PHILIPS AV162827DGG 20-bit buffer/line driver, non-inverting, with 30ohm termination resistors 3-state Datasheet

INTEGRATED CIRCUITS
74ALVT162827
20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
Product specification
Supersedes data of 1997 May 01
IC23 Data Handbook
1998 Feb 13
Philips Semiconductors
Product specification
2.5V/3.3V 20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
FEATURES
74ALVT162827
DESCRIPTION
• Multiple VCC and GND pins minimize switching noise
• 5V I/O Compatible
• Live insertion/extraction permitted
• 3-State output buffers
• Outputs include series resistance of 30Ω making external
The 74ALVT162827 high-performance BiCMOS device combines
low static and dynamic power dissipation with high speed and high
output drive. It is designed for VCC operation at 2.5V or 3.3V with I/O
compatibility to 5V.
The 74ALVT162827 20-bit buffers provide high performance bus
interface buffering for wide data/address paths or buses carrying
parity. They have NOR Output Enables (nOE1, nOE2) for maximum
control flexibility.
termination resistors unnecessary
• Power-up 3-State
• Output capability: +12mA/–12mA
• Latch-up protection exceeds 500mA per Jedec Std 17
• ESD protection exceeds 2000 V per MIL STD 883 Method 3015
The 74ALVT162827 is designed with 30Ω series resistance in both
the pull-up and pull-down output structures. This design reduces line
noise in applications such as memory address drivers, clock drivers
and bus receivers/transmitters.
and 200 V per Machine Model
• Bus hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
QUICK REFERENCE DATA
SYMBOL
TYPICAL
CONDITIONS
Tamb = 25°C
PARAMETER
UNIT
2.5V
3.3V
2.7
2.3
2.2
2.0
ns
tPLH
tPHL
Propagation delay
nAx to nBx or nBx to nAx
CL = 50pF
CIN
Input capacitance DIR, OE
VI = 0V or VCC
3
3
pF
COut
Output capacitance
VI/O = 0V or VCC
9
9
pF
ICCZ
Total supply current
Outputs disabled
40
70
µA
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
OUTSIDE NORTH AMERICA
NORTH AMERICA
DWG NUMBER
56-Pin Plastic SSOP Type III
–40°C to +85°C
74ALVT162827 DL
AV162827 DL
SOT371-1
56-Pin Plastic TSSOP Type II
–40°C to +85°C
74ALVT162827 DGG
AV162827 DGG
SOT364-1
PIN DESCRIPTION
PIN NUMBER
SYMBOL
55, 54, 52, 51, 49, 48, 47, 45, 44, 43,
42, 41, 40, 38, 37, 36, 34, 33, 31, 30
1A0 - 1A9
2A0 - 2A9
Data inputs
2, 3, 5, 6, 8, 9, 10, 12, 13, 14,
15, 16, 17, 19, 20, 21, 23, 24, 26, 27
1Y0 - 1Y9
2Y0 - 2Y9
Data outputs
1, 56,
28, 29
1OE0, 1OE1
2OE0, 2OE1
4, 11, 18, 25, 32, 39, 46, 53
GND
Ground (0V)
7, 22, 35, 50
VCC
Positive supply voltage
1998 Feb 13
FUNCTION
Output enable inputs (active-Low)
2
853-1843 18961
Philips Semiconductors
Product specification
2.5V/3.3V 20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
PIN CONFIGURATION
LOGIC SYMBOL (IEEE/IEC)
1
56
1OE1
1Y0
2
55
1A0
56
1Y1
3
54
1A1
28
GND
4
53
GND
29
1Y2
5
52
1A2
1Y3
6
51
1A3
VCC
7
50
1Y4
8
1Y5
1OE1
EN2
2
1∇
1
3
VCC
52
5
49
1A4
51
6
9
48
1A5
49
8
1Y6
10
47
1A6
48
9
GND
11
46
GND
47
10
1Y7
12
45
1A7
45
12
1Y8
13
44
1A8
44
13
1Y9
14
43
1A9
43
14
2Y0
15
42
2A0
42
2Y1
16
41
2A1
41
16
2Y2
17
40
2A2
40
17
GND
18
