ETC2 FR01KC10P-S 10mm dip rotary Datasheet

Series FR01
Toggles
General Specifications
Rockers
Electrical Capacity (Resistive Load)
Pushbuttons
10mm DIP Rotaries
Other Ratings
Switching Rating:
Nonswitching Rating:
Programmable Illuminated PB
Contact Resistance:
100 milliohms maximum; 30 milliohms maximum for contact point
Insulation Resistance:
1,000 megohms minimum @ 250V DC
Dielectric Strength:
250V AC minimum for 1 minute minimum
Mechanical Life:
10,000 detent operations minimum
Electrical Life:
10,000 detent operations minimum
Notes: A detent operation is one actuator position operation or stepping.
A cycle is one 360° rotation. 10,000 detent operations equal 625
cycles for hexadecimal devices or 1,000 cycles for decimal devices.
Nominal Operating Torque:
Metal Shaft: 0.009Nm for decimal devices; 0.011Nm for hexadecimal devices
All other Actuator types: 0.008Nm for decimal devices; 0.01Nm for hexadecimal devices
Contact Timing:
Nonshorting
Slides
Rotaries
Keylocks
Materials & Finishes
G
Actuators:
Bushing :
Outer Case:
Housing & Base:
Movable Contacts:
Stationary Contacts:
Terminals:
Terminal Cover:
Bracket:
Accessories
Indicators
Touch
Tilt
Tactiles
Environmental Data
Supplement
100mA @ 5V DC
100mA @ 50V DC
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Screwdriver and Plastic Shaft - Glass fiber reinforced polyamide (UL94V-0);
Dial - Polyoxymethylene; Metal Shaft - Brass with nickel plating
Brass with nickel plating (for Metal Shaft model)
Glass fiber reinforced PBT (for Metal Shaft model)
Glass fiber reinforced polyamide (UL94V-0)
Copper alloy with gold plating
Phosphor bronze with gold plating
Phosphor bronze with gold plating
Polyamide (Right angle model only)
Phospher bronze with tin plating (for Metal Shaft model)
–25°C through +85°C (–13°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 5 minutes; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Processing
Soldering:
Wave Soldering Recommended. See Profile A in Supplement section.
Note: During Wave Soldering process, set the switch to the following position:
FR01FR10P, FR01FR16P, FR01KR10P, FR01KR16P, FR01SR10P, FR01SR16P,
FR01AR10PB, FR01AR16PB, FR01AR10HB, FR01AR16HB: 0 position;
FR01FC10P, FR01KC10P, FR01FC10H, FR01KC10H,
FR01SC10P, FR01AC10PB, FR01AC10HB: 7 position;
FR01FC16P, FR01KC16P, FR01FC16H, FR01KC16H,
FR01SC16P, FR01AC16PB, FR01AC16HB: F position
Manual Soldering: See Profile A in Supplement section.
Cleaning:
These devices are not process sealed. Hand clean locally using alcohol based solution.
Custom process sealed version available; contact factory.
Standards & Certifications
Flammability Standards:
G4
UL94V-0 rated actuator, housing and base
The FR01 Series rotaries have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended, the results do not produce hazardous energy.
www.nkk.com
Series FR01
10mm DIP Rotaries
Rockers
Toggles
Distinctive Characteristics
Pushbuttons
Compact dimensions and low profile allow high density mounting
and close stacking of PC boards.
Programmable Illuminated PB
Highly visible legends and choice of screwdriver, shaft
or dial actuators with arrow position indication
provide trouble-free code setting. Knob
actuator also available.
Detent mechanism gives crisp,
positive action for accurate
switch setting.
Slides
G
Rotaries
Keylocks
Real or complement code setting
identified by color-keyed actuator.
Tactiles
Crimped terminals ensure secure PC mounting
and prevent dislodging during soldering.
Tilt
Cam activated movable contact and gold contacts assure
contact reliability and continuity.
Indicators
Actual Size
Supplement
Accessories
Contact factory for custom models with .200” (5.08mm) terminal
spacing.
