TI1 ADS7809UBG4 16-bit 10î¼s serial cmos sampling analog-to-digital converter Datasheet

ADS7809
7809
ADS
SBAS017C – NOVEMBER 1996 – REVISED OCTOBER 2006
16-Bit 10µs Serial CMOS Sampling
ANALOG-TO-DIGITAL CONVERTER
FEATURES
DESCRIPTION
● 100kHz SAMPLING RATE
● 86dB SINAD WITH 20kHz INPUT
● ±2LSB INL
● DNL: 16 Bits No Missing Codes
● SIX SPECIFIED INPUT RANGES
● SERIAL OUTPUT
● SINGLE +5V SUPPLY OPERATION
● PIN-COMPATIBLE WITH 12-BIT ADS7808
● USES INTERNAL OR EXTERNAL
REFERENCE
● 100mW MAX POWER DISSIPATION
● 0.3" SO-20
● SIMPLE DSP INTERFACE
The ADS7809 is a complete 16-bit sampling Analog-toDigital (A/D) converter using state-of-the-art CMOS structures. It contains a 16-bit capacitor-based Successive Approximation Register (SAR) A/D converter with sample-andhold, reference, clock, and a serial data interface. Data can
be outputted using the internal clock, or can be synchronized
to an external data clock. The ADS7809 also provides an
output synchronization pulse for ease of use with standard
DSP processors.
The ADS7809 is specified at a 100kHz sampling rate, and
specified over the full temperature range. Laser-trimmed
scaling resistors provide various input ranges including ±10V
and 0V to 5V, while an innovative design operates from a
single +5V supply, with power dissipation under 100mW.
The ADS7809 is available in a 0.3" SO-20, and is fully
specified for operation over the industrial –40°C to +85°C
range.
R/C
CS
Power
Down
Successive Approximation Register and Control Logic
Clock
20kΩ
CDAC
R1IN
10kΩ
BUSY
R2IN
Serial
20kΩ
5kΩ
Data
Comparator
R3IN
CAP
Data Clock
Out
Serial Data
Buffer
Internal
+2.5V Ref
4kΩ
REF
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
Copyright © 1996-2006, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
ELECTROSTATIC
DISCHARGE SENSITIVITY
ABSOLUTE MAXIMUM RATINGS(1)
Analog Inputs: R1IN .......................................................................... ±25V
R2IN .......................................................................... ±25V
R3IN .......................................................................... ±25V
REF ................................. VANA + 0.3V to AGND2 – 0.3V
CAP ....................................... Indefinite Short to AGND2,
......................................................................... Momentary Short to VANA
Ground Voltage Differences: DGND, AGND2 ................................. ±0.3V
VANA ...................................................................................................... 7V
VDIG to VANA ....................................................................................... +0.3
VDIG ....................................................................................................... 7V
Digital Inputs ............................................................ –0.3V to VDIG + 0.3V
Maximum Junction Temperature .................................................. +165°C
Internal Power Dissipation ............................................................ 700mW
Lead Temperature (soldering, 10s) .............................................. +300°C
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTE: (1) Stresses above those listed under Absolute Maximum Ratings may
cause permanent damage to the device. Exposure to absolute maximum
conditions for extended periods may affect device reliability.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
MINIMUM
SIGNAL-TOMAXIMUM
NO MISSING
(NOISE +
LINEARITY
CODE LEVEL DISTORTION)
ERROR (LSB)
(LSB)
RATIO (dB)
PACKAGELEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
ADS7809UB
ADS7809U
ADS7809U/1K
ADS7809UB
Rail, 38
Tape and Reel, 1000
Rail, 38
"
ADS7809UB/1K
Tape and Reel, 1000
ADS7809U
"
ADS7809UB
±3
15
83
SO-20
DW
–40°C to +85°C
ADS7809U
"
"
"
±2
16
86
"
"
"
"
"
"
"
"
"
"
"
"
"
"
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com.
2
ADS7809
www.ti.com
SBAS017C
ELECTRICAL CHARACTERISTICS
At TA = –40°C to +85°C, fS = 100kHz, VDIG = VANA = +5V, using internal reference and fixed resistors (see Figure 4), unless otherwise specified.
