GBJ606U GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 600 Volts - 6.0 Amperes GBJ FEATURES ●Rating to 600V PRV ? .134(3.4) ? .122(3.1) .189(4.8) .173(4.4) .150(3.8) .134(3.4) 1.193(30.3) 1.169(29.7) ●Low forward voltage drop,high current capability ●Reliable low cost construction utilizing molded plastic classification 94V-0 .165(4.2) .142(3.6) .708(18.0) .669(17.0) .106(2.7) .096(2.3) ~ ~ _ + .441(11.2) .425(10.8) .118(3.0)*45° ●The plastic material has U/L flammability .198 MAX (5.1) .800(20.3) .776(19.7) technique results in inexpensive product .094(2.4) .078(2.0) .043(1.1) .035(0.9) ? .134(3.4) ? .122(3.1) ● Ideal for printed circuit board .114(2.9) .098(2.5) .031(0.8) .023(0.6) .402(10.2) .303(7.7).303(7.7) SPACING .386(9.8) .287(7.3).287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL GBJ606U UNIT Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V VDC 600 V Maximum DC Blocking Voltage Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=100℃ (without heatsink) Peak Forward Surge Current 8.3ms Single Half Sine-Wave I(AV) 6.0 3.3 A IFSM 175 A VF 0.89 V VF 0.9 V Super Imposed on Rated Load (JEDEC Method) Typical Forward Voltage at 3.0A DC Maximum Forward Voltage at 3.0A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ IR 10.0 500 μA I2t Rating for Fusing (t<8.3ms) I2t 127 A2s Typical Junction Capacitance Per Element (Note1) CJ 55 pF RθJC 1.8 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm Cu plate heatsink. 3.The typical data above is for reference only(典型值仅供参考). REV. 2, 18-Aug-2015 RATING AND CHARACTERTIC CURVES GBJ606U FLG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 180 WITH HEATSINK PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 6.0 5.0 4.0 WITHOUT HEATSINK 3.0 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 0.00 0.1 0 20 40 60 100 80 120 140 160 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 120 80 40 0 1 CASE TEMPERATURE, °C 10 5 2 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 20.0 100 INSTANTANEOUS FORWARD CURRENT, AMPERES CAPACITANCE,(pF) 10.0 10 TJ=25°C,f=1MHZ 1.0 1.0 10.0 1.0 0.1 TJ=25°C 0.01 100 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) 1000 TJ=125°C 100 TJ=100°C 10 TJ=50°C 1.0 TJ=25°C 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)! REV. 2, 18-Aug-2015