ETC2 FN9222SB-2-07HI General performance iec inlet filter Datasheet

IEC Inlet Filters
FN 9222
General Performance IEC Inlet Filter
n
n
n
n
n
n
Rated currents up to 20A
Excellent performance/size ratio
Optional medical versions (B type)
according to IEC/EN 60601-1
Snap-in versions (S and S1 type)
Hot inlet versions (HI type)
Optional overvoltage protection
(Z type)
Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
Approvals by rated current:
High potential test voltage:
Protection category:
Temperature range (operation and storage):
Design corresponding to:
Flammability corresponding to:
Surge pulse protection (optional):
MTBF @ 40°C/230V (Mil-HB-217F):
The FN 9222 IEC inlet filter combines an
Approvals
except HI-types
Typical electrical schematic
250VAC, 50/60Hz
dc to 400Hz
1 to 20A @ 50°C
1 to 10A (ENEC, CQC)
16A (ENEC, CQC) for 16 and 20A types
1 to 20A (UL, CSA)
P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec (1 to 10A types, not Z types)
P –> N 250VAC for 2 sec (all Z types)
P –> N 1100VDC for 2 sec (16 and 20A types, not Z types)
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
(X to XX A, not Z types)
UL 94V-2 or better
2kV, IEC 61000-4-5
≤15A: 3,040,000 hours
≥16A: 2,256,000 hours
Standard, R and B types
Features and benefits
Typical applications
n
Exceptional conducted attenuation
IEC inlet and mains filter with excellent filter
performance, based on chokes with high
attenuation in a small form factor. Choosing
saturation resistance and excellent thermal
the FN 9222 product line brings you the rapid
behavior.
availability of a standard filter associated with
n
Rear/front or snap-in mounting.
the necessary safety acceptances. Standard
n
Wide mounting flanges available.
IEC connector filters are a practical solution
n
Cx
R
2xL
2xCy
N
N‘
PE
PE
P‘
P
Line
Load
Z types
Cx
2xL
2xCy
N
N‘
PE
PE
P‘
P
Line
n
Portable electrical and electronic
equipment
n
Small to medium-sized machines and
household equipment
n
Single-phase power supplies, switch-mode
power supplies
Optional medical versions (B type) comply
n
Test and measurement equipment
helping you to pass EMI system approval in
with the requirements of IEC/EN 60601-1
n
Medical equipment
a short time. A wide selection on amperage
for creepage and clearance, leakage
n
Rack mounting equipment
ratings, output connections, mounting
current and high potential testing.
possibilities and filters for medical applications
n
12 and 15A types with hot inlet available.
are designed to offer you the desired solution.
n
Optional surge pulse protection.
n
Different output connections offering
maximum flexibility for assembly.
n
Custom-specific versions are available on
request.
Load
> Components > FN 9222
Filter selection table
Filter
Rated current
@ 50°C (25°C)
Leakage current*
@ 250VAC/50Hz
Inductance
L
FN 9222x-1-..
FN 9222x-3-..
FN 9222x-6-..
FN 9222x-8-..
FN 9222x-10-..
FN 9222x-12-..
FN 9222x-15-..
FN 9222x-12-..HI
FN 9222x-15-..HI
[A]
1 (1.2)
3 (3.5)
6 (7.2)
8 (10.6)
10 (11.6)
12 (12)
15 (15)
12 (12)
15 (15)
[µA]
373
373
373
373
373
373
373
373
373
[mH]
12
2.5
0.78
0.5
0.225
0.11
0.075
0.11
0.075
[µF]
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
FN 9222xR-1-..
FN 9222xR-3-..
FN 9222xR-6-..
FN 9222xR-8-..
FN 9222xR-10-..
FN 9222xR-12-..
FN 9222xR-15-..
