Hirose GT5-1PP-HUD Coaxial cable connection of antennas, sensors, and communication trunk line Datasheet

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
SAE/USCAR-19
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT5 Series
— Connectors for coaxial cables —
<Several types and configurations: In-line, board mounted, combinations of
coaxial cable with signal/power, Multi-position and color/ keying variations.>
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient termination
Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production with
semi-automatic equipment.
Space-saving Design
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Color and polarizing variations
Excellent High Frequency Performance
Refer to V.S.W.R. data on the following pages.
Applications
In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems,
RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of
communication equipment, office automation equipment, LAN systems.
*"Twin Crimp "is a registered trade mark of Hirose Electric.
27
B Test Data (Using 1.5D-2V Type cable)
High Frequency Characteristics (V.S.W.R.)
Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.
B Termination sequence
28
1. Strip the cable.
2. Crimp the cable to the terminal.
3. Insert the terminal in the housing until is fully locked.
4. Fully insert the retainer.
Terminals for coaxial shielded cable
F Connector Terminals
Part Number
*
*
*
*
*
*
*
CL No.
Conductor Size (AWG)
Inner Insulation
Diameter
Outer
Diameter
Packaging
GT5-30/0.7-1.5SCF
755-0065-1
#30 or equivalent
0.6 to 0.9mm
1.4 to 1.8mm 1,300 pcs. per reel
GT5-2428/1.6-2.5SCF
755-0078-3
#30 or equivalent
1.5 to 2.0mm
2.3 to 2.7mm 1,300 pcs. per reel
GT5-30/1.6-2.9SCF
755-0022-9
#24 to 28 or equivalent
GT5-2428/1.6-2.9SCF
755-0002-1
#24 to 28 or equivalent
1.5 to 2.0mm
2.6 to 3.4mm 1,300 pcs. per reel
GT5-2022/1.6-2.9SCF
755-0071-4
#20 to 22 or equivalent
GT5-2022/F2.7-3.5SCF
755-0077-0
#20 to 22 or equivalent
2.4 to 2.9mm
3.3 to 3.7mm 1,100 pcs. per reel
GT5-2022/F3.3-3.8SCF
755-0054-5
#20 to 22 or equivalent
2.5 to 2.9mm
3.6 to 4.0mm 1,100 pcs. per reel
GT5-30/3.3-5SCF
755-0016-6
#30 or equivalent
GT5-2428/F3.3-5SCF
755-0012-5
#24 to 28 or equivalent
2.5 to 2.9mm
4.6 to 5.0mm 1,100 pcs. per reel
GT5-2022/F3.3-5SCF
755-0034-8
#20 to 22 or equivalent
GT5-30/F4-5SCF
755-0020-3
#30 or equivalent
GT5-2428/F4-5SCF
755-0024-4
#24 to 28 or equivalent
GT5-2022/F4-5SCF
755-0036-3
#20 to 22 or equivalent
3.0 to 3.6mm
4.6 to 5.0mm 1,100 pcs. per reel
Part
Material
Finish
Insulator
PBT
Color: Dark gray
Crimp terminals
Phosphor bronze
Tin plating
Outer terminals
Brass
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Terminals
Conductor Size (AWG)
Inner Insulation
Diameter
Outer
Diameter
Packaging
GT5-30/0.7-1.5PCF
755-0017-9
#30 or equivalent
0.6 to 0.9mm
1.4 to 1.8mm
900 pcs. per reel
GT5-30/1.6-2.9PCF
755-0021-6
#30 or equivalent
GT5-2428/1.6-2.9PCF
755-0001-9
#24 to 28 or equivalent
1.5 to 2.0mm
2.6 to 3.4mm
900 pcs. per reel
GT5-2022/1.6-2.9PCF
755-0094-0
#20 to 22 or equivalent
GT5-2022/F2.7-3.5PCF
755-0076-8
#20 to 22 or equivalent
2.4 to 2.9mm
3.3 to 3.7mm
900 pcs. per reel
GT5-2022/F3.3-3.8PCF
755-0053-2
#20 to 22 or equivalent
2.5 to 2.9mm
3.6 to 4.0mm
900 pcs. per reel
GT5-30/F3.3-5PCF
755-0015-3
#30 or equivalent
GT5-2428/F3.3-5PCF
755-0011-2
#24 to 28 or equivalent
2.5 to 2.9mm
4.6 to 5.0mm
900 pcs. per reel
GT5-2022/F3.3-5PCF
755-0033-5
#20 to 22 or equivalent
GT5-30/F4-5PCF
755-0019-4
#30 or equivalent
GT5-2428/F4-5PCF
755-0023-1
#24 to 28 or equivalent
GT5-2022/F4-5PCF
755-0035-0
#20 to 22 or equivalent
Part Number
*
*
*
*
*
*
*
CL No.