Touch
Surface mount model with screwdriver actuation available and
shown in the surface mount section.
www.nkk.com
G5
Series FR01
Toggles
10mm DIP Rotaries
TYPICAL SWITCH ORDERING EXAMPLE
Pushbuttons
Rockers
FR
Mounting
Programmable Illuminated PB
01
Through-hole
Actuation
Screwdriver
K
Plastic Shaft
S
Dial (for Straight
Terminals only)
*A
Metal Shaft (for
Optional Knobs)
Keylocks
F
16
R
Circuits
S
P
PC Terminals
R
Real Coded
(Orange Actuator)
C
Complement Coded
(Yellow Actuator)
P
Straight
H
Right Angle
Packaging
Stick-Tubes:
FR01F, FR01K, FR01S
50 Pieces/Stick
FR01A
25 Pieces/Stick
S
Color not applicable
to Actuator A
Bracket
Positions
*Must be used with
Bracket
10
Decimal
16
Hexadecimal
No
Code
*B
No Bracket
With Bracket
* For Actuator A only
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
G
FR01KR16P-S
Plastic Shaft
Slides
Rotaries
K
01
Hexadecimal Positions
Real Coded
Tactiles
Packaged in Stick-Tube
Straight PC Terminals
Tilt
MOUNTING
01
Through-hole
Touch
ACTUATION
Indicators
F
Screwdriver
Accessories
Adjusted with
a flat tipped
screwdriver
Supplement
Actuators are fully rotational either clockwise or
counterclockwise.
Actuator Colors: Orange for real coded devices;
Yellow for complement coded devices.
G6
AT4180
Optional Snap-on Knob
Polyamide
Black knob with
transparent flange
(2.1)
.083
(9.6)
.378
(0.8)
.031
(6.7)
.264
(4.0)
.157
(0.8)
.031
(1.1)
.043
Install knob before mounting on PCB for right angle type; it should
not be removed once mounted. When mounting, align slit in knob
with arrowhead on actuator.
www.nkk.com
Series FR01
Toggles
10mm DIP Rotaries
ACTUATION
Rockers
Metal Shaft
Programmable Illuminated PB
Pushbuttons
Knob options
illustrated below
with color choices
Adjusted by hand
or with flat tipped
screwdriver
Actuators are fully rotational and operate either clockwise or counterclockwise.
Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices
Mounting hardware is available if needed for models with Actuator A:
Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section.
AT4103 Small
Color Tipped
AT433
Plain Black
(19.0) Dia
.748
(11.0) Dia
.433
Material:
Polyacetal
Color:
Black
(13.0)
.512
AT4104 Large
Color Tipped
(16.0) Dia
.630
(9.5) Dia
.374
Polyester Base:
Black
Polyamide Tip
Colors:
(9.5)
.374
(14.3)
.563
A, B, C, E, F, G, H
(0.5)
.020
Keylocks
OPTIONAL KNOBS FOR METAL SHAFT
(18.0) Dia
.709
(11.0) Dia
.433
Polyester Base:
Black
(9.5)
.374
(15.8)
.622
Polyamide Tip
Colors:
A, B, C, E, F, G, H
(0.5)
.020
G
(9.5)
.374
(0.5)
.020
A Black
B White
C Red
E Yellow
F Green
G Blue
Tactiles
Knob Orientation: When installed with shaft flat rotated 180° from bushing flat as shown in “Typical Switch Dimensions,”
white line on cap points to Actuator Position 0 noted in truth tables below.
Color Codes:
H Gray
10 Decimal
Tilt
TRUTH TABLES (CIRCUITS & POSITIONS)
Actuator Position
x = ON
Terminal No. (Output)
16 Hexadecimal
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 A B C D E F
1
C Complement Coded
Model Numbers:
FR01FC, FR01KC
FR01SC, FR01AC
Indicators
2
4
8
1
Accessories
Model Numbers:
FR01FR, FR01KR,
FR01SR, FR01AR
2
4
8
Supplement
R Real Coded
Rotaries
Adjusted by hand
or with flat tipped
screwdriver
A
Dial
Slides
S
Plastic Shaft
Touch
K
Terminal numbers are actually on the switch.
