LITEON LTL-3231ADG Through hole lamp Datasheet

Through Hole Lamp
Product Data Sheet
LTL-3231ADG
Spec No.: DS20-2000-289
Effective Date: 07/25/2000
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Features
* Low power consumption.
* Most suitable for use like level indicator.
* Excellent uniformity of light emittance.
* Long life-solid state reliability.
* I.C. compatible.
Package Dimensions
Part No.
Lens
Source Color
LTL-3231ADG
Green Diffused
Green
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25mm(.010") unless otherwise noted.
3. Protruded resin under flange is 1.0mm(.04") max.
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice.
Part No. : LTL-3231ADG
BNS-OD-C131/A4
Page :
1
of
4
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Absolute Maximum Ratings at TA=25℃
Maximum Rating
Unit
100
mW
120
mA
Continuous Forward Current
30
mA
Derating Linear From 50℃
0.4
mA/℃
5
V
Parameter
Power Dissipation
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Reverse Voltage
Operating Temperature Range
-55℃ to + 100℃
Storage Temperature Range
-55℃ to + 100℃
Lead Soldering Temperature
[1.6mm(.063") From Body]
Part No. : LTL-3231ADG
BNS-OD-C131/A4
260℃ for 5 Seconds
Page :
2
of
4
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Electrical Optical Characteristics at TA=25℃
Parameter
Luminous Intensity
Symbol
Min.
IV
0.1
Typ.
Max.
Unit
mcd
2θ1/2
140
deg
Peak Emission Wavelength
λP
565
nm
Dominant Wavelength
λd
569
nm
Δλ
30
nm
Forward Voltage
VF
2.1
Reverse Current
IR
Capacitance
C
Viewing Angle
Spectral Line Half-Width
2.6
V
100
μA
35
pF
Test Condition
IF = 10mA
Note 1,4
Note 2 (Fig.6)
Measurement
@Peak (Fig.1)
Note 3
IF = 20mA
VR = 5V
VF = 0 , f = 1MHz
Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
(Commission International De L'Eclairage) eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
4. The Iv guarantee should be added ±15% .
Part No. : LTL-3231ADG
BNS-OD-C131/A4
Page :
3
of
4
LITE-ON
ELECTRONICS, INC.
Property of Lite-On Only
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Part No. : LTL-3231ADG
BNS-OD-C131/A4
Page :
4
of
4
Similar pages