3.0 to 3.6mm
4.6 to 5.0mm
900 pcs. per reel
Part
Material
Finish
Insulator
PBT
Color: Dark gray
Crimp terminals
Brass
Tin plating
Outer terminals
Brass
Tin plating
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
Low-insertion M Connector Terminals
Part Number
HRS No.
Conductor Size (AWG)
Inner Insulation
Diameter
Outer
Diameter
Packaging
0.6 to 0.9mm
1.4 to 1.8mm
900 pcs. per reel
GT5L-30/0.7-1.5PCF
755-0068-0
#30 or equivalent
GT5L-30/1.6-2.9PCF
755-0067-7
#30 or equivalent
GT5L-2428/1.6-2.9PCF
755-0066-4
#24 to 28 or equivalent 1.5 to 2.0mm
GT5L-2428/1.6-2.5PCF
755-0079-6
#24 to 28 or equivalent
2.6 to 3.4mm
900 pcs. per reel
Part
Material
Finish
Insulator
PBT
Color: Dark gray
Crimp terminals
Brass
Tin plating
Outer terminals
Brass
Tin plating
29
BKeying Configurations
For Single-Conductor coaxial shielded cable
F Connectors
Housing
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1S-HU
Part Number
CL No.
Material
Color
Key polarizing Corresponding M Connector
code
Housing- In-line
Corresponding M Connector USCAR-19
Assembly- Board Mounting
Coding
GT5-1S-HU
755-0004-7
Light gray
Figure q
GT5-1PP-HU
GT5-1P-DS
-
GT5-1S-HU(A)
755-0037-6
Brown
Figure w
GT5-1PP-HU(A)
GT5-1P-DS(A)
A
GT5-1S-HU(B)
755-0038-9
Green
Figure e
GT5-1PP-HU(B)
GT5-1P-DS(B)
B
GT5-1S-HU(C)
755-0080-5
Blue
Figure r
GT5-1PP-HU(C)
GT5-1P-DS(C)
C
GT5-1S-HU(D)
755-0081-8
Purple
Figure t
GT5-1PP-HU(D)
GT5-1P-DS(D)
D
GT5-1S-HU(E)
755-0082-0
Pink
Figure y
GT5-1PP-HU(E)
GT5-1P-DS(E)
E
GT5-1S-HU( I )
Note 1
Black
Figure u
GT5-1PP-HU( I )
GT5-1P-DS( I )
I
GT5-1S-HU(J)
Note 1
Cream white
Figure i
GT5-1PP-HU(J)
GT5-1P-DS(J)
J
GT5-1S-HU(K)
Note 1
Pastel orange
Figure o
GT5-1PP-HU(K)
GT5-1P-DS(K)
K
PBT
Terminal extraction tool: GT-PO(A), Note 1: concept only
Retainer (-Optional-Used with the housings: GT5-1S-HU, GT5-1PPHU, GT5N-1PP-HU, GT5H-1PP-HU, and GT5-1PB-HU)
Part Number
CL No.
Material
Color
GT5-1P/S-R
755-0006-2
PBT
Dark gray
Housing (Not requiring use of the retainer)
GT5R-1S/ HU
Part Number
CL No.
Material
Color
GT5R-1S-HU
755-0047-0
PBT
Light gray
Terminal extraction tool: GT-PO(A)
30
BShown with inserted retainer.
Retainer
BKeying Configurations
M Connectors
Housing
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
Mounting bracket
attachment side
Outside ground connection
BShown with inserted retainer.