FN 9222xR-16-06
FN 9222xR-20-06
FN 9222xR-12-..HI
FN 9222xR-15-..HI
1 (1.2)
3 (3.5)
6 (7.2)
8 (10.6)
10 (11.6)
12 (12)
15 (15)
16 (18.5)
20 (23)
12 (12)
15 (15)
373
373
373
373
373
373
373
373
373
373
373
12
2.5
0.78
0.5
0.225
0.11
0.075
0.54
0.4
0.11
0.075
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.33
0.33
0.1
0.1
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
-06
-07
-06
-07
-06
-07
-06
-07
-06
-07
-06
-07
-06
-07
-06
-06
-06
-07
-06
-07
40
40
40
40
40
40
40
100
100
40
40
FN
FN
FN
FN
FN
FN
FN
FN
FN
FN
FN
1 (1.2)
3 (3.5)
6 (7.2)
8 (10.6)
10 (11.6)
12 (12)
15 (15)
16 (18.5)
20 (23)
12 (12)
15 (15)
2
2
2
2
2
2
2
2
2
2
2
12
2.5
0.78
0.5
0.225
0.11
0.075
0.54
0.4
0.11
0.075
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.33
0.33
0.1
0.1
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
-06
-07
-06
-07
-06
-07
-06
-07
-06
-07
-06
-07
-06
-07
-06
-06
-06
-07
-06
-07
40
40
40
40
40
40
40
100
100
40
40
1 (1.2)
3 (3.5)
6 (7.2)
8 (10.6)
10 (11.6)
12 (12)
15 (15)
373
373
373
373
373
373
373
12
2.5
0.78
0.5
0.225
0.11
0.075
-06
-06
-06
-06
-06
-06
-06
43
43
43
43
43
43
43
9222xB-1-..
9222xB-3-..
9222xB-6-..
9222xB-8-..
9222xB-10-..
9222xB-12-..
9222xB-15-..
9222xB-16-06
9222xB-20-06
9222xB-12-..HI
9222xB-15-..HI
FN 9222UZ-1-06
FN 9222UZ-3-06
FN 9222UZ-6-06
FN 9222UZ-8-06
FN 9222UZ-10-06
FN 9222UZ-12-06
FN 9222UZ-15-06
*
Capacitance
Cx
Cy
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Resistance Output connections
R
[nF]
[kΩ]
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
-06
-07
2.2
2.2
2.2
2.2
2.2
2.2
2.2
Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Weight
[g]
40
40
40
40
40
40
40
40
40
> Components > FN 9222
Product selector
FN 9222xx-yy-..HI-zz
Snap-in range for S version only
Blank:
Snap-in range 0.7 to 1.5mm
20:
Snap-in range 1.5 to 2.2mm
Blank:
Standard IEC inlet type C14 (1 to 15A types), C20 (16 and 20A types)
HI:
Hot IEC inlet type C16 (12 and 15A types only)
06:
Faston 6.3 x 0.8mm (spade/soldering)
07:
Wire leads
1 to 20:
Rated current
Blank:
Standard version
R:
Bleed resistor
B:
Medical version (with bleed resistor and without Y2-capacitor)
Z:
Optional surge pulse protection with additional varistor (MOV)
(Z types have longer housings, only available for FN 9222UZ-yy-06)
Blank:
Standard housing with mounting flanges
U:
Housing with wider mounting flanges
S:
Snap-in version, snapper on vertical side (1 to 15A types only)
S1:
Snap-in version, snapper on horizontal side (1 to 15A types only)
For example: FN 9222-15-07, FN 9222S1B-10-06-20, FN 9222R-12-06HI, FN 9222UZ-15-06
Typical filter attenuation
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
1 and 3A types
6 to 10A types
12 and 15A types
16 and 20A types
> Components > FN 9222
Mechanical data
FN 9222, 1 to 15A types
FN 9222, 16 and 20A types
IEC plug type
C14
B
6.3 x 0.8
6.3 x 0.8
S
A C
IEC plug type
C20
B
S
J
E
A C
J
E
H
H
F
G
I
D
G
FN 9222S
F
I
D
FN 9222S1
B
B
6.3 x 0.8
A
C14
A
J
E
G
F
D
G
F
B
C16
6.3 x 0.8
S
J
E
A C
J
E
C
H
H
F
G
-07 connection style
X
Z
Y
Panel cut out
M
C
C14
6.3 x 0.8
S
P
I
D
FN 9222U
B
N
J
E
I
FN 9222-HI
C14
6.3 x 0.8
R
D
I
G
Installation
T
F
D
I
A
> Components > FN 9222
Dimensions
FN 9222
FN 9222U FN 9222UZ FN 9222S
1 to 8A
10 to 15A 16 and 20A
1 to 8A
10 to 15A
FN 9222S1
1 to 8A
10 to 15A
A
48
48
53
51.85
51.85
29.9
29.9
29.9
29.9
B
22.5
22.5
30
25
25
22.4
22.4
22.4
22.4
C
40 ±0.2
40 ±0.2
42 ±0.2
