L3U1 thru L3U3 Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 50~200V Forward Current 3A Features • • • • • • • Glass passivated Superfast Recovery rectifiers Ideal for automated placement L Low fforward d voltage lt d drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified Low profile， typical thickness 1.0mm eSGB (SMAF) Typical Applications For use of fast switch rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol L3U1 L3U2 L3U3 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 V V V Maximum average forward rectified current IF(AV) 3.0 A Peak forward surge current 8.3 8 3 ms single half sine-wave superimposed on rated load IFSM 75 A TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range Electrical Characteristics Parameter Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction i Typical thermal resistance (TA = 25 °C unless otherwise noted) Test Conditions Symbol 3A VF TA=25℃ L3U1 L3U2 L3U3 Unit 1.0 Volts 50 µA 10 mA 35 nS 69 pF 20 ℃/W IR TA=125℃ TA 125℃ IF=0.5A,IR=1.0A, Irr=0.25A 4.0 V, 1 MHz juntion to lead trr CJ RθJL 1) Note1:Thermal resistance from junction to lead,mounted on PCB with 8.0×8.0mm copper pads www.goodark.com 1/4 2014.09-Rev.A L3U1 thru L3U3 Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 50~200V Forward Current 3A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2014.09-Rev.A L3U1 thru L3U3 Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 50~200V Forward Current 3A Package Outline Dimensions DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint Packing Information Packing quantities: Reel size 7" 13" Quantity/reel 3K 10K Quantity/inner Box 21K 20K Quantity/Carton 84K 180K Tape & Reel Specification www.goodark.com 3/4 2014.09-Rev.A L3U1 thru L3U3 Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 50~200V Forward Current 3A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou GoodGood Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou GoodArk Electronics Co., Ltd. for the latest product information before purchasing a product listed herein The information described here may herein. ma contain technical inaccuracies inacc racies or typographical t pographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior Th i written itt approvall off Suzhou S h Good-Ark G d A k Electronics El t i Co., C Ltd. Ltd is i necessary to t reprint i t or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.09-Rev.A