SMBJ5.0 thru SMBJ170A, CA, e3 and SMBG5.0 thru SMBG170A, CA, e3 SURFACE MOUNT 600 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION APPEARANCE This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in a Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available in both unidirectional and bidirectional configurations with a C or CA suffix part number as well as RoHS Compliant with an e3 suffix. Their response time is virtually instantaneous. As a result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for inductive switching environments and induced RF protection. They can also protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications. NOTE: All SMB series are equivalent to prior SMS package identifications. WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS • Available in both unidirectional and bidirectional construction (add C or CA suffix for bidirectional) • Selections for 5.0 to 170 volts standoff voltages (VWM) • Optional 100% screening for avionics grade is available by adding MA prefix to part number for 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in operating direction for unidirectional or both directions for bidirectional) • Options for screening in accordance with MIL-PRF-19500 for JANTX are available by adding MX prefix to the part number. • Axial-lead equivalent packages for thru-hole mounting available as P6KE6.8 to P6KE200CA (consult factory for other surface mount options) • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • RoHS compliant devices available by adding an “e3” suffix • • • • • • • • MAXIMUM RATINGS MECHANICAL AND PACKAGING º • • • • • • • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Gull-wing or C-bend (modified J-bend) tin-lead or RoHS compliant annealed matte-tin plating solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band. No marking on bi-directional devices MARKING: Part number without standard prefix (e.g. 5.0, 5.0A, 5.0CA, 5.0Ae3, 36, MX36A, 36CAe3, etc.) TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape, 750 per 7 inch reel or 2500 per 13 inch reel (add “TR” suffix to part number) WEIGHT: 0.1 grams See package dimension on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 SMB5.0– 170AC, e3 • Peak Pulse Power dissipation at 25 C: 600 watts at 10/1000 μs (also see Fig 1,2, and 3). • Impulse repetition rate (duty factor): 0.01% • tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional • Operating and Storage temperature: -65ºC to +150ºC • Thermal resistance: 25 ºC/W junction to lead, or 90ºC/W junction to ambient when mounted on FR4 PC board (1oz Cu) with recommended footprint (see last page) o • Steady-State Power dissipation: 5 watts at TL = 25 C, or º 1.38 watts at TA = 25 C when mounted on FR4 PC board with recommended footprint • Forward Surge at 25ºC: 100 Amps peak impulse of 8.3 ms half-sine wave (unidirectional only) • Solder temperatures: 260 ºC for 10 s (maximum) Copyright © 2009 SA3-37, REV J, 5-24-2009 Economical surface mount design in both J-bend or Gull-wing terminations Protects sensitive components such as IC’s, CMOS, 2 Bipolar, BiCMOS, ECL, DTL, T L, etc. Protection from switching transients & induced RF Compliant to IEC61000-4-2 and IEC61000-4-4 for ESD and EFT protection