Red Lion LDPLUG00 Large display for strain gage input Datasheet

Large Display Strain Gage
Red Lion Automation Series
Large Display for Strain Gage Inputs
Red Lion’s Large Display Strain Gage (LDSG) is
the latest addition to our Large Display portfolio
for advanced control and communication of
weight measurement.
Available in both large 2-¼ and 4-inch display sizes, the LDSG accepts most
load cell and strain gage inputs and communicates real-time weight information
to a database or management system for accurate monitoring, storage and
reporting. By using alarming setpoints and a display that is readable from
distances up to 180 feet away, operators are automatically alerted and can
easily see when weight limits are being approached or exceeded.
With easy, push-button setup and NEMA4X/IP64 sealed enclosure design,
LDSG implementation is simple. Once installed, weight values can be collected
in real time and used later via its RS232/RS485 serial communication ports.
The end result provides the reliability and ease of use required to improve
efficiency and reduce costs by increasing weight measurement accuracy.
APPLICATIONS
PRODUCT HIGHLIGHTS
>> Food & Beverage
>> 2-1/4 and 4-inch red LED display options
>> Truck & Crane Scales
>> Accepts strain gage, load cells and pressure inputs
>> Cement Mixing & Transport
>> Dual setpoint control
>> Force & Concrete Testing
>> Rugged, aluminum NEMA 4X case construction
>> Construction
>> RS232/RS485 communication
FEATURES & BENEFITS
>> 2-1/4 and 4-inch red LED display options
• Readable from up to 180 feet
>> Accepts a variety of inputs
• Strain gage
• Load cells
• Pressure
>> NEMA 4X sealed enclosure
• Water tight wiring connectors
• Pressure vent for rapid temperature swings
• Aluminum constructed case
>> Reliable communication
• RS232/RS485 serial ports
• Crimson® 2.0 programmable
 PROGRAMMABLE USER INPUT
 DUAL 5 AMP FORM C RELAY
Large Display Strain Gage Specifications
 ALUMINUM TYPE 4X/IP65 CASE CONSTRUCTION
 RS232/RS485 SERIAL COMMUNICATIONS
 CRIMSON® PROGRAMMING SOFTWARE
 UNIVERSALLY
POWERED
CERTIFICATIONS
& COMPLIANCES
CE Approved:
EN 61326-1 Immunity to Industrial Locations
Emission
CISPR 11 Class A
SAFETY
SUMMARY
Safety
requirements
electrical
equipment that
for measurement
All safety
regulations,
localforcodes
and instructions
appear in this control,
and
andliterature,
laboratory
corresponding
or use:
on equipment, must be observed to ensure personal
ENto61010-1:
General
Requirements
safety and
prevent damage
to either
the instrument or equipment connected to
EN 61010-2-030:
for the
Testing
and
it. If equipment
is used in Particular
a manner Requirements
not specified by
manufacturer,
the
Measuring
protection provided
by Circuits
the equipment may be impaired.
Type 4X Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
SPECIFICATIONS
Refer 5todigit,
EMC2.25"
Installation
section
of the
bulletinRed
for LED
1. DISPLAY:
(57 mm)Guidelines
or 4" (101 mm)
intensity
adjustable
additional
(-99999 to
99999) information.
DISPLAY PROPERTIES
5 digit, 2.25” (57 mm) or 4” (101 mm) intensity adjustable
Red LED (-99999 to 99999)
GENERAL
DESCRIPTION
POWER CONNECTION
The Large
Display40
is atoversatile
display
available
AC Power:
250 VAC
50/60
Hz, 27 as
VAa strain gage meter with
scaling, serial
communications
andVDC,
dual relay
DC Power:
21.6 to 250
12 Woutputs. The 5 digit displays are
availableIsolation:
in either 2300
2.25" Vrms
or 4"for
high
red LED
digits
adjustable
display
1 min.;
Power
IN towith
all inputs
and outputs
intensities. The 2.25" high models are readable up to 130 feet. The 4" high
modelsINPUT
are readable
up to 180 feet. Both versions are constructed of a Type 4X/
RANGES
IP65 enclosure
in light weight aluminum.
±24 mVDC
All models
come with dual Form C relay outputs and RS232 / RS485
±240also
mVDC
serial communications.
TheCONNECTION
Crimson softwareTYPE
is a Windows based program that allows configuration
4-wire
bridge
of the LD
meter
from(differential)
a PC. Crimson offers standard drop-down menu
2-wire
commands,
that (single-ended)
make it easy to program the meter. The meter’s program can
then be
saved in EXCITATION
a PC file for future use. Crimson software can be downloaded
BRIDGE
at www.redlion.net.
Jumper Selectable: 5 VDC @ 65 mA max., ±2%
2. POWER
REQUIREMENTS:
ENVIRONMENTAL
AC POWER:
40 temperature:
to 250 VAC 50/60
Operating
0 to Hz,
65° 27
C VA
DC POWER:
to 250 VDC,
Storage21.6
temperature:
-4012toW70° C
Isolation:
2300 Vrms
for 1 min.;
Power IN
to 85%
all inputs
Operating
and storage
humidity:
0 to
max.and
RHoutputs
(non-condensing)
3. INPUT
RANGES:
Vibration
to IEC 68-2-6: Operational 5-150 Hz, 2 g (1g relay)
MAX
ShockACCURACY*
to IEC 68-2-27:
Operational 30 g (10 g relay)
INPUT
ACCURACY*
IMPEDANCE CONTINUOUS RESOLUTION
Altitude:
meters
RANGE
(18 Up
to 28to
°C)2,000 (0
to 65 °C)
OVERLOAD
10 VDC @ 125 mA max., ±2%
COMMUNICATIONS
Type: RS485 or RS232
Isolation To Sensor & User Input Commons: 500 Vrms for 1 min.
