Zowie GBPC34 Glass passivated bridge rectifier Datasheet

GBPC25 AND 35 SERIES
GLASS PASSIVATED BRIDGE RECTIFIER
Reverse Voltage - 200 to 1000 Volts
GBPC-W
Wire leads
Forward Current - 25~35 Amperes
GBPC-W
Wire leads
GBPC
Standard
FEATURES
METAL HEAT SINK
METAL HEAT SINK
0.335(8.5)
0.295(7.5)
0.335(8.5)
0.295(7.5)
0.925(23.5)
0.886(22.5)
1.200
(30.5)MIN.
0.94(2.4)
diam
0.042(1.07)
0.038(0.97)
0.035(0.9)
0.028(0.7)
0.254(6.45)
0.242(6.15)
1.133(28.8)
1.114(28.3)
0.661(16.8)
0.646(16.4)
1.134(28.8)
1.114(28.3)
GBPC
Standard
Hole for
No. 8 screw
193(4.9) diam
* Glass passivated chip junctions
* Plastic Material has Underwriters Laboratory Flammability
Classification 94V-0
* Integrally mold heatsink provides very low thermal resistance
formaximum heat dissipation
* High forward surge current capability
* Universal 3-way terminals ; snap-on, wire wrap-around, or P.C.B.
mounting
* Typical IR less than 0.3uA
1.134(28.8)
1.114(28.3)
0.732(18.6)
0.693(17.6)
0.661(16.8)
0.646(16.4)
1.134(28.8)
1.114(28.3)
0.720(18.3)
0.469(11.9) 0.705(17.9)
0.429(10.9)
* High temperature soldering guaranteed :
o
260 C/10 seconds at 5 lbs. (2.3kg) tension
0.571(14.5)
0.555(14.1)
0.732(18.6)
0.693(17.6)
MECHANICAL DATA
Case : Molded Plastic with heatsink integrally mounted in the bridge
encapsulation
Polarity : As marked on Body
*Dimensions in inches and (millimeters)
Mounting Torque : 20 in. -lb. max. Weight : 15 grams (approx)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
GBPC 25 AND 35
Ratings at 25 C ambient temperature
SYMBOLS
unless otherwise specified.
UNITS
02(W)
04(W)
06(W)
08(W)
10(W)
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
140
280
420
560
700
Volts
VDC
200
400
600
800
1000
Volts
Maximum DC blocking voltage
Maximum average forwardrectified current
(SEE FIG.1)
GBPC25
GBPC35
I (AV)
25
35
Amps
Peak forward surge current single half sine-wave GBPC25
GBPC35
superimposed on rated load (JEDEC Method)
IFSM
340
400
Amps
GBPC25
GBPC35
I2t
375
660
A s
GBPC25 IF=12.5A
GBPC35 IF=17.5A
VF
1.1
Volts
IR
10
500
uA
VISO
2500
Volts
CJ
300
Rating (non-repetitive for greater than
1ms and less than 8.3ms) for fusing
Maximum instantaneous
forward voltage drop per leg at
Maximum DC reverse current
at rated DC blocking voltage
o
@TA=25 C
o
@TA=125 C
RMA isolation voltage from case to leads
Typical Junction Capacitance per leg (NOTE 1)
Typical thermal resistance per leg (NOTE 2)
Operating junctionStorage temperature range
GBPC25
GBPC35
R
JC
TJ,TSTG
2
pF
1.9
1.4
o
C/W
o
-55 to +150
C
NOTES : (1) Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from junction to case per leg
(3) Bolt down on heat-sink with sillicone thermal compound between bridge and mounting surface for maximun heat transfer efficiency with #10 screw
REV. 0
Zowie Technology Corporation
RATINGS AND CHARACTERISTIC CURVES GBPC25 AND 35
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
FIG.1 - FORWARD CURRENT DERATING CURVE
35
450
GBPC35
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
SINGLE SINE-WAVE
(JEDEC Method)
O
TJ=150 C
400
30
GBPC25
25
20
15
10
350
GB
PC
300
G
BP
C3
5
25
250
200
150
100
5
50
0
0
25
50
75
100
125
150
175
1
10
o
100
AMBIENT TEMPERATURE, C
NUMBER OF CYCLES AT 60Hz
FIG.5 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
100
INSTANTANEOUS REVERSE LEAKAGE
CURRENT, MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
O
TJ=125 C
100
10
1.0
0.1
10
1.0
O
TJ=25 C
0.1
0.01
0.01
0.4
0.6
0.8
1.0
1.2
1.4
0
1.6
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
60
80
100
120
140
FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
FIG.5 - TYPICAL JUNCTION CAPACITANCE
100
o
TRANSIENT THERMAL IMPEDANCE( C/W)
JUNCTION CAPACITANCE, pF
40
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
600
O
TJ=25 C
100
10
1
0.1
50
1.0
10
REVERSE VOLTAGE, VOLTS
REV. 0
20
100
0.01
0.10
1.0
10
100
t , HEATING TIME, sec.
Zowie Technology Corporation
Similar pages