Microsemi MV20006 Gaas varactor diodes abrupt junction Datasheet

GaAs Varactor Diodes
Abrupt Junction
®
TM
MV20001 – MV21010
Features
●
High Q Values for Higher Frequency Performance
●
Constant Gamma Design
●
Low Reverse Current
●
Available as Chip or Packaged Diodes
●
Available in Chip-on-Board Packaging
●
Custom Designs Available
Applications
●
VCOs
●
Phase-Locked Oscillators
Description
●
High Q Tunable Filters
●
Phase Shifters
●
Pre-Selectors
Microsemi’s GaAs abrupt junction varactors are
fabricated from epitaxial layers grown at
Microsemi using Chemical Vapor Deposition. The
layers are processed using proprietary techniques
resulting in a high Q factor and very repeatable
tuning curves. The diodes are available in a variety
of microwave ceramic packages or chips for
operation from UHF to millimeter wave
frequencies.
Maximum Ratings
Reverse Voltage
Breakdown Voltage
Forward Current
50 mA @ 25°C
Incident Power
+20 dBm @ 25°C
Operating Temperature
-55°C to +175°C
Storage Temperature
-55°C to +200°C
IMPORTANT: For the most current data, consult our website: www.MICROSEMI.com
Specifications are subject to change. Consult factory for the latest information.
1
The MV20000 Series of products are
supplied with a RoHS complaint Gold finish
.
These devices are ESD sensitive and must be handled using ESD precautions.
Copyright  2008
Rev: 2009-05-11
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 1
GaAs Varactor Diodes
Abrupt Junction
®
TM
MV20001 – MV21010
Specifications @ 25°C
Gamma = 0.5
Part
Number
CT @ 4 V
± 10%
(pF)1, 3, 4
Typ.
CT @ 0 V
CT @ VBR5
Min.
VBR @
10 A (V)
Typ.
Q @ -4 V2
MV20001
0.3
2.4
15
8000
MV20002
0.4
2.6
15
7500
MV20003
0.5
2.8
15
7000
MV20004
0.6
2.9
15
6500
MV20005
0.8
3.0
15
6000
MV20006
1.0
3.1
15
5700
MV20007
1.2
3.2
15
5000
MV20008
1.5
3.3
15
5000
MV20009
1.8
3.4
15
5000
MV20010
2.2
3.4
15
4000
MV21001
0.3
2.8
30
8000
MV21002
0.4
3.1
30
7500
MV21003
0.5
3.4
30
7000
MV21004
0.6
3.6
30
6500
MV21005
0.8
3.8
30
6000
MV21006
1.0
4.0
30
5700
MV21007
1.2
4.2
30
5000
MV21008
1.5
4.3
30
5000
MV21009
1.8
4.5
30
5000
MV21010
2.2
4.6
30
4000
Typical Characteristics
Capacitance is specified at 1 MHz.
Measured by DeLoach Technique and referenced to 50 MHz.
3 Tightened tolerances available upon request.
4 Package capacitance of 0.15 pF is included in the above specification.
5 The capacitance ratio is calculated using CP = 0.15 pF. Ratios will vary
depending upon package selection.
1
2
Copyright  2008
Rev: 2009-05-11
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 2
Similar pages