Surface Mount JSPQW-100+ JSPQW-100 Power Splitter/Combiner 2 Way-90° 50Ω Maximum Ratings Operating Temperature Storage Temperature 40 to 100 MHz Features -55°C to 100°C Power Input (as a splitter) 1W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections SUMPORT 9 PORT 1 (+90°) 2 PORT 2 (0°) • VHF • instrumentation • modulators • image rejection mixers 1,3,4,5,7,8,10,11,12,14 50 OHM TERM EXTERNAL +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications 6 GROUND CASE STYLE: BK276 • low insertion loss, 0.2 dB typ. • good isolation, 24 dB typ. • excellent phase unbalance 1 deg. typ. • good VSWR, 1.20:1 typ. • aqueous washable -40°C to 85°C 13 FREQ. RANGE (MHz) Outline Drawing Electrical Specifications ISOLATION (dB) INSERTION LOSS (dB) Avg. of Coupled Outputs ABOVE 3 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) fL-fU Typ. Min. Typ. Max. Max. Max. 40-100 24 18 0.2 0.6 3 1.2 Typical Performance Data Frequency (MHz) PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) C --- D .100 2.54 H .047 1.19 J .065 1.65 K .065 1.65 L .470 11.94 E .250 6.35 F .102 2.59 G .100 2.54 wt grams 3.0 Demo Board MCL P/N: TB-212 Suggested PCB Layout (PL-098) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-1 S-2 40.00 43.00 46.00 50.50 55.00 3.49 3.34 3.22 3.10 3.02 2.84 2.99 3.11 3.26 3.36 0.65 0.35 0.12 0.16 0.34 24.92 25.05 25.16 25.44 25.72 89.75 89.81 89.84 89.84 90.00 1.09 1.09 1.09 1.09 1.09 1.10 1.10 1.10 1.10 1.10 1.12 1.13 1.13 1.14 1.14 59.50 64.00 68.50 73.00 77.50 2.98 2.97 2.98 3.02 3.08 3.41 3.44 3.42 3.39 3.33 0.43 0.47 0.45 0.37 0.25 26.08 26.47 26.94 27.43 27.88 90.00 90.04 90.17 90.19 90.25 1.09 1.08 1.08 1.07 1.07 1.10 1.10 1.09 1.08 1.08 1.14 1.14 1.14 1.14 1.14 82.00 88.00 94.00 97.00 100.00 3.15 3.29 3.47 3.57 3.69 3.25 3.14 3.01 2.94 2.87 0.10 0.15 0.47 0.64 0.83 28.30 28.51 28.09 27.59 26.95 90.38 90.51 90.84 90.94 91.03 1.07 1.08 1.10 1.12 1.13 1.07 1.07 1.07 1.08 1.09 1.15 1.15 1.16 1.17 1.18 1. Total Loss = Insertion Loss + 3dB splitter loss. JSPQW-100 TOTAL LOSS 4.4 S-1(dB) 4.0 S-2(dB) 3.6 3.2 2.8 2.4 40 50 60 70 80 90 100 FREQUENCY (MHz) PHASE UNBALANCE (Deg.) 31 27 23 19 15 40 50 60 70 80 90 100 FREQUENCY (MHz) electrical schematic JSPQW-100 PHASE UNBALANCE 91.2 JSPQW-100 ISOLATION 35 ISOLATION (dB) B .803 20.40 TOTAL LOSS (dB) A .450 11.43 Total Loss1 (dB) 90.8 90.4 90.0 89.6 40 50 60 70 80 90 100 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M151107 JSPQW-100 LC/TD/CP 150910 Page 1 of 1