respectively Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1: SMB 5.0 to SMB 120A or CA Class 2: SMB 5.0 to SMB 60A or CA Class 3: SMB 5.0 to SMB 30A or CA Class 4: SMB 5.0 to SMB 15A or CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1: SMB 5.0 to SMB 36A or CA Class 2: SMB 5.0 to SMB 18A or CA SMBJ5.0 thru SMBJ170A, CA, e3 and SMBG5.0 thru SMBG170A, CA, e3 SURFACE MOUNT 600 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION Copyright © 2009 SA3-37, REV J, 5-24-2009 Volts 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 BREAKDOWN VOLTAGE V(BR) @ I(BR) Volts I(BR) mA MIN. MAX. 10 6.40 – 7.30 10 6.40 – 7.00 10 6.67 – 8.15 10 6.67 – 7.37 10 7.22 – 8.82 10 7.22 – 7.98 10 7.78 – 9.51 10 7.78 – 8.60 1 8.33 – 10.2 1 8.33 – 9.21 1 8.89 – 10.9 1 8.89 – 9.83 1 9.44 – 11.5 1 9.44 – 10.4 1 10.0 – 12.2 1 10.0 – 11.1 1 11.1 – 13.6 1 11.1 – 12.3 1 12.2 – 14.9 1 12.2 – 13.5 1 13.3 – 16.3 1 13.3 – 14.7 1 14.4 – 17.6 1 14.4 – 15.9 1 15.6 – 19.1 1 15.6 – 17.2 1 16.7 – 20.4 1 16.7 – 18.5 1 17.8 – 21.8 1 17.8 – 19.7 1 18.9 – 23.1 1 18.9 – 20.9 1 20.0 – 24.4 1 20.0 – 22.1 1 22.2 – 27.1 1 22.2 – 24.5 1 24.4 – 29.8 1 24.4 – 26.9 1 26.7 – 32.6 1 26.7 – 29.5 1 28.9 – 35.3 1 28.9 – 31.9 1 31.1 – 38.0 1 31.1 – 34.4 1 33.3 – 40.7 1 33.3 – 36.8 1 36.7 – 44.9 1 36.7 – 40.6 1 40.0 – 48.9 1 40.0 – 44.2 1 44.4 – 54.3 1 44.4 – 49.1 1 47.8 – 58.4 1 47.8 – 52.8 1 50.0 – 61.1 1 50.0 – 55.3 MAXIMUM CLAMPING VOLTAGE @ IPP PEAK PULSE CURRENT (See Fig. 2) IPP Volts 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 Amps 62.5 65.2 52.6 58.3 48.7 53.6 45.1 50.0 42.0 46.5 40.0 44.1 37.7 41.7 35.5 39.0 31.9 35.3 29.9 33.0 27.3 30.2 25.2 27.9 23.3 25.8 22.3 24.0 20.8 23.1 19.7 21.7 18.6 20.5 16.7 18.5 15.2 16.9 14.0 15.4 12.4 14.2 12.0 13.2 11.2 12.4 10.2 11.3 9.3 10.3 8.4 9.3 7.8 8.6 7.5 8.3 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 MAXIMUM STANDBY CURRENT @ VWM ID μA 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page 2 SMB5.0– 170AC, e3 MICROSEMI PART NUMBER GULL-WING MODIFIED “J” LEAD BEND LEAD SMBJ5.0 SMBG5.0 SMBJ5.0A SMBG5.0A SMBJ6.0 SMBG6.0 SMBJ6.0A SMBG6.0A SMBJ6.5 SMBG6.5 SMBJ6.5A SMBG6.5A SMBJ7.0 SMBG7.0 SMBJ7.0A SMBG7.0A SMBJ7.5 SMBG7.5 SMBJ7.5A SMBG7.5A SMBJ8.0 SMBG8.0 SMBJ8.0A SMBG8.0A SMBJ8.5 SMBG8.5 SMBJ8.5A SMBG8.5A SMBJ9.0 SMBG9.0 SMBJ9.0A SMBG9.0A SMBJ10 SMBG10 SMBJ10A SMBG10A SMBJ11 SMBG11 SMBJ11A SMBG11A SMBJ12 SMBG12 SMBJ12A SMBG12A SMBJ13 SMBG13 SMBJ13A SMBG13A SMBJ14 SMBG14 SMBJ14A SMBG14A SMBJ15 SMBG15 SMBJ15A SMBG15A SMBJ16 SMBG16 SMBJ16A SMBG16A SMBJ17 SMBG17 SMBJ17A SMBG17A SMBJ18 SMBG18 SMBJ18A SMBG18A SMBJ20 SMBG20 SMBJ20A SMBG20A SMBJ22 SMBG22 SMBJ22A SMBG22A SMBJ24 SMBG24 SMBJ24A SMBG24A SMBJ26 SMBG26 SMBJ26A SMBG26A SMBJ28 SMBG28 SMBJ28A SMBG28A SMBJ30 SMBG30 SMBJ30A SMBG30A SMBJ33 SMBG33 SMBJ33A SMBG33A SMBJ36 SMBG36 SMBJ36A SMBG36A SMBJ40 SMBG40 SMBJ40A SMBG40A SMBJ43 SMBG43 SMBJ43A SMBG43A SMBJ45 SMBG45 SMBJ45A SMBG45A REVERSE STAND-OFF VOLTAGE VWM WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @ 25oC SMBJ5.0 thru SMBJ170A, CA, e3 and SMBG5.0 thru SMBG170A, CA, e3 SURFACE MOUNT 600 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION • • Volts 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 BREAKDOWN VOLTAGE V(BR) @ I(BR) Volts I(BR) mA MIN. MAX. 1 53.3 – 65.1 1 53.3 – 58.9 1 56.7 – 69.3 1 