Vishay M55342K02B10E0MS6T Thick film chip resistors, military/established reliability mil-prf-55342 qualified, type rm Datasheet

RCWPM (Military M/D55342)
Vishay Dale
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
FEATURES
• Fully conforms to the requirements of MIL-PRF-55342
• Established reliability - Verified failure rate; M, P, R, S and
T levels
• Operating temperature range is - 55 °C to + 150 °C
• 100 % Group A screening per MIL-PRF-55342
• Termination Style B - Tin/Lead wraparound over nickel
barrier
• For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s
RCWPM Jumper (Military M32159) data sheet
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE
MODEL
POWER RATING
MIL-PRF-55342 MIL SPEC.
TERM.
P70 °C W
STYLE
SHEET
MAX. OPERATING
VOLTAGE
CHAR.
TOLERANCE RESISTANCE
%
RANGE Ω
RCWPM-0502
RM0502
01
B
0.05
40
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
RCWPM-550
RM0505
02
B
0.125
40
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
RCWPM-5100
RM1005
03
B
0.20
75
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-5150
RM1505
04
B
0.15
125
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-7225
RM2208
05
B
0.225
175
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-575
RM0705
06
B
0.15
50
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-1206
RM1206
07
B
0.25
100
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-2010
RM2010
08
B
0.80
150
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-2512
RM2512
09
B
1.0
200
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-1100
RM1010
10
B
0.50
75
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-0402
RM0402
11
B
0.05
30
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
RCWPM-0603
RM0603
12
B
0.10
50
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 5.6
5.62 to 22M
RCWPM-0302
RM0302
13
B
0.04
15
M
K, M
± 2 to ± 10
± 1 to ± 10
1 to 9.1
10 to 22M
Note
• DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on these drawing as
follows:
DSCC DRAWING
NUMBER
VISHAY DALE
MODEL
TERM.
POWER RATING
P70 °C W
RES. RANGE
Ω
RES. TOL.
%
TEMP. COEF.
ppm/°C
MAX. WORKING
VOLTAGE
07009
RCWP-0201
B
0.05
47 to 1M
10 to 1M
± 1; ± 5
100
200
30
07010
RCWP-0201
B
0.05
47 to 1M
10 to 1M
± 1; ± 5
100
300
30
These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/listDwgs.asp?DocType=DSCCdwg
www.vishay.com
130
For technical questions, contact: [email protected]
Document Number: 31010
Revision: 25-Jul-08
RCWPM (Military M/D55342)
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)
M
5
5
3
4
MIL
STYLE
CHARACTERISTICS
D55342
applies to
Style 07
(RM1206)
only.
K = 100 ppm
M = 300 ppm
2
SPEC
SHEET
M
0
2
B
1
TERMINATION VALUE AND
STYLE
TOLERANCE
(see Standard B = Pre-tinned (see Tolerance
Nickel Barrier, and Multipliers
Electrical
table)
wraparound
Specifications
table)
0
E
0
FAILURE
RATE
R
W
PACKAGING
C = Non-ER
M = 1.0 %/1000 h
P = 0.1 %/1000 h
R = 0.01 %/1000 h
S = 0.001 %/1000 h
T = Space Level
M55342
applies to
all other
styles.