ADS7809U
PARAMETER
CONDITIONS
MIN
TYP
RESOLUTION
DC ACCURACY
Integral Linearity Error
Differential Linearity Error
No Missing Codes
Transition Noise(2)
Full-Scale Error(3,4)
Full-Scale Error Drift
Full-Scale Error(3,4)
Full-Scale Error Drift
Bipolar Zero Error(3)
Bipolar Zero Error Drift
Unipolar Zero Error(3)
Unipolar Zero Error(3)
Unipolar Zero Error Drift
Recovery to Rated Accuracy
after Power-Down
Power-Supply Sensitivity
(VDIG = VANA = VD)
AC ACCURACY
Spurious-Free Dynamic Range
Total Harmonic Distortion
Signal-to-(Noise + Distortion)
Signal-to-Noise
Full-Power Bandwidth(6)
SAMPLING DYNAMICS
Aperture Delay
Transient Response
Overvoltage Recovery(7)
REFERENCE
Internal Reference Voltage
Internal Reference Source Current
(Must use external buffer)
External Reference Voltage Range
For Specified Linearity
External Reference Current Drain
DIGITAL INPUTS
Logic Levels
VIL
VIH(8)
IIL
IIH
TYP
MAX
UNITS
✻
Bits
±10, 0V to 5V, etc. (See Table I)
See Table I
35
✻
Acquire and Convert
10
±3
+3, –2
15
±7
±2
±2
±2
1
90
83
83
100
–100
88
30
88
250
±2
±1
LSB(1)
LSB
Bits
LSB
%
ppm/°C
%
ppm/°C
mV
ppm/°C
mV
mV
ppm/°C
ms
✻
✻
±0.5
✻
✻
±10
✻
✻
±5
±3
✻
✻
✻
✻
✻
96
–90
86
86
✻
✻
✻
32
✻
✻
–94
✻
40
FS Step
✻
2
✻
150
No Load
µs
kHz
✻
±0.5
±8
+4.75V < VD < +5.25V
fIN = 20kHz
fIN = 20kHz
fIN = 20kHz
–60dB Input
fIN = 20kHz
✻
16
1.3
Ext. 2.5000V Ref
Ext. 2.5000V Ref
Bipolar Ranges
Bipolar Ranges
0V to 10V Ranges
0V to 4V, 0V to 5V Ranges
Unipolar Ranges
1µF Capacitor to CAP
pF
✻
100
LSB
dB(5)
dB
dB
dB
dB
kHz
ns
µs
ns
2.48
2.5
1
2.52
✻
✻
✻
✻
V
µA
2.3
2.5
2.7
✻
✻
✻
V
✻
µA
✻
✻
✻
✻
V
V
µA
µA
Ext. 2.5000V Ref
100
–0.3
+2.0
VIL = 0V
VIH = 5V
ADS7809
SBAS017C
MIN
16
ANALOG INPUT
Voltage Ranges
Impedance
Capacitance
THROUGHPUT SPEED
Complete Cycle
Throughput Rate
ADS7809UB
MAX
www.ti.com
+0.8
VD + 0.3V
±10
±10
✻
✻
3
ELECTRICAL CHARACTERISTICS (Cont.)
At TA = –40°C to +85°C, fS = 100kHz, VDIG = VANA = +5V, using internal reference and fixed resistors as shown in Figure 4, unless otherwise specified.
ADS7809U
PARAMETER
DIGITAL OUTPUTS
Data Format
Data Co
Pipeline Delay
Data Clock
Internal
(Output Only When
Transmitting Data)
External
(Can Run Continually)
VOL
VOH
Leakage Current
Output Capacitance
POWER SUPPLIES
Specified Performance
VDIG
VANA
IDIG
IANA
Power Dissipation: PWRD LOW
PWRD HIGH
MIN
EXT/INT LOW
Serial 16 bits
Binary Two’s Complement or Straight Binary
Conversion results only available after completed conversion.