40 ±0.2
40 ±0.2
D
38.4
38.4
66
38.25
46.8
38.4
38.4
38.4
38.4
E
27.8
27.8
34
27.8
27.8
27.8
27.8
27.8
27.8
F
5.5
5.5
4
5.5
5.5
5.5
5.5
5.5
5.5
G
20.1
20.1
26.5
20.1
20.1
20.1
20.1
20.1
20.1
H
Ø3.3
Ø3.3
Ø3.5
Ø3.3
Ø3.3
I
14
14
14
14.1
14
14
14
14
14
J
13.3
13.3
13.3
13.3
13.3
13.3
13.3
13.3
13.3
M
R≤3
R≤3
R≤3
R≤3
R≤3
R ≤ 1.5
R ≤ 1.5
R ≤ 1.5
R ≤ 1.5
N
21.5
21.5
27
21.5
21.5
20.8
20.8
21.9
21.9
P
28.5
28.5
34.7
28.5
28.5
29.4
29.4
28.5
28.5
R
M3
M3
M3
M3
M3
S
90°
90°
90°
90°
90°
T*
0.7 - 1.5
0.7 - 1.5
0.7 - 1.5
0.7 - 1.5
T*
1.5 - 2.2
1.5 - 2.2
1.5 - 2.2
1.5 - 2.2
X
AWG 18
AWG 16
AWG 18
AWG 16
AWG 18
AWG 16
Y
160
160
160
160
160
160
Z
6
6 6
6
6
6
*
FN 9222-HI
12 and 15A
48
22.5
40 ±0.2
38.4
27.8
5.5
20.1
Ø3.3
14
13.3
R≤3
21.5
28.5
M3
90°
AWG 16
160
6
For selecting the panel thickness, please refer to the filter selection table.
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com
February 2009
Headquarters and
global innovation and
development center
Schaffner Group
Nordstrasse 11
4542 Luterbach
Switzerland
T +41 32 681 66 26
F +41 32 681 66 30
[email protected]
www.schaffner.com
Sales and application centers
China
Schaffner EMC Ltd. Shanghai
Building 11, Lane 1365
East Kangqiao Road
Shanghai 201319
T +86 21 6813 9855
F +86 21 6813 9811
[email protected]
www.schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
[email protected]
Finland
Schaffner Oy
Tynninkuja 7
08700 Lohja
T +358 19 35 72 71
F +358 19 32 66 10
[email protected]
France
Schaffner EMC S.A.S.
112, Quai de Bezons
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
[email protected]
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei, 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
[email protected]
Japan
Schaffner EMC K.K.
Mitsui-Seimei Sangenjaya Bldg. 7F
1-32-12, Kamiuma, Setagaya-ku
Tokyo 154-0011
T +81 3 5712 3650
F +81 3 5712 3651
[email protected]
www.schaffner.jp
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
[email protected]
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
F +41 32 681 66 41
[email protected]
To find your local partner within
Schaffner‘s global network, please go to
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial
Estate
T +65 6377 3283
F +65 6377 3281
[email protected]
© 2011 Schaffner EMC.
Specifications subject to change without
notice. All trademarks recognized.
Spain
Schaffner EMC España
Calle Caléndula 93,
Miniparc III, Edificio E
El Soto de la Moraleja,
Alcobendas
28109 Madrid
T +34 618 176 133
[email protected]
Taiwan
Schaffner EMV Ltd.
6th Floor, No 413
Rui Guang Road
Neihu District
Taipei City 114
T +886 2 87525050
F+886 2 87518086
[email protected]
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muang P.O. Box 14
Lamphun 51000
T +66 53 58 11 04
F +66 53 58 10 19
[email protected]
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane
Wokingham
Berkshire RG41 2PL
T +44 118 9770070
F +44 118 9792969
[email protected]
www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey 08837
T +1 732 225 9533
F +1 732 225 4789
[email protected]
www.schaffner.com/us
www.schaffner.com
May 2011
Schaffner is an ISO-registered company.
Its products are designed and manufactured under the strict quality and environmental requirements of the ISO 9001 and
ISO 14001 standards.
This document has been carefully
checked. However, Schaffner does not
assume any liability for errors or inaccuracies.
Similar pages