NKK JWL12RH1A-H General specification Datasheet

Series JW
Rockers
Toggles
General Specifications
B
Electrical Capacity (Resistive Load)
Power Level: 10A @ 125/250V AC for JWM & JWMW models; 10A @ 30V DC for JWMW;
16A @ 125/250V AC for JWL & JWLW models; 5A @ 72V DC for telecommunication applications
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Other Ratings
Slides
High Inrush 10 & 16 Amp Rockers
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Angle of Throw:
Materials & Finishes
Rocker:
Housing/Frame & Barrier:
Interior Seal for JWM & JWL:
Case/Base:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Sealing:
Installation
Soldering Time & Temperature:
10 milliohms maximum for JWM & JWMW; 20 milliohms maximum for JWL & JWLW
1,000 megohms minimum @ 500V DC
2,000V AC minimum between contacts for 1 minute minimum;
4,000V AC minimum between contacts & case for 1 minute minimum
25,000 operations minimum
25,000 operations minimum
JWM & JWMW Single Pole 3.92N & Double Pole 7.84N
JWL Single Pole 5.00N & Double Pole 10.00N; JWLW Double Pole 10.00N
26°
Polyphenylene ether (UL94V-0)
Contacts:
Polyamide (UL94V-0)
Polyphenylene sulfide (UL94V-0)
Melamine (UL94V-0)
Terminals:
JWM & JWMW: Silver alloy with silver plating
JWL & JWLW: Silver alloy plus copper with
silver plating
Brass with silver plating
–25°C through +70°C (–13°F through +158°F) for JWM & JWL;
–25°C through +85°C (–13°F through +185°F) for panel seal JWMW & JWLW models
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
IP67 of IEC60529 standard for panel seal JWMW & JWLW models; dust resistant inner seal for others
Manual Soldering: See Profile A in Supplement section.
Touch
Models below recognized only when ordered with marking on switch.
JWMW: add “/U” to end of part number to order UL mark on switch; add “/CUL” to end of part
number to order cULus mark on switch.
JWL: add “/U-DC” to end of part number to request UL rating on DC rated switch.
CSA:
VDE:
Supplement
UL: File No. E44145
JWM & JWMW models recognized at 10A @ 250V AC.
JWMW recognized at 10A @ 30V DC.
JWL & JWLW models recognized at 16A @ 250V AC; JWL at 5A @ 72V DC.
Indicators
Flammability Standards: UL94V-0 for rocker, housing, seal & case/base of JWL, JWM, JWMW & JWLW models
TV Ratings for UL & CSA: JWM (TV-5) Overload Test @ 120V AC for 50 operations:
Steady State Current (rms) 7.5A; Minimum Inrush Current (peak) 111A.
JWM (TV-5) Endurance Test @ 120V AC for 25,000 operations:
Steady State Current (rms) 5A; Minimum Inrush Current (peak) 78A.
JWL (TV-8) Overload Test @ 120V AC for 50 operations:
Steady State Current (rms) 12A; Minimum Inrush Current (peak) 163A.
JWL (TV-8) Endurance Test @ 120V AC for 25,000 operations:
Steady State Current (rms) 8A; Minimum Inrush Current (peak) 117A.
Accessories
Tilt
Tactiles
Standards & Certifications
B40
File No. 023535_0_000
JWM & JWMW models certified at 10A @ 250V AC; JWL models certified at 16A @ 250V AC
License No. 115674
JWM models approved at steady state 5A, inrush 80A, resistive 10A, & motor load 6A all at
250V AC; JWL models approved at steady state inrush 128A, resistive 16A, & motor load 8A
all at 250V AC.
Note: JWM & JWL Double Pole, Single Throw models approved only with the international
ON-OFF symbols on the actuator.
www.nkkswitches.com
Series JW
Toggles
Distinctive Characteristics
B
Pushbuttons
Industry’s first molded rocker with TV rating. Designed to handle large inrush current,
with high electrical capacity of 10 and 16 Amps. JWM models certified for TV-5 rating
and JWL models for TV-8 rating.
Rockers
High Inrush 10 & 16 Amp Rockers
Programmable Illuminated PB
JWMW and JWLW panel seal versions meet IP67 of
IEC60529 Standards (similar to NEMA 4 and 6).
Prominent external insulating barriers increase
insulation resistance and dielectric strength.
Keylocks
Uniquely constructed to break light
contact welds.
Increased electrical life with specially
designed plate to minimize contact bounce.
Rotaries
Constructed for dust resistance with interior
cover between actuator and contact area.
Slides
Terminals are molded in and epoxy sealed to
lock out flux, dust, and other contaminants.