Working Voltage: 50 V. Not Isolated from all other commons.
CAUTION:
Risk 7/8
of Danger.
CAUTION:
CAUTION:
Data:
bits
Read complete
Risk of electric shock.
Parity:instructions
no, odd or even Hot Surface
prior to installation and
Baud
Rate:
operation
of the
unit. 300 to 38.4 K
Bus Address: Selectable 0 to 99, Max. 32 meters per line (RS485)
The protective conductor terminal is bonded to conductive
OUTPUT parts of the equipment for safety purposes and must be
Type: Dual
FORM-C
relay
connected
to an
external protective earthing system.
Isolation To Sensor & User Input Commons: 1400 Vrms for 1 min.
Working Voltage: 150 Vrms
Contact Rating:
5 amps @ 120/240 VAC or 28 VDC (resistive load),
ORDERING
INFORMATION
1/8 H.P. @ 120 VAC (inductive load)
MODEL
DESCRIPTION
PART NUMBER
Life
Expectancy: 100,000 minimum operations
NO.
Response Time:
LD
2 Preset Strain Gage Input; 2.25" High 5 Digit Red LED LD2SG5P0
Turn
On Time: 4 msec maximum
LD Turn
2 Preset
Strain 4Gage
Input;
4" High 5 Digit Red LED
LD4SG5P0
Off Time:
msec
maximum
LD Plug Panel Meter Plug for LD models
0.02% of
0.07% of
MECHANICAL
±24 mVDC
100 Mohm
30 V
1 µV
reading +3 µV reading +4 µV
Construction:
Aluminum enclosure, and steel side panels with textured
0.02% of
0.07% of
and corrosion
±240 mVDCblack polyurethane paint for scratch
100 Mohm
30 V resistance
10 µV
reading +30 µV reading +40 µV
protection. Meets Type 4X/IP65 specifications. Installation Category II,
* After 20 minute
warm-up.
is specified in two ways: Accuracy over
Pollution
DegreeAccuracy
2.
an 18 Weight:
to 28 °CLD2
and 10
to 75%
RH environment;
and accuracy over a 0 to 65
- 4.5
lbs (2.04
kg)
°C and 0LD4
to 85%
RHlbs
(non-condensing
environment). Accuracy over the 0 to
- 10.5
(4.76 kg)
65 °C range includes the temperature coefficient effect of the meter.
ORDERING TYPE:
INFORMATION
4. CONNECTION
4-wire bridge (differential)
2-wire (single-ended)
PART NUMBER
MODEL
DESCRIPTION
5. COMMON MODE RANGE (w.r.t. input common): 0 to +5 VDC
LD2SG5P0
2 Preset Strain Gage Input; 2.25” High 5 Digit Red LED
Rejection:
80 dB (DC toLD
120 Hz)
6. BRIDGE
EXCITATION
LD4SG5P0
LD :
2 Preset Strain Gage Input; 4” High 5 Digit Red LED
Jumper Selectable: 5 VDC @ 65 mA max., ±2%
LDPLUG00 10LD
Plug
Panel
Plug
for LD
models
VDC @ 125
mA
max.,
±2%
Temperature coefficient (ratio metric): 20 ppm/°C max.
7. A/D CONVERTER: 16 bit resolution
8. UPDATE RATES:
A/D conversion rate: 20 readings/sec.
Step response: 200 msec. max. to within 99% of final readout value
(digital filter and internal zero correction disabled)
700 msec. max. (digital filter disabled, internal zero correction enabled)
Display update rate: 1 to 20 updates/sec.
Setpoint output on/off delay time: 0 to 3275 sec.
LDPLUG00
DIMENSIONS In inches (mm)
DIMENSIONS In inches (mm)
X
Z
DSP
MIN
PAR
F1
RST
Y
MAX
F1
1
2
TOT
PART
NUMBER
X (Length)
LD2
16 (406.4)
4 (101.6)
LD4
26 (660.4)
7.875 (200) 22 (558.8)
Y (Height)
Z (Center)
12 (304.3)
2.25
(57.15)
AIR PRESSURE STABILIZATION VENT
1
Americas
[email protected]
w w w. re d l i o n . n e t
Europe
Middle East
Africa
[email protected]
As the global experts in communication, monitoring and control
for industrial automation and networking, Red Lion has been
delivering innovative solutions for over forty years. Our awardwinning technology enables companies worldwide to gain real-time
data visibility that drives productivity. Product brands include Red
Lion, N-Tron and Sixnet. With headquarters in York, Pennsylvania,
the company has offices across the Americas, Asia-Pacific and
Europe. For more information, please visit www.redlion.net. Red
Lion is a Spectris company.
Connect. Monitor. Control.
+1 (717) 767-6511
ADLD0378 111813 © 2013 Red Lion Controls
Asia-Pacific
[email protected]
Similar pages