Selectable for internal or external data clock
2.3
✻
EXT/INT HIGH
0.1
ISINK = 1.6mA
ISOURCE = 500µA
High-Z State,
VOUT = 0V to VDIG
High-Z State
TYP
ADS7809UB
CONDITIONS
MAX
MIN
10
TYP
✻
+0.4
+4.75
+4.75
+5
+5
0.3
16
VANA = VDIG = 5V, fS = 100kHz
MHz
✻
±5
✻
15
✻
pF
✻
✻
V
V
mA
mA
mW
µW
+5.25
+5.25
✻
✻
✻
✻
✻
✻
✻
100
–40
–55
–65
MHz
V
V
µA
✻
50
TEMPERATURE RANGE
Specified Performance
Derated Performance
Storage
Thermal Resistance (θJA)
SO
UNITS
✻
✻
+4
Must be ≤ VANA
MAX
+85
+125
+150
75
✻
✻
✻
✻
✻
✻
✻
°C
°C
°C
°C/W
✻ Same as specification for ADS7809U.
NOTES: (1) LSB means Least Significant Bit. For the ±10V input range, one LSB is 305µV.
(2) Typical rms noise at worst case transitions and temperatures.
(3) As measured with fixed resistors shown in Figure 4. Adjustable to zero with external potentiometer.
(4) For bipolar input ranges, full-scale error is the worst case of –Full Scale or +Full Scale untrimmed deviation from ideal first and last code transitions,
divided by the transition voltage (not divided by the full-scale range) and includes the effect of offset error. For unipolar input ranges, full-scale error
is the deviation of the last code transition divided by the transition voltage. It also includes the effect of offset error.
(5) All specifications in dB are referred to a full-scale ±10V input.
(6) Full-Power Bandwidth defined as Full-Scale input frequency at which Signal-to-(Noise + Distortion) degrades to 60dB.
(7) Recovers to specified performance after 2 • FS input overvoltage.
(8) The minimum VIH level for the DATACLK signal is 3V.
4
ADS7809
www.ti.com
SBAS017C
PIN ASSIGNMENTS
PIN #
NAME
1
R1IN
DESCRIPTION
2
AGND1
3
R2IN
Analog Input. See Table I and Figure 4 for input range connections.
Analog Ground. Used internally as ground reference point. Minimal current flow.
Analog Input. See Table I and Figure 4 for input range connections.
4
R3IN
Analog Input. See Table I and Figure 4 for input range connections.
5
CAP
Reference Buffer Capacitor. 2.2µF Tantalum to ground.
6
REF
Reference Input/Output. Outputs internal 2.5V reference. Can also be driven by external system reference. In both cases,
bypass to ground with a 2.2µF Tantalum capacitor.
7
AGND2
Analog Ground
8
SB/BTC
Select Straight Binary or Binary Two’s Complement data output format. If HIGH, data will be output in a Straight Binary format. If
LOW, data will be output in a Binary Two’s Complement format.
9
EXT/INT
Select External or Internal Clock for transmitting data. If HIGH, data will be output synchronized to the clock input on DATACLK. If
LOW, a convert command will initiate the transmission of the data from the previous conversion, along with 16 clock pulses output
on DATACLK.
10
DGND
Digital Ground
11
SYNC
Synch Output. If EXT/INT is HIGH, either a rising edge on R/C with CS LOW or a falling edge on CS with R/C HIGH will output a
pulse on SYNC synchronized to the external DATACLK.
12
DATACLK
13
DATA
14
TAG
Tag Input for use in external clock mode. If EXT/INT is HIGH, digital data input on TAG will be output on DATA with a delay of 16
DATACLK pulses as long as CS is LOW and R/C is HIGH. See Figure 3.
15
R/C
Read/Convert Input. With CS LOW, a falling edge on R/C puts the internal sample-and-hold into the hold state and starts a conversion.
When EXT/INT is LOW, this also initiates the transmission of the data results from the previous conversion. If EXT/INT is HIGH, a
rising edge on R/C with CS LOW, or a falling edge on CS with R/C HIGH, transmits a pulse on SYNC and initiates the transmission of
data from the previous conversion.
Either an input or an output depending on the EXT/INT level. Output data will be synchronized to this clock. If EXT/INT is LOW,
DATACLK will transmit 16 pulses after each conversion, and then remain LOW between conversions.
Serial Data Output. Data will be synchronized to DATACLK, with the format determined by the level of SB/BTC. In the external clock
mode, after 16 bits of data, the ADS7809 will output the level input on TAG as long as CS is LOW and R/C is HIGH (see Figure 3). If
EXT/INT is LOW, data will be valid on both the rising and falling edges of DATACLK, and between conversions DATA will stay at the
level of the TAG input when the conversion was started.