Tactiles
Solder lug/quick connect terminals can be used
with connector.
Tilt
Housing and case of heat resistant resin meet UL94V-0 standard.
Supplement
Accessories
Indicators
Touch
Actual Size JWM
www.nkkswitches.com
B41
High Inrush 10 & 16 Amp Rockers
TYPICAL SWITCH ORDERING EXAMPLE
JW
B
LW
2
1
R
A
1
Ratings
A
Housing Colors
Barrier Types
M
10A @ 125/250V AC
MW
Panel Seal
10A @ 125/250V AC
R
L
16A @ 125/250V AC
B
LW
Panel Seal
16A @ 125/250V AC
Note: JWMW & JWLW
combine with code R only.
Note: JWMW & JWLW
available with black only.
Cap Colors
Barrier Colors
Poles
1
SPST
SPDT
2
DPST
DPDT
OFF
2
ON
NONE
ON
B
Ivory
With Barrier
H
Gray
Black
A
Black
B
Ivory
B
Ivory
C
Red
H
Gray
H
Gray
Inscription
Orientation
Circuits
NONE
No Barrier
A
No
Code
ON
Black
Note: JWMW & JWLW available with black or red caps only.
Notes:
DPST must have international
ON-OFF symbols for VDE
approval.
JWLW available in DPST &
DPDT only.
1
A
IMPORTANT:
No Inscription
1
Horizontal
2
Vertical
Standard markings for JWM & JWL:
TV Rating, UL, CSA & VDE.
Standard marking for JWLW: cULus.
Specific models, ratings & ordering
instructions for international approvals
are noted on General Specifications page.
These are inscriptions for
Single Throw models only.
Tilt
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series JW
Touch
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
JWLW21RA1A
Accessories
Indicators
Black Rocker Cap with
International ON-OFF Symbols
in Horizontal Orientation
Black Housing
Supplement
DPST
ON-NONE-OFF Circuit
B42
16A @ 125/250V AC
www.nkkswitches.com
Series JW
Power Level
10A @ 125/250V AC
MW
Panel Seal
Power Level
10A @ 125/250V AC
L
Power Level
16A @ 125/250V AC
LW
Panel Seal
Power Level
16A @ 125/250V AC
POLES & CIRCUITS
Rocker Position
Connected Terminals
Throw & Schematics
Note: Terminal numbers are not actually
on the switch. Actuator positions oriented
with switch part number facing front.
Down
Center
Up
Down
Center
Up
JWM11
JWMW11
JWL11
ON
NONE
OFF
1-1b
OPEN
OPEN
SP
JWM12
JWMW12
JWL12
ON
NONE
ON
1-1b
OPEN
1-1a
SPDT
DP
JWM21
JWMW21
JWL21
JWLW21
ON
NONE
OFF
1-1b
2-2b
OPEN
OPEN
DPST
JWM22
JWMW22
JWL22
JWLW22
ON
1-1b
2-2b
OPEN
SP
DP
1 (COM)
SPST
1b
1 (COM)
NONE
ON
1a
1
1b
(COM)
2
1b
1
1-1a
2-2a
DPDT
Keylocks
Model
2b
(COM)
1a
1b
2
2a
Rotaries
Pole
B
Pushbuttons
M
Programmable Illuminated PB
RATINGS
Rockers
Toggles
High Inrush 10 & 16 Amp Rockers
2b
B
No Barrier
With Barrier
Tactiles
R
Slides
BARRIER TYPES & COLORS
Tilt
Barrier type designates that either AT217 (for JWM) or
AT218 (for JWL) is factory assembled.
Dimensions for barriers are shown in the Accessories section.
Barrier Colors
Available:
JWMW and JWLW panel seal devices have exterior seal
of acrylonitrile butadiene rubber covering the flange.
Finish: Matte
A
B
Black
Barrier Material: Polyamide
H
Ivory
Gray
Indicators
No-barrier type has a flat flange
which is an integral part of the switch.
Flange/Housing Material: Polyamide
JWL
Finish: Matte
CAP COLORS
Cap Colors
Available:
Cap Material: Polyphenelene Oxide
Finish: Matte
A
Black
B
Ivory
C
Red
H
Gray
Rocker cap is an integral part of the switch and not available separately.
JWMW and JWLW available with black or red caps only.
www.nkkswitches.com
Touch
JWM
B43
Accessories
JWL
Supplement
JWM
Series JW
INSCRIPTIONS
No Code
B
Programmable Illuminated PB
Keylocks
Inscription for
Horizontal Mounting
1
No Inscription
Pushbuttons
Rockers
Toggles
High Inrush 10 & 16 Amp Rockers
DPST models without inscriptions
do not have VDE approval.