39
GND
38
19
2Y3
19
38
2A3
37
20
2Y4
20
37
2A4
36
21
2Y5
21
36
2A5
34
23
VCC
22
35
VCC
33
24
2Y6
23
34
2A6
31
26
2Y7
24
33
2A7
30
27
GND
25
32
GND
2Y8
26
31
2A8
2Y9
27
30
2A9
2OE0
28
29
2OE1
54
52
51
49
48
47
1A0 1A1 1A2 1A3 1A4 1A5 1A6
56
&
54
45
2∇
1
15
SH00012
FUNCTION TABLE
INPUTS
LOGIC SYMBOL
1OE0
EN1
55
SH00010
1
&
1
1OE0
nOEx
55
74ALVT162827
44
1A7 1A8
X
Z
H
L
43
1A9
OUTPUTS
nAx
OPERATING MODE
nYx
L
L
L
L
H
H
Transparent
H
X
Z
High impedance
=
=
=
=
Transparent
Don’t care
High impedance “off” state
High voltage level
Low voltage level
SCHEMATIC OF EACH OUTPUT
1Y0 1Y1 1Y2 1Y3 1Y4 1Y5 1Y6
1Y7 1Y8
1Y9
2
3
5
6
8
9
10
12
13
14
42
41
40
38
37
36
34
33
31
30
VCC
VCC
27Ω
2A0 2A1 2A2 2A3 2A4 2A5 2A6
28
2OE0
29
2OE1
2A7 2A8
2A9
OUTPUT
27Ω
2Y0 2Y1 2Y2 2Y3 2Y4 2Y5 2Y6
2Y7 2Y8
2Y9
15
24
27
16
17
19
20
21
23
26
SH00011
1998 Feb 13
SW00206
3
Philips Semiconductors
Product specification
2.5V/3.3V 20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
74ALVT162827
LOGIC DIAGRAM
nA0
nA1
nA2
nA3
nA4
nA5
nA6
nA7
nA8
nA9
nY0
nY1
nY2
nY3
nY4
nY5
nY6
nY7
nY8
nY9
nOE0
nOE1
SH00013
ABSOLUTE MAXIMUM RATINGS1, 2
PARAMETER
SYMBOL
VCC
IIK
CONDITIONS
RATING
UNIT
-0.5 to +7.0
V
-18
mA
-1.2 to +7.0
V
VO < 0
-50
mA
DC supply voltage
DC input diode current
VI < 0
voltage3
VI
DC input
IOK
DC output diode current
VOUT
DC output voltage3
output in Off or High state
-0.5 to +5.5
V
IOUT
DC output current
output in Low state
128
mA
Tstg
Storage temperature range
-65 to 150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
2.5V RANGE LIMITS
SYMBOL
VCC
3.3V RANGE LIMITS
PARAMETER
UNIT
DC supply voltage
MIN
MAX
MIN
MAX
2.3
2.7
3.0
3.6
V
0
5.5
0
5.5
V
VI
Input voltage
VIH
High-level input voltage
VIL
Input voltage
0.7
0.8
V
IOH
High-level output current
–8
–12
mA
IOL
Low-level output current
12
12
mA
∆t/∆v
Input transition rise or fall rate; Outputs enabled
10
10
ns/V
Tamb
Operating free-air temperature range
+85
°C
1998 Feb 13
1.7
–40
4
2.0
+85
–40
V
Philips Semiconductors
Product specification
2.5V/3.3V 20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
74ALVT162827
DC ELECTRICAL CHARACTERISTICS (3.3V 0.3V RANGE)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN
VIK
Input clamp voltage
VCC = 3.0V; IIK = –18mA
VOH
High-level output voltage
VCC = 3.0V; IOH = –12mA
VOL
Low–level output voltage
VCC = 3.0V; IOL = 12mA
VCC = 3.6V; VI = VCC or GND
II
Input
In
ut leakage current
VCC = 3
3.6V;
6V; VI = VCC
IHOLD
Off current
Control pins
VCC = 0 or 3.6V;
3 6V; VI = 5
5.5V
5V
Data
VCC = 3.6V; VI = 0
IOFF
2.0
pins
ins4
VCC = 0V; VI or VO = 0 to 4.5V
Bus Hold current
Data in
inputs
uts6
TYP1
MAX
–0.85
–1.2
UNIT
V
2.3
V
0.5
0.8
0.1
±1
01
0.1
10
05
0.5
1
0.1
-5
0.1
±100
V
µA
µA
VCC = 3V; VI = 0.8V
75
130
µA
VCC = 3V; VI = 2.0V
–75
–140
µA
VCC = 0V to 3.6V; VCC = 3.6V
±500
µA
Current into an output in the
High state when VO > VCC
VO = 5.5V; VCC = 3.0V
10
125
µA
Power up/down 3-State output
current3
VCC ≤ 1.2V; VO = 0.5V to VCC; VI = GND or VCC
OE/OE = Don’t care
1
±100
µA
IOZH
3-State output High current
VCC = 3.6V; VO = 3.0V; VI = VIL or VIH
0.5
5
µA
IOZL
