Murata NFE61PT102E1H9L Emifil (lc combined) feed through type Datasheet

Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Feed through Type
Data Sheet
1
EMIFILr (LC Combined) Feed through Type
NFE61P Series (2706 Size)
c Dimensions
c Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFE61PT330B1H9
NFE61PT680B1H9
10
(2)
(3)
1.6±0.3
(1)
NFE61PT101Z1H9
0.7±0.2
2.6±0.3
Insertion Loss (dB)
0.7±0.2
6.8±0.5
1.6±0.3
20
NFE61PT181B1H9
NFE61PT361B1H9
30
NFE61PT681B1H9
NFE61PT102E1H9
40
NFE61PT472C1H9
50
60
0.1
: Electrode
1
(in mm)
c Equivalent Circuit
10
Frequency (MHz)
100
1000 2000
c Packaging
Input (Output)
(1)
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
2500
K
330mm Embossed Tape
8000
B
Bulk(Bag)
500
Output (Input)
(3)
GND
(2)
No polarity.
c Rated Value (p: packaging code)
Capacitance
Rated Current
Rated Voltage
Insulation Resistance (min.)
Operating
Temperature Range
NFE61PT330B1H9p
33pF ±30%
2A
50Vdc
1000M ohm
-40 to +85°C
NFE61PT680B1H9p
68pF ±30%
2A
50Vdc
1000M ohm
-40 to +85°C
NFE61PT101Z1H9p
100pF ±30%
2A
50Vdc
1000M ohm
-40 to +85°C
NFE61PT181B1H9p
180pF ±30%
2A
50Vdc
1000M ohm
-40 to +85°C
Part Number
NFE61PT361B1H9p
360pF ±20%
2A
50Vdc
1000M ohm
-40 to +85°C
NFE61PT681B1H9p
680pF ±30%
2A
50Vdc
1000M ohm
-40 to +85°C
NFE61PT102E1H9p
1000pF 80/-20%
2A
50Vdc
1000M ohm
-40 to +85°C
NFE61PT472C1H9p
4700pF 80/-20%
2A
50Vdc
1000M ohm
-40 to +85°C
Number of Circuit: 1
Continued on the following page.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Feed through Type
Data Sheet
2
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.11.8
http://www.murata.com/
Similar pages