Cooper LDS0705-3R3M-R Shielded power inductor Datasheet

LDS0705 Series
Shielded Power Inductors
Description
RoHS
2002/95/EC
• 125°C maximum temperature operation
• 7.8mm x 7.0mm x 5.0mm shielded drum core
• Ferrite core material
• Metalized core mounting utilizes board space
• Inductance range from 0.82µH to 470µH
• Current range from 8.57 Amps to 0.368 Amps
• Frequency range up to 1MHz
Applications
• Buck or Boost Inductor
• Noise filtering and output filter chokes
• Battery Power, DC-DC converters
• Notebook power, PDA’s, Hand held computers
• DVD players
• Cellular phones
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(range is application specific)
• Solder reflow temperature: +260°C max. for 10 seconds
maximum
Part Number
LDS0705-R82M-R
LDS0705-1R5M-R
LDS0705-2R2M-R
LDS0705-3R3M-R
LDS0705-4R7M-R
LDS0705-6R8M-R
LDS0705-8R2M-R
LDS0705-100M-R
LDS0705-150M-R
LDS0705-220M-R
LDS0705-330M-R
LDS0705-470M-R
LDS0705-680M-R
LDS0705-820M-R
LDS0705-101M-R
LDS0705-151M-R
LDS0705-221M-R
LDS0705-331M-R
LDS0705-471M-R
Rated
Inductance
(µH)
0.82
1.5
2.2
3.3
4.7
6.8
8.2
10.0
15.0
22.0
33.0
47.0
68.0
82.0
100.0
150.0
220.0
330.0
470.0
Packaging
• Supplied in tape and reel packaging, 1000 per reel
OCL (1)
µH
Irms(2)
Amperes
Isat (3)
Amperes
0.861±20%
1.42±20%
2.13±20%
2.97±20%
5.08±20%
6.34±20%
7.75±20%
9.30±20%
14.78±20%
21.53±20%
32.50±20%
45.71±20%
69.76±20%
83.67±20%
98.9±20%
152.0±20%
216.5±20%
329.9±20%
467.0±20%
7.68
6.17
5.06
4.19
3.32
3.11
2.67
2.54
2.04
1.66
1.48
1.21
0.985
0.850
0.808
0.649
0.584
0.470
0.387
8.57
6.67
5.45
4.62
3.53
3.16
2.86
2.61
2.07
1.71
1.40
1.18
0.952
0.870
0.800
0.645
0.541
0.438
0.368
(1) Open Circuit Inductance Test Parameters: 100kHz, 0.1V, 0.0Adc.
(2) Irms: DC current for an approximate ∆T of 30°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed 125°C under worst
case operating conditions verified in the end application.
(3) Isat Amperes peak for approximately 15% rolloff (@25°C)
DCR (Ω)
@20°C
(Typical)
0.0040
0.0061
0.009
0.013
0.021
0.024
0.033
0.036
0.056
0.084
0.107
0.158
0.240
0.323
0.357
0.554
0.68
1.06
1.56
K-factor
(4)
24.8
19.3
15.8
13.4
10.2
9.2
8.3
7.6
6.0
5.0
4.0
3.4
2.8
2.5
2.3
1.9
1.6
1.3
1.1
(4) K-factor: Used to determine B p-p for core loss (see graph).
B p-p = K*L*∆I, B p-p(mT), K: (K factor from table), L: (Inductance in µH),
∆I (Peak to peak ripple current in Amps).
(5) Part Number Definition: LDS0705-xxx-R
LDS0705 = Product code and size; -xxx = Inductance value in uH;
R = decimal point; If no R is present, third character = # of zeros.
M = Inductance tolerance +/- 20% -R suffix = RoHS compliant
LDS0705 Series
Shielded Power Inductors
Mechanical Diagrams
SCHEMATIC
RECOMMENDED PCB LAYOUT
SIDE VIEW
BOTTOM VIEW
TOP VIEW
2.0
1
2.0 Typ.
XX X
7.0
5.0 Max.
7.0±0.2
wwllyy R
2
3.0
7.8±0.2
Dimensions are in millimeters.
xxx = Inductance in uH. R = decimal point. If no R is present third character = # of zeros.
wwllyy = Date code, R = Revision level.
Packaging Information
Parts packaged on 13" Diameter reel,
1,000 parts per reel.
Temperature Rise vs. Watt Loss
90
80
70
Temp. Rise (°C)
60
50
40
30
20
10
0
0
0.1
0.2
0.3
0.4
0.5
Total Loss (W)
0.6
0.7
0.8
0.9
1
LDS0705 Series
Shielded Power Inductors
Core Loss
100
1MHz
500kHz
10
300kHz
200kHz
1
Core Loss (W)
100kHz
50kHz
0.1
0.01
0.001
0.0001
1
10
100
1000
Bp-p (mT)
Inductance Characteristics
OCL vs. Isat
120%
110%
100%
90%
% of OCL
80%
-40
70%
60%
25
50%
40%
85
30%
20%
10%
0%
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200%
% of Isat
PM-4142 3/07
© Cooper Electronic
Technologies 2007
Visit us on the Web at www.cooperbussmann.com
1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487
Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640
This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic
Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been
selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the
express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Similar pages