3-State output Low current
VCC = 3.6V; VO = 0.5V; VI = VIL or VIH
0.5
–5
µA
VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0
0.07
0.1
VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0
3.9
5.5
0.07
0.1
0.04
0.4
IEX
IPU/PD
ICCH
ICCL
Quiescent supply current
ICCZ
∆ICC
VCC = 3.6V; Outputs Disabled; VI = GND or VCC, IO =
Additional supply current per
input pin2
05
VCC = 3V to 3.6V; One input at VCC–0.6V,
Other inputs at VCC or GND
mA
mA
NOTES:
1. All typical values are at VCC = 3.3V and Tamb = 25°C.
2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND
3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 3.3V ± 0.3V a
transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only.
4. Unused pins at VCC or GND.
5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground.
6. This is the bus hold overdrive current required to force the input to the opposite logic state.
AC CHARACTERISTICS (3.3V 0.3V RANGE)
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω
LIMITS
SYMBOL
PARAMETER
Tamb = -40 to +85oC
VCC = +3.3V ±0.3V
WAVEFORM
UNIT
MIN
TYP
MAX
tPLH
tPHL
Propagation delay
nAx to nYx
1
1.0
1.0
2.2
2.0
3.3
3.0
ns
tPZH
tPZL
Output enable time
to High and Low level
2
1.5
1.0
3.4
2.4
5.6
3.7
ns
tPHZ
tPLZ
Output disable time
from High and Low level
2
1.5
1.0
3.4
2.7
5.2
4.5
ns
1998 Feb 13
5
Philips Semiconductors
Product specification
2.5V/3.3V 20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
74ALVT162827
DC ELECTRICAL CHARACTERISTICS (2.5V 0.2V RANGE)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Temp = -40°C to +85°C
MIN
VIK
Input clamp voltage
VCC = 2.3V; IIK = –18mA
VOH
High-level output voltage
VCC = 2.3V; IOH = –8mA
VOL
Low-level output voltage
VCC = 2.3V; IOL = 12mA
Input
In
ut leakage current
–0.85
–1.2
UNIT
V
2.3
V
0.7
0.1
±1
VCC = 0 or 2.7V; VI = 5.5V
0.1
10
VCC = 2.7V; VI = VCC
0.1
1
0.1
-5
100
Control pins
Data pins
ins4
VCC = 2.7V; VI = 0
IOFF
MAX
0.5
VCC = 2.7V; VI = VCC or GND
II
1.7
TYP1
V
µA
µA
Off current
VCC = 0V; VI or VO = 0 to 4.5V
0.1
Bus Hold current
VCC = 2.3V; VI = 0.7V
115
Data inputs6
VCC = 2.3V; VI = 1.7V
–10
Current into an output in the
High state when VO > VCC
VO = 5.5V; VCC = 2.3V
10
125
µA
Power up/down 3-State output
current3
VCC ≤ 1.2V; VO = 0.5V to VCC; VI = GND or VCC;
OE/OE = Don’t care
1
100
µA
IOZH
3-State output High current
VCC = 2.7V; VO = 2.3V; VI = VIL or VIH
0.5
5
µA
IOZL
3-State output Low current
VCC = 2.7V; VO = 0.5V; VI = VIL or VIH
0.5
–5
µA
VCC = 2.7V; Outputs High, VI = GND or VCC, IO = 0
0.04
0.1
VCC = 2.7V; Outputs Low, VI = GND or VCC, IO = 0
3.5
5.0
VCC = 2.7V; Outputs Disabled; VI = GND or VCC, IO = 05
0.04
0.1
VCC = 2.3V to 2.7V; One input at VCC–0.6V,
Other inputs at VCC or GND
0.04
0.4
IHOLD
IEX
IPU/PD
ICCH
ICCL
Quiescent supply current
ICCZ
∆ICC
Additional supply current per
input pin2
µA
mA
mA
NOTES:
1. All typical values are at VCC = 2.5V and Tamb = 25°C.
2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND
3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 2.5V ± 0.2V a
transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only.