Part Number
CL No.
Corresponding F Connector
Housing
Color
Key polarizing USCAR-19
code
Coding
GT5-1PP-HU
755-0005-0
GT5-1S-HU
Light Gray
Figure q
-
GT5-1PP-HU(A)
755-0039-1
GT5-1S-HU(A)
Brown
Figure w
A
GT5-1PP-HU(B)
755-0040-0
GT5-1S-HU(B)
Green
Figure e
B
GT5-1PP-HU(C)
755-0103-9
GT5-1S-HU(C)
Blue
Figure r
C
GT5-1PP-HU(D)
755-0104-1
GT5-1S-HU(D)
Purple
Figure t
D
GT5-1PP-HU(E)
755-0105-4
GT5-1S-HU(E)
Pink
Figure y
E
GT5-1PP-HU( I )
Note 1
GT5-1S-HU( I )
Black
Figure u
I
GT5-1PP-HU(J)
Note 1
GT5-1S-HU(J)
Cream white
Figure i
J
GT5-1PP-HU(K)
Note 1
GT5-1S-HU(K)
Pastel orange
Figure o
K
* Refer to pages 32 and 34 for panel brackets used with in-line connectors.
* Terminal extraction tool: GT-PO(A)
Note 1: concept only
Housing (For use with H type mounting
bracket)
Part Number
CL No.
Color
GT5H-1PP-HU (10)
755-0093-7 10
Light Gray
GT5H-1PP-HU (41)
755-0093-7 41
Blue
CL No.
Color
GT5N-1PP-HU
755-0090-9
Light Gray
Part
Material
Finish
Housing
PBT
Color: Dark gray
Ground terminal
Phosphor bronze
Tin plating
BFully mated connector assemblies.
Corresponding F Connector
Housing
GT5-1S-HU
GT5R-1S-HU
Housing (For use with N type mounting
bracket)
Part Number
Retainer
BFully mated connector assemblies.
Corresponding F Connector
Housing
GT5-1S-HU
GT5R-1S-HU
31
Housings
mounting, enhanced
[ Panel
]
shielding configuration
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
M3
Panel
thickness:1.6
Part Number
GT5A-1PP-HU
CL No.
755-0025-7
Part
Material
Finish
Housing
PBT
Color: Light gray
Ground terminal
Brass
Tin plating
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
BRecommended Panel Cut-out
BMounted and fully mated
connectorassemblies
Part Number
GT5P-1PP-HU
CL No.
755-0030-7
Part
Material
Finish
Housing
PBT
Color: Light gray
Ground terminal
Brass
Tin plating
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
of 1.6 mm).
32
Panel
thickness:1.6
1
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
Chassis
Assembly Diagram (1:1)
Part Number
GT5B-1PP-HU
CL No.
755-0051-7
Part
Material
Finish
Housing
PBT
Color: Light gray
Ground terminal
Copper alloy
Tin plating
Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board
thickness of 1.6 mm).
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
of 1.6 mm).
BRecommended Panel Cut-out
BMounted and fully mated connector
assemblies
Chassis
Assembly Diagram (1:1)
Part Number
GT5S-1PP-HU
CL No.
755-0050-4
Part
Material
Finish
Housing
PBT
Color: Light gray
Ground terminal
Copper alloy
Tin plating
Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board
thickness of 1.6 mm).
Note 2: Retainer is optional.
Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness
of 1.6 mm).
33
11.8
Connector assembly, Printed
Circuit Board Mounting Type
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
3
Figure q
BDiagram of Mated Connector in Use
BRecommended PCB Mounting Pattern
For outer conductor
Key polarizing
Corresponding F Connector
M Connector-Board Type
code
Housing
CL No.
