ETC2 HM72B-06R68LF High power high performance molded surface mount inductor Datasheet

0
HM72B
Electrical / Environmental
High Power High Performance Molded
Surface Mount Inductors
Operating Temperature Range
Temperature Rise, Maximum
Operating Frequency
•
•
•
-40°C to +130°C
+50°C
Up to 3MHz
Specification @ 25°C
Heating
Current(2)
(Adc)
26.2
23.3
20.3
18.0
16.1
14.4
12.0
10.3
8.4
8.3
6.6
5.4
4.1
3.2
2.2
1.8
Inductance(1)
Part Number
µH±20%
HM72B-06R10LF
HM72B-06R15LF
HM72B-06R22LF
HM72B-06R33LF
HM72B-06R47LF
HM72B-06R68LF
HM72B-06R82LF
HM72B-061R0LF
HM72B-061R5LF
HM72B-062R2LF
HM72B-063R3LF
HM72B-064R7LF
HM72B-066R8LF
HM72B-06100LF
HM72B-06220LF
HM72B-06330LF
0.10
0.15
0.22
0.33
0.47
0.68
0.82
1.00
1.50
2.20
3.30
4.70
6.80
10.0
22.0
33.0
DCR (mΩ)
Isat(3)
(Adc)
Typ.
Max.
60.0
52.0
40.0
30.0
26.0
25.0
24.0
22.0
18.0
14.0
13.5
10.0
8.0
7.0
4.5
3.5
1.5
1.9
2.5
3.2
4.0
5.0
7.2
9.0
13.0
15.0
26.5
35.0
62.0
100.0
219.0
302.0
1.7
2.5
2.8
3.9
4.2
5.5
8.0
10.0
14.0
20.0
28.0
40.0
68.0
105.0
241.0
332.0
Notes:
(1) Inductance is measured at 100 kHz, 0.1Vac without DC current.
(2) The Heating Current is the DC current which causes the component temperature to increase by 50°C.
This current is determined by soldering the component on a typical application PCB, and then applying
the current to the device for 30 minutes.
(3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by
20% typical from its initial (zero DC) value.
Outline Dimensions (mm)
Top View
Side View
Bottom View
Recommended
PCB layout
Last Updated: 10 November 2010
MAGNETIC COMPONENTS
We reserve the right to change specifications without prior notice.
Page 1 OF 2
www.bitechnologies.com
Electrical Characteristic @ 20°C (Cont’d)
Packaging / Ordering Information
One reel (13”)
One shipping carton (6 reels)
HM72B
2000 pcs
12000 pcs
-
06
R33
LF
TR13
13” tape & reel
packing
Model Series
Case Size
Lead Free
Inductance Code:
First 2 digits are significant. Last digit
denotes number of trailing zeros. For values
below 10µH, “R” denotes the decimal point.
MAGNETIC COMPONENTS
We reserve the right to change specifications without prior notice.
Page 2 OF 2
www.bitechnologies.com
Similar pages