PRODUCT DATASHEET Konntakt series last update 10/1/2018 DETAILS Product Number FP15501_HEKLA-C Family Konntakt Type Base part Color clear Diameter 44 mm Height 5,5 mm Style Optic Material Holder Material PBT Fastening Status production ready ROHS Compliant Yes Date Updated 10/01/2018 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm CLL02x/CLU02x (LES10) NA deg - sim: 0.000 - CLU700/701 NA deg - sim: 0.000 - Soleriq S9 NA deg - sim: 0.000 - LC006B / LC008B NA deg - sim: 0.000 - COB D Series LES 9.8 mm NA deg - sim: 0.000 - SLE G4 LES10 NA deg - sim: 0.000 - Connector February 8th 2018 2:17 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 5.5 4 35 2 4 3. 4 1 1 3 3 Code table HEKLA CONNECTOR 44 FP15490_HEKLA-A FP15500_HEKLA-B FP15501_HEKLA-C FP15502_HEKLA-D FP15503_HEKLA-E FP15947_HEKLA-G FP15948_HEKLA-H FP15949_HEKLA-I FP15957_HEKLA-J COB SIZE[mm] 12,5X12,5 17,85X17,85 13,5X13,5 15,85X15,85 15,8X15,8 12X15 16X19 19X19 13,35X13,35 LES MAX.[mm] HEKLA-SOCKET 9,0 14,2 11,6 10,7 14,3 10 14 17 7,5 F15253_HEKLA-SOCKET-A F15254_HEKLA-SOCKET-B F15255_HEKLA-SOCKET-C F15256_HEKLA-SOCKET-D F14988_HEKLA-SOCKET-E F15848_HEKLA-SOCKET-G F15858_HEKLA-SOCKET-H F15859_HEKLA-SOCKET-I F15956_HEKLA-SOCKET-J F15616_HEKLA-SOCKET-F 2 2 COMPONENTS INDEX PRODUCT TYPE 1 FPXXXXX_HEKLA-PIC-X 2 3 See code table See code table CONTACT SPRING ASSEMBLY SOCKET CONNECTOR MATERIAL COLOUR/COATING PBT+BeCu White+gold PBT PBT+BeCu White White+gold MECHANICAL DRAWING PRODUCT HEKLA-family 1 Notes 3 PCB or Heat Sink level Led location Ensure LED fitting, see our web site and/or 3D model for part detail. Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE H G 2:1 FIRST ANGLE PROJECTION: SIZE This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 B 1/2 SHEET A 1 3 A B C 50VDC/3A FOR USE IN SELV AND CLASS 2 (USA) APPLICATIONS ONLY SOLID WIRE 22 AWG ( 0,64mm); TINNED WIRE 22-20 AWG(SOLDER DIPPED) 5 +/-0,5 mm SCREWS 2XM3, WASHER 2XM3 0,6Nm 0,25mm 110 C GENERAL ASSEMBLY INSTRUCTION 2 D E F G H 4 GENERAL INFORMATION RATED VOLTAGE/CURRENT WIRE TYPE AND SIZE WIRE STRIP LENGTH FASTENING MAX.SCREW FIXING TORQUE MAX.TIM THICKNESS RATED TEMPERATURE 4 Screws M3+Washers (DIN125/DIN127) Max.torque 0,6Nm Solid wire AWG 22 Tinned wire AWG 22-20(solder dipped) Strip length 5mm TIM (max.thickness 0,25mm) Heat sink (simplified) 3 35m Note polarization m Remove the wire by slightly pulling and rotating at the same time. A new wire is recommended after removing the old one and check the functionality of the connector. 2 COB LED MECHANICAL DRAWING PRODUCT HEKLA-family 1 Notes PCB or Heat Sink level Led location Ensure LED fitting, see our web site and/or 3D model for part detail. Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE H G 2:1 FIRST ANGLE PROJECTION: SIZE This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A3 B 2/2 SHEET A 1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.