56.7 – 62.7 1 60.0 – 73.3 1 60.0 – 66.3 1 64.4 – 78.7 1 64.4 – 71.2 1 66.7 – 81.5 1 66.7 – 73.7 1 71.1 – 86.9 1 71.1 – 78.6 1 77.8 – 95.1 1 77.8 – 86.0 1 83.3 – 102 1 83.3 – 92.1 1 86.7 – 106 1 86.7 – 95.8 1 94.4 – 115 1 94.4 – 104 1 100 – 122 1 100 – 111 1 111 – 136 1 111 – 123 1 122 – 149 1 122 – 135 1 133 – 163 1 133 – 147 1 144 – 176 1 144 – 159 1 167 – 204 1 167 – 185 1 178 – 218 1 178 – 197 1 189 – 231 1 189 – 209 MAXIMUM CLAMPING VOLTAGE @ IPP PEAK PULSE CURRENT (See Fig. 2) IPP Volts 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 Amps 7.0 7.7 6.6 7.3 6.2 6.9 5.8 6.4 5.6 6.2 5.3 5.8 4.8 5.3 4.5 4.9 4.3 4.7 3.9 4.4 3.8 4.1 3.4 3.7 3.0 3.4 2.8 3.1 2.6 2.9 2.2 2.5 2.1 2.3 2.0 2.2 MAXIMUM STANDBY CURRENT @ VWM ID μA 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 SYMBOLS & DEFINITIONS Definition Symbol Symbol VWM PPP V(BR) ID Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current Copyright © 2009 SA3-37, REV J, 5-24-2009 IPP VC I(BR) Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 SMB5.0– 170AC, e3 For Bidirectional device types indicate a C or CA suffix after the part number. (i.e.: SMBG170CA or SMBJ170C). Bidirectional capacitance is half that shown in figure 4 at zero volts. Microsemi Corp’s SMB series (600 W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance path for surge current flow to ground. These high speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices. WWW . Microsemi .C OM MICROSEMI PART NUMBER GULL-WING MODIFIED “J” LEAD BEND LEAD SMBJ48 SMBG48 SMBJ48A SMBG48A SMBJ51 SMBG51 SMBJ51A SMBG51A SMBJ54 SMBG54 SMBJ54A SMBG54A SMBJ58 SMBG58 SMBJ58A SMBG58A SMBJ60 SMBG60 SMBJ60A SMBG60A SMBJ64 SMBG64 SMBJ64A SMBG64A SMBJ70 SMBG70 SMBJ70A SMBG70A SMBJ75 SMBG75 SMBJ75A SMBG75A SMBJ78 SMBG78 SMBJ78A SMBG78A SMBJ85 SMBG85 SMBJ85A SMBG85A SMBJ90 SMBG90 SMBJ90A SMBG90A SMBJ100 SMBG100 SMBJ100A SMBG100A SMBJ110 SMBG110 SMBJ110A SMBG110A SMBJ120 SMBG120 SMBJ120A SMBG120A SMBJ130 SMBG130 SMBJ130A SMBG130A SMBJ150 SMBG150 SMBJ150A SMBG150A SMBJ160 SMBG160 SMBJ160A SMBG160A SMBJ170 SMBG170 SMBJ170A SMBG170A REVERSE STAND-OFF VOLTAGE VWM SMBJ5.0 thru SMBJ170A, CA, e3 and SMBG5.0 thru SMBG170A, CA, e3 SURFACE MOUNT 600 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION WWW . Microsemi .C OM GRAPHS 50 PPP – Peak Pulse Power – kW 30 o TC = 25 C 10 5.0 3.0 2.0 1.0 0.5 0.3 0.2 0.1 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 1000 10,000 Test waveform parameters: tr=10 μs, tw=1000 μs tw – Pulse Width - μs FIGURE 2 Pulse Waveform for Exponential Surge PAD LAYOUT C – Capacitance - Picofarads Peak Pulse Power (PPP) or continuous o Power in Percent of 25 C Rating FIGURE 1 Peak Pulse Power vs. Pulse Time o TL Lead Temperature C A B C INCHES 0.320 0.085 0.110 K .015 .030 L .030 .060 .381 .762 .760 1.520 SMBJ mm 6.60 2.16 2.79 SMBG V(BR) - Breakdown Voltage – Volts FIGURE 4 Typical Capacitance vs Breakdown Voltage mm 8.13 2.16 2.79 SMB5.0– 170AC, e3 FIGURE 3 - Derating Curve A B C INCHES .260 .085 .110 PACKAGE DIMENSIONS Copyright © 2009 SA3-37, REV J, 5-24-2009 MIN MAX A .077 .083 MIN MAX 1.96 2.10 B C D E F .160 .130 .205 .077 .235 .180 .155 .220 .104 .255 DIMENSIONS IN MILLIMETERS 4.06 3.30 5.21 1.95 5.97 4.57 3.94 5.59 2.65 6.48 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4