2
Inscription for
Vertical Mounting
The IEC symbols for On-Off are supplied with Single Throw models only.
Orientation of inscription must be selected.
Inscription Colors: Black ink on Ivory or Gray cap. White ink on Black or Red cap.
Contact factory for other inscriptions.
HOUSING
Material: Polyamide
Colors
Available:
Finish: Matte
JWMW and JWLW panel seal models available with black housing only.
A
B
Black
Ivory
H
Gray
Rotaries
TERMINALS
Solder Lug/Quick Connect .110” (2.8mm)
Slides
Epoxy Seal
(3.2)
.126 (7.5)
.295
Epoxy Seal
JWL & JWLW
(0.6) R
(2.8)
.024
.110
(1.6)
.063
Thk = (0.5)
.020
Tactiles
JWM & JWMW
Solder Lug/Quick Connect .187” (4.75mm)
(7.5)
.295
(1.5) R
.059
(0.65) R
.026
Thk = (0.8)
.031
(4.75)
.187
PANEL CUTOUTS
Touch
Tilt
Panel Thickness Range
Without Barrier (JWM & JWMW):
.039” ~ .157” (1.0mm ~ 4.0mm)
With Barrier (JWM):
.024” ~ .126” (0.6mm ~ 3.2mm)
(25.0)
.984
(24.0)
.945
JWM
JWMW
(15.4)
.606
Panel Thickness Range
Without Barrier (JWL & JWLW):
.039” ~ .157” (1.0mm ~ 4.0mm)
With Barrier (JWL):
.024” ~ .126” (0.6mm ~ 3.2mm)
Supplement
Accessories
Indicators
(15.4)
.606
JWL
JWLW
(20.5)
.807
B44
(30.7)
1.209
(29.5)
1.161
www.nkkswitches.com
(20.5)
.807
Toggles
Series JW
High Inrush 10 & 16 Amp Rockers
TYPICAL SWITCH DIMENSIONS FOR JWM & JWMW
No Barrier • 10 Amp
B
(16.4)
.646
COM
2a
(0.5) Typ
.020
(2.0)
.079
(21.5)
.846
(27.0)
1.063
1a
(2.8) Typ
.110
(6.2)
.244
(15.4)
.606
(7.5)
.295
JWM11RC1A
Single & Double Pole
With Barrier • 10 Amp
2b
1b
2
1
COM
COM
1a
2a
(0.5) Typ
.020
(13.6)
.535 (18.0)
.709
(22.2)
.874
(7.2)
.283
(18.9)
.744
(2.8) Typ
.110
(6.2)
.244
(15.4)
.606
(7.5)
.295
(30.0)
1.181
JWM11BCA-H
Single & Double Pole
Panel Seal • No Barrier • 10 Amp
(15.0)
.591
(7.0)
.276
Touch
Part No.
Slides
(7.7) Typ
.303
(22.6)
.890
(25.0)
.984
Rotaries
(15.0)
.591
Part No.
(19.6)
.772
Pushbuttons
1
COM
Tactiles
(13.6)
.535
(18.0)
.709
1b
Programmable Illuminated PB
26°
2b
2
Keylocks
(7.7) Typ
.303 (22.6)
.890
Tilt
(19.6)
.772
(15.0)
.591
(6.0)
.236
Part No.
Rockers
Single & Double Pole
(16.4)
.646
1b
1
COM
COM
2a
1a
(0.5) Typ
.020
(13.6)
.535
(21.0)
.827
(3.0)
.118
(21.5)
.846
(6.2)
.244
(15.4)
.606
(7.5)
.295
(29.6)
1.165
Indicators
26°
2b
2
(2.8) Typ
.110
Accessories
(7.7) Typ
.303
(22.6)
.890
JWMW22RCA
Supplement
(19.6)
.772
Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.
www.nkkswitches.com
B45
Toggles
Series JW
High Inrush 10 & 16 Amp Rockers
TYPICAL SWITCH DIMENSIONS FOR JWL & JWLW
Single & Double Pole
B
(24.4)
.961
(20.0)
.787
(9.8) Typ
.386
(28.0)
1.102
26°
2b
1b
2
1
COM
(20.2)
.795
Programmable Illuminated PB
Keylocks
(7.0)
.276
Part No.
Pushbuttons
Rockers
No Barrier • 16 Amp
(32.0)
1.260
COM
2a
1a
(0.8) Typ
.031
(17.6)
.693
JWL21RC2A
(4.75) Typ
.187
(2.0)
.079
(23.0)
.906
(24.0)
.945
(9.0)
.354
(20.5)
.807
(7.5)
.295
Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.
With Barrier • 16 Amp
Single & Double Pole
(20.0)
.787
Rotaries
Part No.
(24.4)
.961
(9.8) Typ
.386
(28.0)
1.102
(29.0)
1.142
2b
1b
2
1
Slides
2a
(0.8) Typ
.031
(17.6)
.693
Tactiles
(23.0)
.906
(27.2)
1.071
(21.4)
.843
1a
(4.75) Typ
.187
(9.0)
.354
(20.5)
.807
(7.5)
.295
Single pole double throw models do not have terminals 2a, 2, & 2b; single throw models do not have 1a & 2a.
Tilt
JWL11BCA-H
(8.15)
.321
(35.0)
1.378
COM
COM
Double Pole Single Throw
Touch
Panel Seal • 16 Amp • Inscription
(7.9)
.311
Part No.
(4.75) Typ
.187
Indicators
(0.8) Typ
.031
(9.8)
.386
(24.4)
.961
2b
1b
2
1
(28.0)
1.102
26°
(37.3)
1.469
COM
Accessories
(20.2)
.795
2a
Supplement
(17.6)
.693
(27.0)
1.063
(2.7)
.106
JWLW21RA1A
B46
www.nkkswitches.com
COM
(21.3)
.839
(7.5)
.295
1a
(9.0)
.354
(20.0)
.787
Series JW
Toggles
High Inrush 10 & 16 Amp Rockers
TYPICAL SWITCH DIMENSIONS FOR JWLW
Panel Seal • 16 Amp • No Inscription
(7.9)
.311
B
(4.75) Typ
.187
26°
2b
1b
2
1
(37.3)
1.469
COM
(20.2)
.795
2a
1a
(9.0)
.354
(20.0)
.787
(17.6)
.693
(27.0)
1.063
COM
(2.7)
.106
(21.3)
.839
Programmable Illuminated PB
(24.4)
.961
(9.8) Typ
.386
(28.0)
1.102
Pushbuttons
(0.8) Typ
.031
(7.5)
.295
JWLW22RAA
Keylocks
OPTIONAL DUST COVER
AT4126
Dust Cover for JWL Rocker
Recommended Temperature Range:
Lid: Clear Polyvinyl Chloride
Base: Black Polyamide
–10° ~ +70°C (+14°F ~ +158°F)
Loses pliability below 0°C (+32°F)
Slides
Materials:
Rotaries
When installed, the Dust Cover protects the switch from an environment containing
small particles and dust. The switch is operable with the Dust Cover in place.
Tactiles
Recommended Panel Thickness:
.031” ~ .134” (0.8mm ~ 3.4mm)
Tilt
Assembly Instructions:
1. Insert bottom of switch through the base until
the tabs lock into place.
(42.0)
1.654
Touch
2. Snap the switch into the panel.
(22.2)
.874
Top
(8.6)
.339
(2.6)
.102
Side
Indicators
3. Seat the lid into the grooves of the base.
Groove
(33.0)
1.299
Bottom
Lid
Base
Switch
Notes
Supplement
1. The dust cover is not for use with JWLW.
Groove
2. The dust cover cannot be used with the barrier option.
www.nkkswitches.com
Accessories
Part No.
Rockers
Double Pole Double Throw
B47
Toggles
Series JW
High Inrush 10 & 16 Amp Rockers
PRECAUTIONS FOR HANDLING & STORAGE FOR JWMW/LW (PANEL SEAL TYPES)
B
• Do not install switch where heavy dust collection occurs. Dust build-up under rocker may affect switch actuation.
• Do not actuate switch if submerged in water or oil.
30°
• Installation is not recommended on horizontal surface in an environment where frequent splashing of
water may occur. In such an environment, a minimum 30° angle installation is advisable. If there is
a possibility of freezing, install vertically so no moisture will be retained within switch housing.
Panel Mounting
Incorrect
Correct
• Before snapping a switch into the panel, align the gasket evenly under bezel of the switch.
• When mounting into a panel, apply equal pressure to sides of bezel and insert parallel to panel.
• After mounting a switch, be sure there are no gaps between switch and panel.
Lightly push into panel.
• After installing into panel, do not apply excessive force.
• After panel installation and wiring is completed, do not apply force horizontally
or vertically from behind panel.
• Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint to collect in
corners of cutout to prevent level mounting.
• Avoid reinstalling a switch once it has been mounted in a panel. This may cause deterioration of panel sealability.
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Operating Environment
B48
www.nkkswitches.com
Clean Edges
Similar pages