B
SPECIAL
Blank = Standard
TP = Tin/Lead,
(Dash Number)
T/R (Full)
(up to 1 digits)
UL = Tin/Lead, T/R
Single Lot Date Code
T = Space
S3 = Tin/Lead,
Level (-98)
T/R (1000 pieces)
WB = Tin/Lead, Tray
WL = Tin/Lead, Tray,
Single Lot Date Code
S2 = Tin/Lead,
T/R (500 pieces)
S6 = Tin/Lead,
T/R (300 pieces)
Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)
M55342
MIL
STYLE
M
CHARACTERISTICS
02
B
10E0
R
WB
SPEC SHEET
TERMINATION
STYLE
VALUE AND
TOLERANCE
FAILURE
RATE
PACKAGING
CODE
RESISTANCE TOLERANCE AND MULTIPLIERS
TOLERANCE
MULTIPLIER
VALUE
RANGE (Ω)
±1%
±2%
±5%
± 10 %
D
G
J
M
1
1 - 9xx
E
H
K
N
1000
1K - 9xxK
F
T
L
P
1 000 000
1M - 22M
Examples:
Document Number: 31010
Revision: 25-Jul-08
11D3 = 11.3 Ω ± 1 %
10E0 = 10 kΩ ± 1 %
332D = 332 Ω ± 1 %
2F21 = 2.21 MΩ ± 1 %
51G0 = 51 Ω ± 2 %
10H0 = 10 kΩ ± 2 %
33H0 = 33 kΩ ± 2 %
22T0 = 22 MΩ ± 2 %
15J0 = 15 Ω ± 5 %
10K0 = 10 kΩ ± 5 %
560K = 560 kΩ ± 5 %
8L20 = 8.2 MΩ ± 5 %
10M0 = 10 Ω ± 10 %
10N0 = 10 kΩ ± 10 %
2P70 = 2.7 MΩ ± 10 %
8P20 = 8.2 MΩ ± 10 %
For technical questions, contact: [email protected]
www.vishay.com
131
RCWPM (Military M/D55342)
Thick Film Chip Resistors, Military/Established Reliability
MIL-PRF-55342 Qualified, Type RM
Vishay Dale
DIMENSIONS in inches [millimeters]
D
C
B
A
E
VISHAY DALE
MODEL
MIL-PRF-55342
STYLE
MIL.
SPEC.
SHEET
A
(Length)
B
(Width)
C
(Height)
D
(Top Term)
E
(Bottom Term)
RCWPM-0502
RM0502
01
0.055 ± 0.005
[1.40 ± 0.13]
0.023 ± 0.003
[0.58 ± 0.08]
0.015 ± 0.003
[0.38 ± 0.08]
0.010 ± 0.005
[0.25 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-550
RM0505
02
0.055 ± 0.005
[1.40 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.010 ± 0.005
[0.25 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-5100
RM1005
03
0.105 ± 0.005
[2.67 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-5150
RM1505
04
0.155 ± 0.005
[3.94 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-7225
RM2208
05
0.230 ± 0.005
[5.84 ± 0.13]
0.075 ± 0.005
[1.91 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-575
RM0705
06
0.080 ± 0.005
[2.03 ± 0.13]
0.050 ± 0.005
[1.27 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-1206
RM1206
07
0.125 ± 0.005
[3.18 ± 0.13]
0.063 ± 0.005
[1.60 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-2010
RM2010
08
0.197 ± 0.006
[5.00 ± 0.15]
0.098 ± 0.005
[2.49 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-2512
RM2512
09
0.250 ± 0.006
[6.35 ± 0.15]
0.124 ± 0.005
[3.15 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
RCWPM-1100
RM1010
10
0.105 ± 0.005
[2.67 ± 0.13]
0.100 ± 0.005
[2.54 ± 0.13]
0.020 ± 0.005
[0.51 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-0402
RM0402
11
0.039 ± 0.003
[0.99 ± 0.08]
0.020 ± 0.003
[0.51 ± 0.08]
0.013 ± 0.003
[0.33 ± 0.08]
0.010 ± 0.005
[0.25 ± 0.13]
0.010 ± 0.005
[0.25 ± 0.13]
RCWPM-0603
RM0603
12
0.063 ± 0.005
[1.60 ± 0.13]
0.032 ± 0.005
[0.81 ± 0.13]
0.018 ± 0.005
[0.46 ± 0.13]
0.012 ± 0.005
[0.31 ± 0.13]
0.015 ± 0.005
[0.38 ± 0.13]
RCWPM-0302
RM0302
13
0.034 ± 0.004
[0.86 ± 0.10]
0.021 ± 0.003
[0.53 ± 0.08]
0.015 ± 0.003
[0.38 ± 0.08]
0.007 ± 0.005
[0.18 ± 0.13]
0.008 ± 0.005
[0.20 ± 0.13]
0.024 ± 0.002
[0.60 ± 0.05]
0.012 ± 0.002
[0.30 ± 0.05]
0.009 ± 0.002
[0.23 ± 0.05]
0.006 ± 0.003
[0.15 ± 0.07]
0.006 + 0.002 - 0.004
[0.15 + 0.05 - 0.10]
Rated Power in %
RCWP-0201
120
100
80
CAGE CODE: 91637 and SH903
60
40
20
0
- 55 - 25
Derating
www.vishay.com
132
0
25
50
75 100 125 150 175
70 Ambient Temperature in °C
For technical questions, contact: [email protected]
Document Number: 31010
Revision: 25-Jul-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages