ETC2 HM72E-06 High power high performance molded surface mount inductor Datasheet

High Power High Performance
Molded Surface Mount Inductors
MODEL HM72E-06
• Operating & Storage Temperature -40°C to +155°C
• Temperature Rise, Maximum 50°C
• Operating Frequency Up to 3MHz
Specifications @ 25°C
Part Number
Inductance(1)
μH±20%
Heating
Current(2)
(Adc)
Isat(3)
(Adc)
HM72E-06R10LF
HM72E-06R20LF
HM72E-06R33LF
HM72E-06R47LF
HM72E-06R68LF
HM72E-061R0LF
HM72E-061R5LF
HM72E-062R2LF
HM72E-063R3LF
HM72E-064R7LF
HM72E-06330LF
0.10
0.20
0.33
0.47
0.68
1.00
1.50
2.20
3.30
4.70
33.0
26.2
20.3
18.0
16.1
14.4
10.3
8.4
8.3
6.6
5.4
1.8
45.0
34.0
22.0
19.0
16.5
15.0
10.0
8.5
8.0
6.5
2.5
Notes: (1)
(2)
(3)
(4)
DCR (mΩ)
Typ.
1.5
2.5
3.2
4.0
5.0
9.0
13.0
18.0
26.5
39.0
302.0
Max.
1.7
2.8
3.9
4.2
5.5
10.0
14.0
20.0
30.0
42.0
332.0
Inductance is measured at 100 kHz, 0.1Vac without DC current.
The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined
by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes.
The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value.
The part temperature (ambient + temperature rise) should not exceed 130°C.
Electrical Characteristics @ 25°C
Top View
Side View
Bottom View
Recommended
PCB layout
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com
© TT electronics plc
05.13
High Power High Performance Molded
Surface Mount Inductors
MODEL HM72E-06
Electrical Characteristic @ 20°C (Cont’d)
L Vs I
INDUCTANCE (uH)
4.800
4.600
4.400
4.200
4.000
3.800
3.600
3.400
3.200
3.000
2.800
2.600
2.400
2.200
2.000
1.800
1.600
1.400
1.200
1.000
0.800
0.600
0.400
0.200
0.000
06R10
06R20
06R33
06R47
06R68
061R0
061R5
062R2
063R3
064R7
0 2 3 4 5 6 8 9 10 12 14 15 16 18 20 21 22 24 25 26 27 28 30 33 35 36 40 45 50 55 60 65
DC CURRENT (A)
Packing / Ordering Information
One reel (13”)
2000 pcs
One shipping carton (6 reels)
12000 pcs
HM72E - 06 R33 LF TR13
Model Series
Case Size:
13” tape & reel packing
Lead Free
Inductance Code:
First 2 digits are significant. Last digit
denotes number of trailing zeros. For values
below 10μH, “R” denotes the decimal point.
General Note
TT electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT electronics’ own data and is considered accurate at time of going to print.
www.bitechnologies.com
© TT electronics plc
05.13
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
BI Technologies:
HM72E-062R2LFTR13 HM72E-06R10LFTR13 HM72E-06330LFTR13 HM72E-063R3LFTR13 HM72E064R7LFTR13 HM72E-06R47LFTR13 HM72E-06R20LFTR13 HM72E-06R68LFTR13 HM72E-061R5LFTR13
HM72E-061R0LFTR13 HM72E-06R33LFTR13
Similar pages