Color
GT5-1P-DS
755-0007-5
Light Gray
Figure q
GT5-1P-DS
GT5-1S-HU
GT5-1P-DS(A)
755-0041-3
Brown
Figure w
GT5-1P-DS(A)
GT5-1S-HU(A)
GT5-1P-DS(B)
755-0042-6
Green
Figure e
GT5-1P-DS(B)
GT5-1S-HU(B)
GT5-1P-DS(C)
755-0083-3
Blue
Figure r
GT5-1P-DS(C)
GT5-1S-HU(C)
GT5-1P-DS(D)
755-0084-6
Purple
Figure t
GT5-1P-DS(D)
GT5-1S-HU(D)
Part
Material
GT5-1P-DS(E)
755-0085-9
Pink
Figure y
GT5-1P-DS(E)
GT5-1S-HU(E)
Housing
PBT
-
GT5-1P-DS( I )
Note 2
Black
Figure u
GT5-1P-DS( I )
GT5-1S-HU( I )
0.65 x 1.1 Terminals
Brass
Tin plating
GT5-1P-DS(J)
Note 2
Cream white
Figure i
GT5-1P-DS(J)
GT5-1S-HU(J)
Insulator
PBT
Dark gray
GT5-1P-DS(K)
Note 2
Pastel orange
Figure o
GT5-1P-DS(K)
GT5-1S-HU(K)
Outer terminals
Phosphor bronze
Tin plating
Part Number
Note1: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).
Note2: concept only
34
For inner conductor
Outlines
Finish
Two-position type-Each Single-Conductor coaxial cable
F Connectors
BKeying Configurations
Housing
Figure q
Part Number
CL No.
Color
Material
Figure e
Figure r
Key polarizing USCAR-19
code
Coding
GT5-2S-HU
755-0044-1
Light Gray
Figure q
D2
GT5-2S-HU(A)
755-0059-9
Brown
Figure w
A2
GT5-2S-HU(B)
755-0060-8
Green
Figure e
B2
GT5-2S-HU(C)
755-0097-8
Blue
Figure r
C2
PBT
Figure w
Shown with inserted retainer.
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT-5-2P/S-R).
M Connectors
BRecommended Mounting Bracket dimensions.
Housing[Panel Mounted Housing]
Tin plating
BFully mated connector assemblies
BKeying Configurations
CL No.
Color
Key polarizing
code
GT5-2PP-HU
755-0045-4
Light Gray
Figure q
GT5-2PP-HU(A)
755-0063-6
Brown
Figure w
Part
Material
GT5-2PP-HU(B)
755-0064-9
Green
Figure e
Housing
PBT
-
GT5-2PP-HU(C)
-
Blue
Figure r
Ground terminal
Phosphor bronze
Tin plating
Part Number
Figure q
Figure w
Figure e
Figure r
Finish
Note: Used with separate retainer (GT-5-2P/S-R).
Coding D2 at USCAR-19 is GT5-2PP-HU.
35
Housing
BDiagram of Mated Connector in Use
Part Number
CL No.
Material
Color
GT5N-2PP-HU
755-0055-8
PBT
Light gray
Note 1:Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT-5-2P/S-R).
Retainer – 2 position (Used with GT5-2S-HU, GT5-2PP-HU,
and GT5N-2PP-HU)
Part Number
CL No.
Material
Color
GT5-2P/S-R
755-0046-7
PBT
Dark gray
Housing
BKeying Configurations
Figure q
Figure w
BRecommended Board Mounting
Pattern
Figure e
Figure r
BMounted and fully mated
connector assemblies
Panel
For inner conductor
For outer conductor
Board Thickness : 1.6mm
Part Number
CL No.
Material
Color
Key polarizing USCAR-19
code
Coding
GT5-2P-DS
755-0043-9
Light Gray
Figure q
D2
GT5-2P-DS(A)
755-0061-0
Brown
Figure w
A2
GT5-2P-DS(B)
755-0062-3
Green
Figure e
B2
GT5-2P-DS(C)
-
Blue
Figure r
C2
PBT
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a
board thickness of 1.6 mm).
Coding D2 at USCAR-19 is GT5-2P-DS.
36
GT5-2P-DS (D)
GT5-2P-DS (A)
GT5-2P-DS (B)
Recommended Panel Cut-out
GT5-2P-DS (C)
Power Supply Terminals
( For use with combination type assemblies:
GT5-2/1S-HU, GT5-2/1P-DS, GT5-2/1PP-HU, GT5N-2/1PP-HU)
F Connector Terminals
Part Number
CL No.
