KOA MOX3CL52R473J Metal oxide power type leaded resistor Datasheet

1733 Reader's Spreads pg1-203:document
1/27/09
4:10 PM
Page 121
PMS 300 neg.
Black neg.
metal oxide power type leaded resistor
EU
features
•
•
•
•
•
Flameproof silicone coating equivalent to (UL94V0)
Suitable for automatic machine insertion
High reliability for performance
Marking: Blue-gray body color with color-coded bands
Products with lead-free terminations meet EU RoHS
and China RoHS requirements
dimensions and construction
L
Ceramic Body
D
l
d
Marking
End
Cap
Lead
Wire
Flame Retardant Coating
C
Dimensions inches (mm)
C (max.)
D
d (nom.)
Type
L
MO1/2
MOX1/2
.354±.039
(9.0±1.0)
.437
(11.1)
.126±.02
(3.2±0.5)
MO1
MOX1
.472±.039
(12.0±1.0)
.59
(15.0)
.157±.02
(4.0±0.5)
MO2
MOX2
.610±.039
(15.5±1.0)
.709
(18.0)
.236±.039
(6.0±1.0)
MO3
MOX3
.965±.039
(24.5±1.0)
1.10
(28.0)
.354±.039
(9.0±1.0)
.028
(0.7)
.031
(0.8)
l
.945 Min.
(24.0 Min.)
1.18±.118
(30.0±3.0)
1.50±.118
(38.0±3.0)
ordering information
New Part #
MO
Type
MO
MOX
1
C
Power
Rating
1/2: 0.5W
1: 1W
2: 2W
3: 3W
Termination
Material
C: SnCu
T52
A
Taping and Forming
Packaging
Axial: T52, T521, T631
Stand-off Axial: L52, L521,
L631, L, U, M Forming
(MO3/MOX3 bulk
packaging only)
A: Ammo
R: Reel
473
J
Nominal
Resistance
2 significant
figures + 1
multiplier
“R” indicates
decimal on
value <10Ω
Tolerance
G: ±2%
J: ±5%
For further information
on packaging, please
refer to Appendix C.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
1/09/09
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
123
resistors
MO
1733 Reader's Spreads pg1-203:document
1/27/09
4:10 PM
Page 122
MO
resistors
metal oxide power type leaded resistor
applications and ratings
Power
Rating
@ 70°C
Minimum
Dielectric
Withstanding
Voltage
MO1/2
0.5W
400V
MO1
1.0W
MO2
2.0W
MO3
3.0W
MOX1/2
0.5W
MOX1
1.0W
MOX2
2.0W
MOX3
3.0W
Part
Designation
T.C.R.
(ppm/°C)
Max.
500V
Resistance
Range
E-24
(G±2%)
Resistance
Range
E-24
(J±5%)
10Ω - 47kΩ
10Ω - 47kΩ
10Ω - 100kΩ
±200
400V
5.1Ω - 9.1Ω
500V
Absolute
Maximum
Working
Voltage
Absolute
Maximum
Overload
Voltage
250V
400V
350V
600V
10Ω - 150kΩ
500V
800V
0.2Ω - 9.1Ω
E = √P x R
E x 2.5
10Ω - 120kΩ
Operating
Temperature
Range
-55°C
to
+200°C
environmental applications
Surface Temperature Rise
100
Temperature Rise (°C)
150
% Rated Power
80
60
40
20
0
-60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 220 240
235
-55
70
Ambient Temperature
(°C)
Load Life @ 70°C, 1000 Hr
+4
MOX1
MO1
125
+2
100
MO3, MO3X
MO2, MOX2
75
MO1, MOX1
50
MO1/2, MOX1/2
∆ R/R (%)
Derating Curve
0
-2
25
0
-4
0
25
50
75
100
0.2
1
% Rated Power
10
100
1k
10k 47k
Resistance
(Ω)
Performance Characteristics
Parameter
Resistance
T.C.R.
Overload (Short time)
Resistance to Solder Heat
Requirement ∆ R ±(% + 0.05Ω)
Limit
Typical
Within specified
—
tolerance
Within specified
—
T.C.R.
±1%
±0.5%
±1%
±0.5%
Test Method
Measuring points are at 10mm ±1mm from the end cap.
Room temperature +100°C
Rated voltage x 2.5 or max. overload voltage for 5 seconds, whichever is lower
260°C ±5°C, 10 seconds ± 1 second
No lead-coming off
and loose terminals
—
Rapid Change of Temperature
Moisture Resistance
±1%
±(5%+0.1Ω)
±0.5%
±2%
Endurance at 70°C
High Temperature Exposure
±(5%+0.1Ω)
±(2% +0.1Ω)
±2%
±1%
No abnormality in
appearance. Marking
shall be easily legible
—
Ultrasonic washing with isopropyl alcohol for 2 minutes.
Power: 0.3W/cm3, f: 28kHz, Temp: 35°C ±5°C
—
Flame test: the test flame shall be applied and removed for each 15 seconds respectively
to repeat the cycle 5 times. Overload flame retardant: power (AC) corresponding to 2, 4,
8, 16 and 32 times the power rating shall be applied for each 1 minute until disconnection
occurs. However the applied voltage shall not exceed the value of 4 times of the
maximum operating voltage
Terminal Strength
Resistance to Solvent
Flame Retardant
No evidence of
flaming or
self-flaming
Twist 360°C, 5 times
-55°C (30 minutes), +125°C (30 minutes), 5 cycles
40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
-125°C, 100 hours
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
124
12/29/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
Similar pages