MORNSUN E0505XT-1WAR2 Dc/dc converter Datasheet

DC/DC Converter
E_XT-1WAR2 Series
FEATURES
1W, Fixed input voltage, isolated & unregulated
dual output
z Operating temperature range: -40℃ to +105℃
z High efficiency up to 82%
z Miniature SMD package
z Isolation voltage: 3K VDC
z Internal surface mounted design
z No external component required
z International standard pin-out
Patent Protection RoHS
E_XT-1WAR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They
are suitable for
1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin);
2. Where isolation between input and output is necessary (isolation voltage ≤3000VDC);
3. Where the output voltage regulation is not strictly required;
4. Typical application: preceding-stage interference isolation condition; ground-interference canceled condition; digit circuit condition;
Voltage-isolation converting condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc.
Selection Guide
Input Voltage (VDC)
Certification
Part No.
Efficiency (%,Min./Typ.)
Nominal
Output Voltage
Output Current (mA)
(Range)
(VDC)
(Max./Min.)
3.3
(2.97-3.63)
±5
±100/±10
72/76
±12
±42/±5
73/77
E0505XT-1WAR2
±5
±100/±10
76/80
E0509XT-1WAR2
±9
±56/±6
76/80
±12
±42/±5
75/79
E0305XT-1WAR2
E0312XT-1WAR2
E0512XT-1WAR2
E0515XT-1WAR2
5
(4.5-5.5)
@ Full Load
±15
±33/±3
77/81
E0524XT-1WAR2
±24
±21/±2
77/81
E1205XT-1WAR2
±5
±100/±10
76/80
±9
±56/±6
76/80
±12
±42/±5
77/81
±15
±33/±3
77/81
±24
±21/±2
77/81
±15
±33/±3
77/81
±5
±100/±10
76/80
E1209XT-1WAR2
CE
Output
E1212XT-1WAR2
E1215XT-1WAR2
12
(10.8-13.2)
E1224XT-1WAR2
E1515XT-1WAR2
15
(13.5-16.5)
E2405XT-1WAR2
E2409XT-1WAR2
E2412XT-1WAR2
E2415XT-1WAR2
24
(21.6-26.4)
E2424XT-1WAR2
±9
±56/±6
76/80
±12
±42/±5
77/81
±15
±33/±3
78/82
±24
±21/±2
72/76
Max. Capacitive
Load
(μF)
100
Note: *The capacitive loads of positive and negative outputs are identical.
Input Specifications
Item
Input Current
(full load / no-load)
Reflected Ripple Current
Operating Conditions
Min.
Typ.
Max.
3.3V input
--
389/25
--/70
5V input
--
250/20
--/60
12V input
--
104/15
--/50
15V input
--
83/12
--35
24V input
--
52/10
--/30
--
15
--
2015.04.14-A/2
Unit
mA
mA
Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
E_XT-1WAR2 Series
Surge Voltage (1sec. max.)
3.3V input
-0.7
--
5
5V input
-0.7
--
9
12V input
-0.7
--
18
15V input
-0.7
--
21
24V input
-0.7
--
30
Input Filter
VDC
Filter capacitor
Hot Plug
Unavailable
Output Specifications
Item
Operating Conditions
Min.
Output Voltage Accuracy
Max.
Unit
See tolerance envelope curve(Fig. 1)
Line Regulation
Input voltage change: ±1%
Load Regulation
10%-100% load
--
±1.2
5VDC output
--
12
--
--
9
--
12VDC output
--
8
--
15VDC output
--
7
--
20MHz bandwidth
Temperature Coefficient
--
9VDC output
24VDC output
Ripple & Noise*
Short Circuit Protection**
Typ.
--
%
--
6
--
--
60
150
mVp-p
Full load
--
--
±0.03
%/℃
E24xxXT-1WAR2/E0524XT-1WAR2
--
--
1
s
Others
Continuous, self-recovery
Note: * Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation;
**Supply voltage must be discontinued at the end of short circuit duration for E0524XT-1WAR2 model and E24xxXT-1WAR2 series.
General Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
Isolation Voltage
Input-output, with the test time of 1 minute and the leak current
lower than 1mA
3000
--
--
VDC
Isolation Resistance
Input-output, isolation voltage 500VDC
1000
--
--
MΩ
Isolation Capacitance
Input-output, 100KHz/0.1V
--
20
--
pF
Operating Temperature
Derating when operating temperature up to 100℃, (see Fig. 2)
Storage Temperature
-40
--
105
-55
--
125
Casing Temperature Rise
Ta=25℃, nominal input, full load output
--
25
--
Pin Welding Resistance
Temperature
Welding spot is 1.5mm away from the casing, 10 seconds
--
--
300
Storage Humidity
Non-condensing
--
--
95
℃
%RH
Peak temp.≤245℃, maximum duration
time≤60s at 217℃.
For actual application, please refer to
IPC/JEDEC J-STD-020D.1.
Reflow Soldering Temperature
Switching Frequency
Full load, nominal input voltage
MTBF
MIL-HDFK-217F@25℃
--
100
--
KHz
3500
--
--
K hours
Physical Specifications
Casing Material
Black flame-retardant heat-proof epoxy resin (UL94-V0)
Dimensions
15.24*11.20*7.25 mm
Weight
2.0g (Typ.)