4. Unused pins at VCC or GND.
5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground.
6. Not guaranteed.
AC CHARACTERISTICS (2.5V 0.2V RANGE)
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω
LIMITS
SYMBOL
PARAMETER
Tamb = -40 to +85oC
VCC = +2.5V ±0.2V
WAVEFORM
UNIT
MIN
TYP
MAX
tPLH
tPHL
Propagation delay
nAx to nYx
1
1.5
1.5
2.7
2.3
4.5
3.5
ns
tPZH
tPZL
Output enable time
to High and Low level
2
2.5
1.5
4.7
2.9
7.5
4.7
ns
tPHZ
tPLZ
Output disable time
from High and Low level
2
1.5
1.0
3.2
2.4
5.2
4.0
ns
1998 Feb 13
6
Philips Semiconductors
Product specification
2.5V/3.3V 20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
74ALVT162827
AC WAVEFORMS
VM = 1.5V for VCC w 3.0V; VM = VCC/2 for VCC v 2.7V
VX = VOL + 0.3V for VCC w 3.0V; VX = VOL + 0.15V for VCC v 2.7V
VY = VOH – 0.3V for VCC w 3.0V; VY = VOH – 0.15V for VCC v 2.7V
3.0V or VCC
whichever
is less
3.0V or VCC
whichever
is less
nAx INPUT
nOEx
INPUT
VM
VM
0V
tPZL
0V
tPLH
VM
V
M
tPLZ
3.0V or VCC
tPHL
nYx
OUTPUT
VOH
VM
VM
nYx
OUTPUT
VM
tPHZ
tPZH
VX
VOL
VOH
VY
VOL
nYx
OUTPUT
VM
0V
SW00174
SA00016
Waveform 1. Input (nAx) to Output (nYx) Propagation Delays
Waveform 2. 3-State Output Enable and Disable Times
TEST CIRCUIT AND WAVEFORM
6.0V or VCC x 2
VCC
Open
VIN
VOUT
PULSE
GENERATOR
tW
90%
RL
GND
VM
NEGATIVE
PULSE
10%
0V
tTHL (tF)
CL
tTLH (tR)
tTLH (tR)
RL
90%
POSITIVE
PULSE
Test Circuit for 3-State Outputs
tTHL (tF)
VIN
90%
VM
VM
10%
10%
tW
SWITCH POSITION
TEST
tPLZ/tPZL
6V or VCC x 2
Open
tPHZ/tPZH
GND
0V
VM = 1.5V or VCC/2 whichever is less
Input Pulse Definition
SWITCH
tPLH/tPHL
VIN
VM
10%
D.U.T.
RT
90%
INPUT PULSE REQUIREMENTS
DEFINITIONS
FAMILY
Amplitude
RL = Load resistor; see AC CHARACTERISTICS for value.
CL = Load capacitance includes jig and probe capacitance:
See AC CHARACTERISTICS for value.
74ALVT16
Rep. Rate
3.0V or VCC
whichever v10MHz
is less
tW
500ns
tR
tF
v2.5ns v2.5ns
RT = Termination resistance should be equal to ZOUT of
pulse generators.
SW00025
1998 Feb 13
7
Philips Semiconductors
Product specification
20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm
1998 Feb 13
8
74ALVT162827
SOT371-1
Philips Semiconductors
Product specification
20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm
1998 Feb 13
9
74ALVT162827
SOT364-1
Philips Semiconductors
Product specification
20-bit buffer/line driver, non-inverting,
with 30Ω termination resistors (3-State)
74ALVT162827
Data sheet status
Data sheet
status
Product
status
Definition [1]
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
 Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Document order number:
yyyy mmm dd
10
Date of release: 05-96
9397-750-03651
Similar pages