Hamamatsu L10881 Red led for optical link Datasheet

Red LED for optical link
L10881
RC-LED for 156 Mbps POF communications
The L10881 is designed for high-speed POF (plastic optical fiber) communications. The device is molded into miniature plastic
package with lens, allowing easy and efficient coupling to a POF.
Features
Applications
Red RC-LED for POF data link
Plastic optical fiber communications (FA, office machine,
home automation, LAN)
Data transmission in locations subject to high
electromagnetic noise
Peak emission wavelength: 650 nm
(suitable for POF communications)
High-speed response: fc=70 MHz Typ.
High output power: Po=-2 dBm (IF=20 mA, φ1 mm, POF)
Designed to be used with the S7727
Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Value
Forward current
IF
50 *1
Power dissipation
Pmax
130 *2
Operating temperature
Topr
0 to 60
Storage temperature
Tstg
-40 to +85
Soldering
230 °C, 5 s, at least 1.5 mm away from package surface
*1: Decreases at a rate of 0.57 mA/°C
*2: Power dissipation decreases at a rate of 1.7 mW/°C above Ta=25 °C
Unit
mA
mW
°C
°C
-
Forward current vs. ambient temperature
60
Forward current (mA)
50
40
30
20
10
0
-10
0
10
20
30
40
50
60
70
Ambient temperature (°C)
KLEDB0340EA
www.hamamatsu.com
1
L10881
Red LED for optical link
Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Forward voltage
VF
IF=20 mA
Peak emission wavelength
IF=20 mA
λp
Spectral half width (FWHM)
IF=20 mA
Δλ
*3
Fiber coupled optical power
Po
*3
Pulse distortion
ΔT
Cut-off frequency
fc
IF=20 mA ±1 mAp-p
*3: Measured with the recommended driver circuit shown below.
Min.
640
-4.5
-2.5
60
Typ.
1.9
650
-2
70
Max.
2.4
665
25
+0.5
2.5
-
Unit
V
nm
nm
dBm
ns
MHz
Recommended driver circuit
Vcc
Icc
0.1 µF
0.1 mF
1 14 74ACT08
3
2
SIGNAL INPUT
R2
R1
1
2
3
4
7
C1
L10881(X)
KLEDC0047EA
Input is a pseudo-random bi-phase signal at 156 Mbps (NZR signal conversion).
Average value (duty ratio 50 %) measured by using a plastic fiber of φ1 mm. SI-POF and NA=0.5 (GH4001 made by Mitsubishi Rayon).
Vcc=5.0 V, R1=100 Ω, R2=300 kΩ, C1=20 pF
Note:
· A bypass capacitor (0.1 μF) and another capacitor (4.7 μF) are connected between Vcc and GND at a position within 3 mm from the lead.
· The center of the optical fiber is aligned with the center of the lens on the package. The distance between the fiber end and the lens is 0.1 mm.
· When using optical fibers with small core diameter, the fiber-coupled optical output power may vary.
Emission spectrum
(Typ. Ta=25 °C, IF=20 mA)
120
100
40
80
60
40
30
20
10
20
0
600
(Typ. Ta=25 °C, IF=20 mA)
50
Forward current (mA)
Relative Fiber-coupled optical output power (%)
Forward current vs. forward voltage
0
620
640
660
680
700
0
0.5
1.0
1.5
2.0
2.5
3.0
Forward voltage (V)
Wavelength (nm)
KLEDB0321EA
KLEDB0322EA
2
Red LED for optical link
L10881
Fiber-coupled optical output power vs.
ambient temperature
(ŎŦŢŴŶųŦťġŸŪŵũġŵũŦġųŦŤŰŮŮŦůťŦťġťųŪŷŦųġŤŪųŤŶŪŵ)
140
Relative Fiber-coupled optical output power (%)
Output waveform example
120
100
80
60
40
20
0
-40
-20
0
20
40
60
Vertical axis: 30 mV/div., Horizontal axis: 5 ns/div.
(Ta=25 °C, Vcc=5.00 V, R1=100 Ω, R2=300 Ω, CL=20 pF)
80
Ambient temperature (°C)
KLEDB0323EA
Dimensional outline (unit: mm)
1.77
5.2 ± 0.3
(Including burr)
0.97
5.0
0.4
10°
10°
4.3
1.8
(0.9)
4.5 ± 0.3
(Including burr)
6.6 ± 0.4
0.5
1.4
(1.5) (2.15)
4.3
0.69
0.25
1.27 1.27 1.27
(Specified at the lead root)
(0.9)
(0.9)
10°
10°
5.0
Cathode
Cathode
Anode
Cathode
Tolerance unless otherwise
noted: ±0.1, ±2°
Shaded area indicates burr.
Values in parentheses indicate
reference value.
Lead surface finish: Silver plating
Packaging: tray (100 pcs/tray)
(Please consult us for large volume orders.)
KLEDA0088EA
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein.
Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)”
which means developmental specifications. ©2010 Hamamatsu Photonics K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KLED1053E02 Nov. 2010 DN
3
Similar pages