Cooling Method
Free convection
EMC Specifications
EMI
EMS
CE
CISPR22/EN55022
CLASS B (see Fig. 4 for recommended circuit)
RE
CISPR22/EN55022
CLASS B (see Fig. 4 for recommended circuit)
ESD
IEC/EN61000-4-2
Contact
±6KV perf. Criteria B
2015.04.14-A/2
Page 2 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
E_XT-1WAR2 Series
+15%
Tolerance Envelope Cur ve
+10%
Output Po we r Percentage(%)
Output Voltage Accuracy (%)
Product Characteristic Curve
Max .
+5%
Ty p.
0
+2.5%
M in.
-5%
-2.5%
-7.5%
-10%
10% 20%
40%
60%
80%
100%
Te mp era t ur e Dera t ing Curv e
120
100
80
60
Safe Operating Area
40
20
0
-40
Output Current Percent(%)
(Nominal Input Voltage)
40
80 100 105
0
Ambient Tempe rature( ℃)
Fig. 2
Fig. 1
Efficiency Vs Output Load(Vin=5V)
Efficiency Vs Input Voltage (Full Load)
95
90
90
80
85
70
E0505XT-1WAR2
80
75
70
65
60
Efficiency(%)
100
Efficiency(%)
100
55
60
50
40
30
20
10
50
4.5 4.6 4.7 4.8 4.9
5
0
5.1 5.2 5.3 5.4 5.5
10
Input Voltage(V)
20
30
40
50
60
70
80
90
100
Output Current Percentage (%)
Efficiency Vs Input Voltage (Full Load)
Efficiency Vs Output Load(Vin=12V)
100
100
95
90
90
80
85
E1205XT-1WAR2
80
75
70
65
60
Efficiency(%)
Efficiency(%)
E0505XT-1WAR2
E1205XT-1WAR2
70
60
50
40
30
20
55
10
50
0
10.8 11.1 11.4 11.7 12.0 12.3 12.6 12.9 13.2
10
Input Voltage(V)
20
30
40
50
60
70
80
Output Current Percentage (%)
90
100
Design Reference
1. Typical application circuit
If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3.
Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the
condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1.
Recommended capacitive load value table (Table 1)
Vin
GND
Cin
DC DC
Fig.3
Cout
Cout
+Vo
0V
-Vo
Vin(VDC)
Cin(μF)
Vo (VDC)
Cout(μF)
3.3
4.7
±5
4.7
5
4.7
±9
2.2
12
2.2
±12
1
15
2.2
±15
1
24
1
±24
0.47
2015.04.14-A/2
Page 3 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
E_XT-1WAR2 Series
2. EMC solution-recommended circuit
LDM
Vin
DC/DC
C1
GND
Input voltage (VDC)
+Vo
Vin
GND
LOAD
C2
EMI
-Vo
3.3/5/12
15/24
C1
4.7μF /50V
C2
Refer to the Cout in Fig.3
LDM
6.8μH
CY
--
1nF /3KV
Note: 1. 24V input series, 24V output series is subject to CY (CY : 1nF/3KV).
2. It is not needed to add the component in the peripheral circuit when
parameter with the symbol of "--".
CY
Fig. 4
3. Output load requirements
When using, the minimum load of the module output should not be less than 10% of the nominal load. In order to meet the performance
parameters of this datasheet, please connect a 10% dummy load in parallel at the output end, the dummy load is generally a resistor,
Please note that the resistor needs to be used in derating.
4. For more information please find DC-DC converter application notes on www.mornsun-power.com
Dimensions and Recommended Layout
THIRDANGLEPROJECTION
0.60[0.024]
2.10[0.083]
7
TopView
1
2
4
5
12.20[0.480]
10
0.25[0.010]
A
0 ~5
°
8.30[0.327]
TopView
11.20±0.30[0.441±0.012]
15.24±0.50[0.600±0.020]
2.54[0.100]
10.16[0.400]
1.00[0.039]
2.54[0.100]
10.16[0.400]
7.00[0.276]
7.25[0.285]
Note:Grid2.54*2.54mm
FrontView
RightView
A
Pin-Out
0.88[0.035]
0.10
Note:
Unit:mm[inch]
Pinsectiontolerances:±0.10[±0.004]
Generaltolerances:±0.25[±0.010]
Pin
Function
1
GND
2
Vin
4
0V
5
-Vo
7
+Vo
10
NC
NC:NoConnection
2EXT1WAR201-A1
2015.04.14-A/2
Page 4 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
E_XT-1WAR2 Series
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing
bag number: 58210023;
If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all
parameters in the datasheet;
The maximum capacitive load offered were tested at nominal input voltage and full load;
Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 ℃ , humidity<75% with nominal
input voltage and rated output load;
All index testing methods in this datasheet are based on our Company’s corporate standards;
The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model
products may exceed the requirements mentioned above. Please contact our technicians directly for specific information;
We can provide product customization service;
Specifications are subject to change without prior notice.
MORNSUN Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: [email protected]
2015.04.14-A/2
Page 5 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
Similar pages