UTC ER1004CG-TA3-T Superfast recovery rectifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
ER1004C
Preliminary
FAST RECOVERY EPITAXIAL DIODE
SUPERFAST RECOVERY
RECTIFIER

DESCRIPTION
The UTC ER1004C is a superfast recovery rectifier, it uses
UTC’s advanced technology to provide customers with low forward
voltage drop, high current capability and high efficiency, etc.

FEATURES
* Low forward voltage drop
* High current capability
* High surge capacity
* Low power loss
* High efficiency
* Super fast recovery times, high voltage

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
ER1004CL-TA3-T
ER1004CG-TA3-T
ER1004CL-TF3-T
ER1004CG-TF3-T
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
TO-220F
Pin Assignment
1
2
3
A
K
A
A
K
A
Packing
Tube
Tube
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R201-093.b
ER1004C

Preliminary
FAST RECOVERY EPITAXIAL DIODE
ABSOLUTE MAXIMUM RATINGS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or
inductive load. For capacitance load, derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VR
400
V
RMS Voltage
VRMS
280
V
Recurrent Peak Reverse Voltage
VRRM
400
V
Average Average Forward Current at TC=100°C
IF(AV)
10
A
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
IFSM
150
A
Superimposed on Rated Load (JEDEC Method)
Operating Junction Temperature
TJ
-55~+150
°C
Storage Temperature
TSTG
-55~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS (PER LEG)
PARAMETER
SYMBOL
θJA
Junction to Ambient
Junction to Case

TO-220
TO-220F
θJC
RATINGS
62.5
3
5
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,
inductive load. For capacitance load, derate current by 20%
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP
Forward Voltage Drop
VF
IF=5A
DC Reverse Current at Rated DC Blocking
TJ=25°C
IR
Voltage
TJ=100°C
Reverse Recovery Time (Note 2)
trr
Junction Capacitance (Note 1)
CJ
62
Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
resistive or
MAX UNIT
1.3
V
1
μA
500 μA
50
ns
pF
2 of 3
QW-R201-093.b
ER1004C
Preliminary
FAST RECOVERY EPITAXIAL DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R201-093.b
Similar pages