16
CS
17
BUSY
Busy Output. Falls when a conversion is started, and remains LOW until the conversion is completed and the data is latched into the
output shift register. CS or R/C must be HIGH when BUSY rises, or another conversion will start without time for signal acquisition.
Chip Select. Internally OR’ed with R/C.
18
PWRD
Power Down Input. If HIGH, conversions are inhibited and power consumption is significantly reduced. Results from the previous
conversion are maintained in the output shift register.
19
VANA
Analog Supply Input. Nominally +5V. Connect directly to pin 20, and decouple to ground with 0.1µF ceramic and 10µF tantalum
capacitors.
20
VDIG
Digital Supply Input. Nominally +5V. Connect directly to pin 19. Must be ≤ VANA.
PIN CONFIGURATION
R1IN
1
20 VDIG
AGND1
2
19 VANA
R2IN
3
18 PWRD
R3IN
4
17 BUSY
CAP
5
REF
6
15 R/C
AGND2
7
14 TAG
SB/BTC
8
13 DATA
EXT/INT
9
DGND 10
ADS7809
ANALOG
INPUT
RANGE
CONNECT R1IN
VIA 200Ω
TO
±10V
±5V
±3.33V
0V to 10V
0V to 5V
0V to 4V
VIN
AGND
VIN
AGND
AGND
VIN
CONNECT R2IN
VIA 100Ω
CONNECT R3IN
TO
TO
AGND
VIN
VIN
VIN
AGND
AGND
IMPEDANCE
CAP
CAP
CAP
AGND
VIN
VIN
22.9kΩ
13.3kΩ
10.7kΩ
13.3kΩ
10.0kΩ
10.7kΩ
TABLE I. Input Range Connections. See Figure 4 for complete
information.
16 CS
t1
CS, R/C
t3
BUSY
t2
12 DATACLK
t4
t5
11 SYNC
MODE Acquire
Convert
Acquire
t6
t7
FIGURE 1. Basic Conversion Timing.
ADS7809
SBAS017C
www.ti.com
5
SYMBOL
DESCRIPTION
MIN
t1
t2
t3
t4
t5
t6
t7
t6 + t7
t8
t9
t10
t11
t12
t13
t14
t15
t16
t17
t18
t19
t20
Convert Pulse Width
BUSY Delay
BUSY LOW
BUSY Delay After End of Conversion
Aperture Delay
Conversion Time
Acquisition Time
Throughput Time
R/C LOW to DATACLK Delay
DATACLK Period
Data Valid to DATACLK HIGH Delay
Data Valid After DATACLK LOW Delay
External DATACLK
External DATACLK HIGH
External DATACLK LOW
DATACLK HIGH Setup Time
R/C to CS Setup Time
SYNC Delay After DATACLK HIGH
Data Valid Delay
CS to Rising Edge Delay
Data Available after CS LOW
40
TYP
220
40
7.6
20
100
100
20
30
20
10
15
25
25
6
MAX
UNITS
6000
65
8
ns
ns
µs
ns
ns
µs
µs
µs
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
µs
8
2
10
9
450
440
75
125
t12 + 5
35
55
TABLE II. Conversion and Data Timing. TA = –40°C to +85°C.
t8
R/C
t9
t1
1
DATACLK
2
3
15
16
Bit 13 Valid
Bit 1 Valid
LSB Valid
t11
t10
SDATA
MSB Valid
Bit 14 Valid
t2
t3
BUSY
FIGURE 2. Serial Data Timing Using Internal Clock. (CS , EXT/INT and TAG Tied LOW.)
6
ADS7809
www.ti.com
SBAS017C
SPECIFIC FUNCTION
CS
R/C
Initiate Conversion and
Output Data Using
Internal Clock
1>0
0
1
0
Output
0
x
0
1>0
1
0
Output
0
x
1>0
0
1>0
0
1>0
1
1
1
1
1
1
1
Input
Input
Input
0
0
x
x
x
x
1>0
1
0
1
Input
0
x
0
0>1
0
1
Input
0
x
Incorrect Conversions
0
0
0>1
x
x
0
x
CS or R/C must be HIGH or a new conversion will
be initiated without time for acquisition.
