Coilcraft NA5880-AE Coupled inductor Datasheet

Document 1259
Coupled Inductor – NA5880-AE
• Developed for use with Fairchild Semiconductor FAN8831
Sinusoidal Piezoelectric Actuator Driver
• 1 : 4 turns ratio; Output voltages up to 300 V
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over silver-palladiumplatinum-glass frit.
Weight 64 mg
Ambient temperature –40°C to +85°C
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Winding to winding isolation (Hipot) 300 V
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR max
(Ohms)
Part
Inductance2 Turns
number1
±20% (µH)
ratio
L1 L2
NA5880-AE_
3.3
1:4
0.306
2.30
SRF
typ3 Isat4
(MHz)
(A)
12
Dot indicates pin 1
1
4
1.3
1. When ordering, please specify packaging code:
NA5880-AEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3500 parts per
full reel).
2. Inductance is for the primary (L1), measured at 100 kHz, 0.1 Vrms,
0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
3. SRF measured using an Agilent/HP 4191A or equivalent.
4. DC current applied to L1, at which the inductance drops 10% from its
value without current.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
2
1
0.155 ±0.003
3,94 ±0,08
332X
4
L1
L2
3
2
3
Inductance Internal
code
Value
0.0433 ±0.004
1,10 ±0,10
Recommended
Land Pattern
0.155 ±0.003
3,94 ±0,08
1
4
0.031
0,78
0.103 0.049
2,61 1,25
Dimensions are in
inches
mm
0.174
4,40
3
2
0.060
1,52
45°
typ
0.049
1,25
0.103
2,61
0.174
4,40
Document 1259
Revised 05/04/15
Similar pages