0.350
2F
2J
y
2E
0.340
2D
2G
2L
5250K
2H
0.330
2M
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345
0.350
x
Figure 23. ANSI 5700K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 20.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
5700K
Single 3-step MacAdam ellipse
(0.3287, 0.3417)
0.00746
0.00320
59.09°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.09°
Notes for Table 20:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
30
Color Bin Structure, Continued
MXCx-PW65-xxxxx 1/6th Color Bin Structure
0.365
N
O O
R L
D O
ER N
G
A E
B R
LE
0 355
0.355
0.345
11
0.335
13
y
15
6500K
0.325
12
6000K
14
16
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 24. ANSI 6500K 1/6th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 21.
LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW65-xxxxx Emitter
Bin Code
x
y
11
0.3158
0.3146
0.3206
0.3213
0.3317
0.3422
0.3481
0.3371
12
0.3170
0.3158
0.3213
0.3221
0.3212
0.3317
0.3371
0.3261
13
0.3103
0.3087
0.3146
0.3158
0.3263
0.3363
0.3422
0.3317
Bin Code
x
y
14
0.3119
0.3103
0.3158
0.3170
0.3162
0.3263
0.3317
0.3212
15
0.3048
0.3028
0.3087
0.3103
0.3209
0.3304
0.3363
0.3263
16
0.3068
0.3048
0.3103
0.3119
0.3113
0.3209
0.3263
0.3162
Notes for Table 21:
1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
31
Color Bin Structure, Continued
MXCx-PW65-xxxxx 1/9th Color Bin Structure
0.365
N
O O
R L
D O
ER N
G
A E
B R
LE
0.355
0.345
CIE 1931 y
1K
1F
0.335
1J
1E
0.325
1D
1G
1L
6000K
1H
1M
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 25. ANSI 6500K 1/9th color bin structure.
LUXEON Mid-Power Emitters are tested and binned by x,y coordinates.
Table 22.
Nominal
ANSI CCT
Color Space
Target Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse
Rotation Angle
6500K
Single 3-step MacAdam ellipse
(0.3123, 0.3282)
0.00669
0.00285
58.57°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.57°
Notes for Table 22:
1. Tested and binned at 25°C and If = 100mA. Tester tolerance: +/- 0.01 in x and y coordinates.
DS204 LUXEON 3535 2D Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
32
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
N
O O
R L
D O
ER N
G
A E
B R
LE
To learn more about our portfolio of light engines, visit lumileds.com.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS204 LUXEON 3535 2D
Product Datasheet 20160628
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.
Similar pages