Power-Down
x
x
x
x
x
x
x
x
x
x
0
1
x
x
Analog circuitry powered. Conversion can proceed.
Analog circuitry disabled. Data from previous
conversion maintained in output registers.
Selecting Output Format
x
x
x
x
x
x
x
x
x
x
x
x
0
1
Serial data is output in Binary Two’s Complement format.
Serial data is output in Straight Binary format.
Initiate Conversion and
Output Data Using External
Clock
BUSY EXT/INT DATACLK PWRD
SB/BTC
OPERATION
Initiates conversion “n”. Data from conversion “n – 1”
clocked out on DATA synchronized to 16 clock
pulses output on DATACLK.
Initiates conversion “n”. Data from conversion “n – 1”
clocked out on DATA synchronized to 16 clock
pulses output on DATACLK.
Initiates conversion “n”.
Initiates conversion “n”.
Outputs a pulse on SYNC followed by data from
conversion “n” clocked out synchronized to external
DATACLK.
Outputs a pulse on SYNC followed by data from
conversion “n – 1” clocked out synchronized to
external DATACLK.(1) Conversion “n” in process.
Outputs a pulse on SYNC followed by data from
conversion “n – 1” clocked out synchronized to
external DATACLK .(1) Conversion “n” in process.
NOTE: (1) See Figure 3b for constraints on previous data valid during conversion.
TABLE III. Control Truth Table.
DIGITAL OUTPUT
BINARY TWO’S COMPLEMENT
(SB/BTC LOW)
ANALOG INPUT
DESCRIPTION
Full-Scale Range
Least Significant Bit (LSB)
+Full Scale (FS – 1LSB)
Midscale
One LSB Below Midscale
–Full Scale
±10
±5
±3.33V
0V to 10V
0V to 5V
0V to 4V
305µV
153µV
102µV
153µV
76µV
61µV
9.999695V 4.999847V 3.333231V 9.999847V 4.999924V 3.999939V
0V
0V
0V
–305µV
–153µV
–102µV
–10V
–5V
–3.333333V
5V
2.5V
2V
4.999847V 2.499924V 1.999939V
0V
0V
0V
STRAIGHT BINARY
(SB/BTC HIGH)
BINARY CODE
HEX
CODE
BINARY CODE
HEX
CODE
0111 1111 1111 1111
7FFF
1111 1111 1111 1111
FFFF
0000 0000 0000 0000
0000
1000 0000 0000 0000
8000
1111 1111 1111 1111
FFFF
0111 1111 1111 1111
7FFF
1000 0000 0000 0000
8000
0000 0000 0000 0000
0000
TABLE IV. Output Codes and Ideal Input Voltages.
ADS7809
SBAS017C
www.ti.com
7
www.ti.com
FIGURE 3a. Conversion and Read Timing with External Clock. (EXT/INT Tied High.) Read After Conversion.
8
t12
t13
t14
1
0
2
3
4
13
14
EXTERNAL
DATACLK
t1
t19
t15
CS
t16
R/C
t2
BUSY
SYNC
t16
t17
t12
t18
DATA
TAG
Tag 0
Bit 15 (MSB)
Bit 14
Bit 1
Bit 0 (LSB)
Tag 0
Tag 1
Tag 1
Tag 2
Tag 15
Tag 16
Tag 17
Tag 18
Tag 19
SBAS017C
ADS7809
Tag 19
Tag 18
Tag 1
Tag 1
t1
t17
t15
Tag 0
t12
t18
t20
Bit 15 (MSB)
Tag 16
Bit 0 (LSB)
Tag 0
Tag 17
t19
t14
t2
t12
TAG
DATA
SYNC
BUSY
R/C
CS
EXTERNAL
DATACLK
t16
t13
FIGURE 3b. Conversion and Read Timing with External Clock. (EXT/INT Tied High.) Read During Conversion (Previous
Conversion Results).
