Vishay BAS16D-G Small signal fast switching diode Datasheet

BAS16D-G
www.vishay.com
Vishay Semiconductors
Small Signal Fast Switching Diode
FEATURES
• Silicon epitaxial planar diode
• Fast switching diode
• AEC-Q101 qualified
• Base P/N-G3 - green, commercial grade
• Material categorization: 
For definitions of compliance
www.vishay.com/doc?99912 







MECHANICAL DATA
Case: SOD-123
Weight: approx. 9.4 mg
Packaging codes/options:
please
see
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
PARTS TABLE
PART
BAS16D-G
ORDERING CODE
INTERNAL CONSTRUCTION
TYPE MARKING
REMARKS
BAS16D-G3-08 or BAS16D-G3-18
Single diode
AK
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Reverse voltage
Repetitive peak reverse voltage
Forward current (continuous)
SYMBOL
VALUE
UNIT
VR
75
V
VRRM
100
V
IF
250
mA
A
t = 1 μs
IFSM
2
t = 1 ms
IFSM
1
A
t=1s
IFSM
0.5
A
Ptot
350
mW
SYMBOL
VALUE
UNIT
RthJA
375
K/W
Tj
150
°C
(1)
Tstg
- 65 to + 150
°C
Operating temperature range
Top
- 55 to + 150
°C
Non-repetitive peak forward current
Power dissipation (1)
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Thermal resistance junction to ambient air (1)
Maximum junction temperature
Storage temperature range
Note
(1) Valid provided electrodes are kept at ambient temperature
Rev. 1.0, 13-May-13
Document Number: 85410
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAS16D-G
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MAX.
UNIT
IF = 1 mA
VF
0.715
V
IF = 10 mA
VF
0.855
V
IF = 50 mA
VF
1
V
Forward voltage
TYP.
IF = 150 mA
VF
1.25
V
VR = 25 V, Tj = 150 °C
IR
30
μA
Leakage current
VR = 75 V
IR
1
μA
VR = 75 V, Tj = 150 °C
IR
50
μA
VR = 0; f = 1 MHz
CD
2
pF
IF = 10 mA, IR = 10 mA,
iR = 1 mA, RL = 100 
trr
6
ns
Diode capacitance
Reverse recovery time
MIN.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
mW
500
103
Tj = 100 °C
102
400
Ptot
IF (mA)
Tj = 25 °C
10
300
1
200
10- 1
100
10- 2
0
0
1
2
VF (V)
18105
0
100
200 °C
Tamb
18186
Fig. 1 - Forward Characteristics
Fig. 3 - Admissible Power Dissipation vs.
Ambient Temperature
104
Tj = 25 °C
5
10
Tj = 25 °C
1.1
f = 1 kHz
2
f = 1 MHz
3
1.0
CD (VR)
2
102
5
CD (0 V)
Rf (Ω)
5
0.9
0.8
2
10
5
0.7
2
10-2
17438
10-1
1
10
Fig. 2 - Dynamic Forward Resistance vs. Forward Current
Rev. 1.0, 13-May-13
0
102
IF (mA)
17440
2
4
6
8
10
VR (V)
Fig. 4 - Relative Capacitance vs. Reverse Voltage
Document Number: 85410
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAS16D-G
www.vishay.com
Vishay Semiconductors
104
5
2
103
IR (nA)
5
2
102
5
2
10
5
VR = 20 V
2
1
0
100
17441
200
Tj (°C)
Fig. 5 - Leakage Current vs. Junction Temperature
A
100
IFRM
I
5
4
3
2
V = tp/T
IFRM
V=0
10
T = 1/fp
tp
t
0.1
5
4
3
2
T
0.2
1
0.5
5
4
3
2
0.1
18106
10-5
2
5
10-4
2
5
10-3
2
5
10-2
2
5
10-1
2
5
1
2
5
10 s
tp
Fig. 6 - Admissible Repetitive Peak Forward Current vs. Pulse Duration
Rev. 1.0, 13-May-13
Document Number: 85410
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAS16D-G
www.vishay.com
Vishay Semiconductors
0.10 (0.004)
0.15 (0.006)
8°
0.45 (0.018)
0.25 (0.010)
0° to
0.2 (0.008)
1 (0.039)
1.35 (0.053)
0.1 (0.004) max.
PACKAGE DIMENSIONS in millimeters (inches): SOD-123
0.5 (0.020) ref.
Cathode bar
Mounting Pad Layout
2.85 (0.112)
2.55 (0.100)
0.85 (0.033)
2.5 (0.098)
0.85 (0.033)
3.55 (0.140)
1.7 (0.067)
3.85 (0.152)
1.40 (0.055)
0.45 (0.018)
0.65 (0.026)
0.85 (0.033)
Rev. 4 - Date: 24. Sep. 2009
Document no.: S8-V-3910.01-001 (4)
17432
Rev. 1.0, 13-May-13
Document Number: 85410
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Similar pages