Above sequence shown for clockwise rotation.
www.nkk.com
G7
Series FR01
Toggles
10mm DIP Rotaries
TYPICAL SWITCH DIMENSIONS
(0.2)
.008
BCD
Pushbuttons
78
3 45
23
(3.8) Dia
.150
(3.8) Dia
.150
1
(2.1)
.083
(0.2) Typ
.008
(2.54)
.100
(10.0)
.394
Decimal
Hexadecimal
(7.62)
.300
(1.27)
.050
C
1 2 4 8
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
2
4
(2.54) Typ
.100
8
C
(2.54)
.100
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
(1.27)
.050
(3.3)
.130
(0.5) Typ
.020
(2.54) Typ
.100
(3.25)
.128
BCD
78
(10.0)
.394
01
EF 2
(0.2) Typ
.008
(7.62)
.300
3 45
901
23
456
Tactiles
(2.1)
.083
(0.2)
.008
(2.54) Typ
.100
8
4
2
1
Tilt
Decimal
FR01KR16P
CL
1
2
4
8
C
(7.0) (3.8)
.276 .150
(0.5) Typ
.020
(2.54) Typ
.100
(7.62)
.300
C
(3.8)
.150
(10.0)
.394
(10.0)
.394
Touch
(2.54) Typ
.100
8
CL
(3.3)
.130
(1.27)
.050
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
Hexadecimal
Right Angle PC • Plastic Shaft
Accessories
3 45
23
901
FR01KC16H
(10.0)
.394
01
EF 2
(0.2)
.008
89
67 A
(10.0)
.394
Decimal
Hexadecimal
CL
(2.1)
.083
(3.8)
.150
(0.2)
.008
(10.0)
.394
(2.75)
.108
1
BCD
(10.0)
.394
456
78
Indicators
(3.8)
.150
Supplement
4
Straight PC • Plastic Shaft
(10.0)
.394
G8
2
C
1
(10.0)
.394
(0.2)
.008
H
CL
(2.75)
.108
89
67 A
89
67 A
Programmable Illuminated PB
Keylocks
901
Slides
(3.8)
.150
(0.2)
.008
FR01FR10H
P
Hexadecimal
(0.2)
.008
1
(0.5) Typ
.020
BCD
G
Decimal
(10.0)
.394
2
(3.8)
.150
(10.0)
.394
456
4
(3.3)
.130
(3.8) Dia
.150
Right Angle PC • Screwdriver
(10.0)
.394
8
C
(10.0)
.394
78
Rotaries
456
H
(2.54) Typ
.100
(7.62)
.300
3 45
(3.8) Dia
.150
FR01FC10P
01
EF 2
(10.0)
.394
23
(10.0)
.394
901
(0.2) Typ
.008
(2.1)
.083
(0.2)
.008
01
EF 2
Rockers
Straight PC • Screwdriver
89
67 A
P
www.nkk.com
(7.0)
.276
(0.2) Typ
.008
(2.54)
.100
(3.25)
.128
2
4
(2.54) Typ
.100
8
C
C
1 2 4 8
(1.27)
.050
(3.3)
.130
(0.5) Typ
.020
(2.54) Typ
.100
(2.54)
.100
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
Series FR01
Toggles
10mm DIP Rotaries
TYPICAL SWITCH DIMENSIONS
(3.4)
.134
(10.0)
.394
8
(7.62)
.300
4
2
(2.54) Typ
.100
2
4
8
1
(7.62)
.300
C
C
(1.27)
.050
(3.3)
.130
(7.2)
.284
Pushbuttons
1
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
(0.5) Typ
.020
Hexadecimal
FR01SR10P
(0.4) Typ
.016
(2.54) Typ
.100
8
(11.0)
.433
(7.62)
.300
(11.6)
.457
(13.1)
.516
(2.28)
.090
4
2
(6.1)
.240
(0.2) Typ
.008
C
4 8
(7.62)
.300
C
(1.27)
.050
(12.7)
.500
(0.5) Typ
.020
(12.7)
.500
(3.3)
.130
(11.95)
.470
2
1
M6 P0.75
(10.0)
.394
(2.54) Typ
.100
CL
1
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
G
FR01AR10PB
Shown in Position 0 with shaft flat rotated 180° from bushing flat
Right Angle PC • Metal Shaft
C
1 2
(5.5)
.217
(2.28)
.090
(11.6)
.457
(13.1)
.516
1
4 8
(10.0)
.394
(7.62)
.300
(13.9)
.547
(0.2) Typ
.008
(2.54)
.100
(3.3)
.130
(12.7)
.500
2
4
8
(7.62)
.300
C
Flat
(0.6) Typ
.024
(3.03)
.119
(6.1)
.240
(2.54) Typ
.100
CL
Tilt
(11.0)
.433
(0.4) Typ
.016
M6 P0.75
H
(0.5) Typ
.020
(2.54) Typ
.100
Shown in Position 0 with shaft flat rotated 180° from bushing flat
(1.27)
.050
(12.7)
.500
(2.54)
.100
(0.8 ~ 1.0) Dia Typ
.031 ~ .039
Touch
(3.1) Dia
.122
Slides
(0.6) Typ
.024
Flat
Tactiles
(3.1) Dia
.122
P
Keylocks
Straight PC • Metal Shaft
Indicators
Decimal
CL
(2.54) Typ
.100
Programmable Illuminated PB
(9.8) Dia
.386
(2.1)
.083
(0.2) Typ
.008
Rotaries
(10.0)
.394
123 4 5 67
(3.0)
.118
(0.2)
.008
P
Rockers
Straight PC • Dial
Supplement
Accessories
FR01AC16HB
www.nkk.com
G9
Series FR01
Toggles
10mm DIP Rotaries
PACKAGING
Rockers
S
Pushbuttons
FR01F, FR01K & FR01S
Each stick-tube contains 50 switches.