ADS7809
SBAS017C
www.ti.com
9
Input Range
With Trim
(Adjust offset first at 0V, then adjust gain)
Without Trim
200Ω
200Ω
R1IN
R1IN
AGND1
AGND1
100Ω
100Ω
VIN
R2IN
33.2kΩ
R3IN
R2IN
VIN
33.2kΩ
0V-10V
R3IN
+5V
2.2µF
CAP
+
2.2µF
CAP
50kΩ
576kΩ
REF
2.2µF
+
+5V
REF
50kΩ
+
+
2.2µF
AGND2
AGND2
200Ω
200Ω
R1IN
R1IN
AGND1
AGND1
100Ω
100Ω
R2IN
33.2kΩ
R2IN
33.2kΩ
R3IN
VIN
R3IN
VIN
+5V
0V-5V
CAP
CAP
+5V
+
2.2µF
REF
576kΩ
+
50kΩ
2.2µF
REF
50kΩ
+
2.2µF
2.2µF
AGND2
AGND2
200Ω
200Ω
VIN
R1IN
VIN
R1IN
AGND1
AGND1
100Ω
100Ω
R2IN
R2IN
R3IN
R3IN
33.2kΩ
+5V
CAP
+
0V-4V
33.2kΩ
+5V
+
2.2µF
576kΩ
2.2µF
REF
2.2µF
+
+
50kΩ
REF
50kΩ
2.2µF
AGND2
CAP
+
AGND2
FIGURE 4a. Offset/Gain Circuits for Unipolar Input Ranges.
10
ADS7809
www.ti.com
SBAS017C
Input Range
With Trim
(Adjust offset first at 0V, then adjust gain)
Without Trim
200Ω
200Ω
VIN
R1IN
VIN
R1IN
AGND1
AGND1
100Ω
100Ω
R2IN
R2IN
±10V
+5V
R3IN
33.2kΩ
33.2kΩ
R3IN
50kΩ
+5V
CAP
+
REF
2.2µF
CAP
+
2.2µF
576kΩ
2.2µF
REF
50kΩ
+
2.2µF
+
AGND2
AGND2
200Ω
200Ω
R1IN
R1IN
AGND1
AGND1
100Ω
100Ω
R2IN
VIN
33.2kΩ
R2IN
VIN
33.2kΩ
R3IN
2.2µF
+5V
CAP
+
REF
2.2µF
CAP
+5V
50kΩ
2.2µF
R3IN
+
± 5V
576kΩ
REF
50kΩ
+
+
2.2µF
AGND2
AGND2
200Ω
200Ω
VIN
R1IN
100Ω
VIN
AGND1
R1IN
AGND1
100Ω
R2IN
R2IN
R3IN
33.2kΩ
2.2µF
+5V
CAP
±3.3V
R3IN
33.2kΩ
+
CAP
+5V
50kΩ
+
REF
2.2µF
+
576kΩ
REF
50kΩ
+
2.2µF
AGND2
2.2µF
AGND2
FIGURE 4b. Offset/Gain Circuits for Bipolar Input Ranges.
ADS7809
SBAS017C
www.ti.com
11
Revision History
DATE
REVISION
PAGE
SECTION
10/06
C
3
Absolute Maximum Ratings
DESCRIPTION
CAP and REF were switched.
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
12
ADS7809
www.ti.com
SBAS017C
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
ADS7809P
OBSOLETE
PDIP
N
20
TBD
Call TI
Call TI
ADS7809PB
OBSOLETE
PDIP
N
20
TBD
Call TI
Call TI
ADS7809U
NRND
SOIC
DW
20
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
ADS7809U/1K
NRND
SOIC
DW
20
1000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
ADS7809U/1KE4
NRND
SOIC
DW
20
1000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
ADS7809UB
NRND
SOIC
DW
20
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
B
ADS7809UB/1K
NRND
SOIC
DW
20
1000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
B
ADS7809UB/1KE4
NRND
SOIC
DW
20
1000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
B
ADS7809UBE4
NRND
SOIC
DW
20
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
B
ADS7809UBG4
NRND
SOIC
DW
20
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
B
ADS7809UE4
NRND
SOIC
DW
20
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
ADS7809UG4
NRND
SOIC
DW
20
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
-40 to 85
ADS7809U
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
ADS7809U/1K
Package Package Pins
Type Drawing
SOIC
DW
20
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
1000
330.0
24.4
Pack Materials-Page 1
10.8
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
13.3
2.7
12.0
24.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
ADS7809U/1K
SOIC
DW
20
1000
367.0
367.0
45.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages