CREE LMH060-2900-30F9-20300TW Led module with cree truewhite technology Datasheet

Cree® LED Module LMH6
with Cree TrueWhite® Technology
Data Sheet
Cree LED Modules provide a simple solution for lighting designers and manufacturers to adopt best-in-class LED
lighting from Cree. The LMH series continues Cree’s history of innovation in LEDs for lighting applications and
provides a comprehensive solution including patented Cree TrueWhite® Technology to achieve an industry-leading
combination of light quality and efficacy. This versatile LED lighting module allows design flexibility with the
beautiful color and efficacy of Cree TrueWhite Technology.
A comprehensive design guide and solid-model STEP files are available through the Cree Module sales team.
This data sheet is intended to introduce you to the features and benefits of the LMH6 module. The design guide
and solid model must be referenced for the thermal, mechanical and optical requirements of a successful LMH6
product design.
CLM-DS04-LM
Data Sheet:
H6 Rev 0C
FEATURES
•
Cree TrueWhite Technology
•
2000 & 2900 lm @ 3000-K & 4000-K CCT
•
DALI or 1–10-V dimming to 5% of rated light output
•
Comprehensive solution with driver electronics, optics and thermals
•
Snap-lock tabs for easy trim mounting
•
Designed to last at least 50,000 hours at L70
•
Cree IES LM-80 data in support of U.S. DOE ENERGY STAR® qualification
•
The LMH6 (230-V) complies with multiple international standards
•
Integral splice compartment
•
Both Asian and European Union wire access plates supplied
The Cree LED Module LMH6 with Cree TrueWhite Technology is the ideal choice for commercial lighting applications
where high CRI, luminous flux and efficacy are required, such as restaurants, retail and hospitality lighting.
Cree TrueWhite technology:
•
•
•
•
A better way to generate white light that utilizes a patented mixture of unsaturated yellow and saturated red
LEDs.
Proprietary optical system utilizes a unique combination of reflective and refractive optical components to
achieve a uniform, comfortable appearance. Pixelation and direct view of LEDs is eliminated.
Technology benefit – high CRI and efficacy allows customers to avoid making tradeoffs between energy
efficiency and light quality as compared to other lighting alternatives.
Marketing benefit – Cree logo on lens enables brand marketing value on final design.
DALI Features
•
•
•
DALI (Digital Addressable Lighting Interface) dimming
DALI device type 1 (IEC 62386 Part 102) for the AC/DC power supply (DALI version 2006)
Onboard thermal management
Subject to change without notice.
www.cree.com/modules
1
Characteristics
The following table provides several base order codes for the Cree LED Module LMH6, as well as a description of the
order-code nomenclature.
CCT
(K)*
Nominal
Luminous
Flux (lm)
CRI
Input
Power
(W)
Input Voltage
(V)/Freq (Hz)**
Power
Factor
Dimming
Order Code
4000
2000
>90
27
230/50
>.90
DALI
LMH060-2000-40F9-20200TW
4000
2900
>90
37
230/50
>.90
DALI
LMH060-2900-40F9-20200TW
3000
2000
>90
27
230/50
>.90
DALI
LMH060-2000-30F9-20200TW
3000
2900
>90
37
230/50
>.90
DALI
LMH060-2900-30F9-20200TW
4000
2000
>90
27
230/50
>.90
1–10 V
LMH060-2000-40F9-20300TW
4000
2900
>90
37
230/50
>.90
1–10 V
LMH060-2900-40F9-20300TW
3000
2000
>90
27
230/50
>.90
1–10 V
LMH060-2000-30F9-20300TW
3000
2900
>90
37
230/50
>.90
1–10 V
LMH060-2900-30F9-20300TW
* Refer to section below on chromaticity for more details
** Input range is 220–240 V / 50–60 Hz
Note: Cree maintains a tolerance of +/- 7% on flux and power measurements
Form Factor - Light Engine
units = mm
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR®
is a registered trademark of the U.S. Environmental Protection Agency.
2
CLM-DS04-LMH6 Rev 0C
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
Form Factor - Power Supply
units = mm
Thermal Management Guidelines
Acceptable ambient starting and operating temperatures of the
Cree LED Module LMH6 are between 0°C and 40°C. (The lifetime
and performance estimates described in this document require
that the Tc limit stated in this Thermal Management Guidelines
section is adhered to and only the modifications described in this
document are implemented.)
Tc LOCATION
The Cree LED Module LMH6 is designed to perform in a variety of
non-IC environments; however, the LED module lifetime is highly
dependent upon the Tc (case temperature). To achieve lifetime
and performance estimates and to maintain the warranty, the final
design cannot exceed 70°C at thermal equilibrium, based on the
Tc point (shown in the figure on the right) where the thermocouple
is placed and tested in situ.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR®
is a registered trademark of the U.S. Environmental Protection Agency.
3
CLM-DS04-LMH6 Rev 0C
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
Photometry
The following photometry results are design values. Absolute photometric testing at independent testing labs can be
expected to vary by ± 7%.
Candela Table
Angle
LMH060-2900
LMH060-2000
0
1266
987
5
1261
979
15
1220
933
25
1119
847
35
950
704
45
783
520
55
488
333
65
242
127
75
74
55
85
7
3
90
1
1
Zonal Lumens Summary
LMH060-2900
Zone
Lumens
% Lamp
% Fixt
0-30
979
-
34
0-40
1572
-
54
0-60
2574
-
88
0-90
2916
-
100
0-180
2916
-
100
Zonal Lumens Summary
LMH060-2000
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR®
is a registered trademark of the U.S. Environmental Protection Agency.
4
CLM-DS04-LMH6 Rev 0C
Zone
Lumens
% Lamp
% Fixt
0-30
745
-
35
0-40
1184
-
57
0-60
1885
-
90
0-90
2074
-
100
0-180
2074
-
100
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
Chromaticity
Secondary optics added to the module will reduce the light output and could also alter the color characteristics of
the final luminaire design. The Cree LED Module LMH6 provides high color consistency around the specified color
temperature. Individual LEDs are tested and matched in order to meet the designed chromaticity specification, which
is defined by the following bounding coordinates.
Color Temp
Code
40F
35F
30F
27F
CCT
(K)
4000
3500
3000
2700
Ccx
Ccy
0.3722
0.3739
0.3822
0.3706
0.3915
0.3857
0.3813
0.3892
0.3974
0.3858
0.4074
0.3823
0.4174
0.3979
0.4073
0.4016
0.4236
0.3969
0.4334
0.3932
0.4442
0.4093
0.4342
0.4131
0.4473
0.4037
0.4569
0.4000
0.4684
0.4164
0.4586
0.4203
Order Codes
Series
LMH = LED Module Type
Luminous flux
2000 = 2000 lumens nominal
CRI
9 = 90+ CRI
Internal code
TW = TrueWhite
SSSSSS-LLLL-CCCC-NNNNNNN
Power supply
2 = 230-V
Color temp
30F = 3000-K CCT
Form factor
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document
is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR®
is a registered trademark of the U.S. Environmental Protection Agency.
5
CLM-DS04-LMH6 Rev 0C
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/modules
Similar pages