GT7-2022SCF
757-0001-1
GT7A-2022SCF
757-0003-7
Material
Copper alloy
Finish
Tin plating
Outer
Diameter
Packaging
#20 to 22
1.4 to 2.4mm
5,000
#20 to 22
2.6 to 3.1mm
3,000
Conductor Size (AWG)
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
M Connector Terminals
Part Number
CL No.
GT7-2022PCF
757-0002-4
GT7A-2022PCF
757-0004-0
Material
Brass
Finish
Tin plating
Outer
Diameter
Packaging
1.4 to 2.4mm
5,000
2.6 to 3.1mm
3,000
Note 1: Sold by the reel. (See above table for number of Packaging.)
Note 2: This component is used only with applicable HRS housings.
37
Combinaton Type (Two Single-Conductor Coaxial Cables + One Power contact)
F Connectors
BShown with inserted retainer.
Housing
Retainer
Part Number
CL No.
Material
Color
GT5-2/1S-HU
755-0009-0
PBT
Light gray
Note 1:Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1S-R).
Retainer (exclusively for GT5-2/1S-HU)
Part Number
CL No.
Material
Color
GT5-2/1S-R
755-0003-4
PBT
Dark gray
M Connectors
BRecommended Board Mounting Pattern
Connector assembly, Printed
Circuit Board mounting
For power supply
For inner conductor
For outside conductor
Thickness :
1.6mm
BRecommended Panel Cut-out
Part Number
CL No.
GT5-2/1P-DS
755-0014-0
Part
Material
Finish
Housing
PBT
Color: Light gray
0. 64x1.1 Terminal
Brass
Tin plating
Insulator
PBT
Dark gray
Outer terminal
Phosphor bronze
Tin plating
Tub terminal for DS 070
Brass
Tin plating
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).
38
Board
M Connectors
BShown with inserted retainer.
Housing - with External Ground
Retainer
Mounting bracket
attachment side
BRecommended Mounting Bracket Dimensions
min.
Outside ground connection
Part Number
CL No.
GT5-2/1PP-HU
755-0008-8
Part
Material
Finish
Housing
PBT
Color: Light gray
Ground terminal
Phosphor bronze
Tin plating
Tin plating finish
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1PP-R ).
Housing - without External Ground
Part Number
CL No.
Material
Color
GT5N-2/1PP-HU
755-0013-8
PBT
Light gray
Note 1: Terminal extraction tool: GT-PO(A)
Note 2: Used with separate retainer GT5-2/1PP-R and mounting bracket GT-BK or GT-BK (01).
Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)
GT5-2 / 1PP-R
Part Number
CL No.
Material
Color
GT5-2/1PP-R
755-0010-0
PBT
Dark gray
39
4-Position – Single conductor Coaxial cable
F Connectors
Part Number
CL No.
Material
Color
USCAR-19
Coding
GT5-4S-HU
755-0056-0
PBT
Light gray
D4
Note: Used with separate retainer (GT-5-4P/S-R).
M Connectors
Part Number
CL No.
Material
Color
USCAR-19
Coding
GT5N-4PP-HU
755-0057-3
PBT
Light gray
D4
Note 1: The product should be used with a low-force insertion/withdrawal M connector
terminal.
Note 2: Used with separate retainer GT-5-4P/S-R.
Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)
40
Part Number
CL No.
Material
Color
GT5-4P/S-R
755-0058-6
PBT
Dark gray
BShown with inserted retainer.
M Connectors
Connector assembly, Printed Circuit
Board Mounting
Part Number
CL No.
USCAR-19
Coding
GT5-4P-DS
755-0087-4
D4
B Recommended Board Mounting Pattern
B Recommended Panel Cut-out
For inner conductors
For outer conductors
Panel Outline
PCB Board Outline
B Recommended Board and Panel installation
M3 Screw
Board
Panel
41
Single Conductor Coaxial Cable - Waterproof Type
F Connectors
Housing
Part Number
CL No.
Material
Color
GT5W-1S-HU
755-0027-2
PBT
Light gray
Note: Specific retainer is determined by the type of the cable used.