Switches must be ordered in 50-piece increments.
Programmable Illuminated PB
FR01A
Each stick-tube contains 25 switches.
Switches must be ordered in 25-piece increments.
Note: Transport and storage temperatures should
not exceed 50°C (122°F). Store stick tubes on flat
surface.
FR01F with Screwdriver Actuation & Straight PC
Keylocks
Rotaries
Stick-Tube
G
FR01K with Plastic Shaft & Right Angle PC
(16.6)
.654
(15.9)
.626
(15.6)
.614
(540.0)
21.260
(530.0)
20.866
Slides
(16.2)
.638
(14.1)
.555
(12.5)
.492
Tilt
Tactiles
FR01S with Dial Actuation & Straight PC
Touch
FR01A with Metal Shaft & Straight PC
FR01A with Metal Shaft & Right Angle PC
(18.2)
.717
(35.5)
1.398
(33.6)
1.323
Accessories
Indicators
(528.0)
20.787
Supplement
(13.1)
.516
G10
(390.0)
15.354
www.nkk.com
(390.0)
15.354
Notes
www.nkk.com
G11
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
NKK Switches:
FR01KR16H-S FR01FR16H-S FR01KC10H-S FR01KR10H-S FR01KR16P-S FR01KC16P-S FR01FR10H-S
FR01FC16H-S FR01KC16H-S FR01FR10H FR01FR16P FR01FC10H-S FR01KC10H FR01KC10P FR01KC16P
FR01KR10P-S FR01FR10P-S FR01KR10P FR01KR16H FR01KC10P-S FR01KR16P FR01FC16P FR01FC10P
FR01FC16H FR01FC10H FR01FR16P-S FR01FC16P-S FR01FC10P-S FR01AC10PB-W FR01AC10PB-W-S
FR01AR10HB-06XL-S FR01AR10PB-W-S FR01AR16HB-06XL FR01AR16HB-06XL-S FR01AR16HB-06XL-W-S
FR01AR16PB-W-S FR01FC10H-06XL-S FR01FC10P-W-S FR01FC16H-06XL-S FR01FC16P-W-S FR01FR10H06XL-S FR01FR10P-W-S FR01FR16H-06XL-S FR01FR16P-W-S FR01KC10H-06XL-S FR01KC10P-W-S
FR01KC16H-06XL-S FR01KC16P-W-S FR01KR10H-06XL-S FR01KR10P-W-S FR01KR16H-06XL-S FR01KR16PW-S FR01SC10P FR01SC10P-W-S FR01SR10P-W-S FR01SR10P-S FR01SC10P-S FR01SC16P-S
FR01AR10PB-S FR01AR10HB-S FR01AR16PB-S FR01AR16HB-S FR01AC10PB-S FR01AC10HB-S
FR01AC16PB-S FR01AC16HB-S FR01FC10H-06XL FR01FC16P-W FR01FR10H-06XL FR01FR16H-06XL
FR01KC16H-06XL FR01KR10H-06XL FR01SC16P FR01SR10P FR01KR10P-W FR01SR16P-S FR01KR10H06XL-W FR01FR16H-06XL-W FR01SR16P
Similar pages