Retainer (Used with GT5W-1P-HU, GT5JW-1PP-HU,
GT5W-1S-HU and GT5W-1P-HU)
Part Number
GT5W-1P/S-R
CL No.
755-0028-5
Material
Color
PBT
Dark gray
Silicon rubber Compound
Dark gray
Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS
representative for other diameters.
42
M Connectors
Housing
Part Number
GT5W-1P-HU
CL No.
755-0026-0
Part
Material
Color
Housing
PBT
Light gray
Connector seal
Silicon rubber
White
Note: Use correct retainer.
Housing - Bracket Mounting
BMounted and fully mated connector assemblies
BRecommended Bracket Dimensions
CL No.
A
B
Part
Material
Color
GT5W-1PP-HU
755-0070-1
1.5
1.3
Housing
PBT
Light gray
GT5JW-1PP-HU
755-0069-2
3.2
3.0
Connector seal
Silicon rubber Compound
White
Part Number
43
G Terminals
BCompleted Termination cross section
For Direct Coaxial Cable Termination
1.5D-2V or equivalent
BBoard Termination Pattern
Lands
Part Number
CL No.
Material
Finish
Packaging
GTA-1.6CF
755-0032-2
Brass
Tin plating
1,500 pcs. Per reel
BCompleted Termination cross section
1.5D-2V or equivalent
Pre-solder
Heat-shrink tubing
BBoard Termination Pattern
Part Number
CL No.
Material
Finish
Packaging
GTB-1.6CF
755-0049-5
Brass
Tin plating
1,500 pcs. Per reel
BCompleted Termination cross section
1.5D-2V or equivalent
Heat-shrink tubing
BBoard Termination Pattern
Lands
44
Part Number
CL No.
Material
Finish
Packaging
G-1.6PCF
755-0029-8
Brass
Tin plating
1,500 pcs. Per reel
For Direct Coaxial Cable Termination
BRecommended Board
Termination Pattern
BCompleted Termination Cross Section
Lands
Pre-solder
Part Number
CL No.
Material
Finish
Packaging
GTA-0.7CF
755-0074-2
Brass
Tin plating
1,500 pcs. Per reel
BRecommended Board
Termination Pattern
BRecommended Completed Termination cross
section
Lands
Part Number
CL No.
Material
Finish
Packaging
GTB-0.7CF
755-0075-5
Brass
Tin plating
1,500 pcs. Per reel
For Mid-Cable Termination
Raised point of contact
BRecommended Panel Cut-out
BAttachment Diagram
Panel
Part Number
CL No.
Material
Finish
Packaging
GT-1.6PG-C
755-0031-0
Brass
Tin plating
1
For use with coaxial cables 2.9
to 3.4 mm. outside diameter.
Setscrew (M2.5)
45
Bottom Shield cover
For Improved Electronic Noise Compatibility
Mounted Condition Installed
Part Number
CL No.
Material
Finish
GT5-1P/S-CSB
755-0048-2
Brass
Tin plating
Top Shield covers
Mounted Condition Installed
46
Part Number
CL No.
GT5C-1P-CSB
755-0088-7
Panel Mounting In-line Bracket
GT-BK
GT-BK (01)
Part Number
GT-BK
CL No.
Material
751-0039-6
Finish
Used with connectors
Tin plating
GT5-1PP-HU(A),GT5-1PP-HU(B),GT5-1PPHU(C),GT5-1PP-HU(D),GT5-1PP-HU(E),GT5-1PP-
SPCC
GT-BK(01)
751-0039-6-01
HU(F),GT5-1PP-HU(G),GT5-1PP-HU(H),GT5Zinc plating
2/1PP-HU,GT5-2/1PP-HU(A),GT5-2/1PP-HU(A)
B Termination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Automatic crimping machine
Specifications
Item
Specification
Specification
1.5tons
Stroke length
30mm
Number of strokes
200spm(50Hz)
Weight
75kg
Motor
0.2kW
Crimping speed
Remarks
200spm(60Hz)
AC100V
2000 to 4000pcs. Per day
Part Number CM-105
* Crimp height setting tables are available for each cable type. Please contact your
nearest Hirose Electric account representative.
Different cables will require different crimp height settings.
47
Similar pages