TDK B41693A5158Q001 Aluminum electrolytic capacitors axial-lead and soldering star capacitor Datasheet

Aluminum electrolytic capacitors
Axial-lead and soldering star capacitors
Series/Type:
B41693, B41793
Date:
December 2014
© EPCOS AG 2014. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Axial-lead and soldering star capacitors
B41693, B41793
High reliability up to 150 °C
Applications
Automotive electronics
Features
High vibration stability, special design with high vibration
stability up to 45 g available upon request
High operating temperature capability up to 150 °C
Rated voltage up to 100 V DC
Low ESR
High reliability
High ripple current capability
Long useful life
Storage for up to 15 years at a temperature of up to 35 °C.
If the capacitor is stored for longer than two years, the
operating voltage must be applied for one hour to ensure the
specified leakage current.
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case with insulating sleeve
Negative pole connected to case
Terminals
Axial leads, welded to ensure perfect electrical contact
Soldering star for upright mounting on PCB available
Alternative axial-lead design with double-sided plates for
horizontal mounting available upon request
Taping and packing
Axial-lead capacitors will be delivered in pallet package
Capacitors with d × l ≤ 16 × 30 mm are also available taped
on reel
Soldering star capacitors are packed in cardboard
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 19
B41693, B41793
High reliability up to 150 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
25 ... 100 V DC
1.15 VR
100 ... 4000 µF
10/+30% Q
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL1)
Diameter d (mm)
12
14
16
18
20/21
30
Terminals
Length l (mm) Approx. ESL (nH)
axial
25
22
29
30
21
24
29
34
35
31
33
38
45
50
6
39
49
soldering star
Voltage endurance test
125 °C; VR
2000 h
30
6
7
8
10
35
9
9
11
13
14
49
> 1000 h
> 5000 h
> 15000 h
> 200000 h
25
39
Useful life2)
150 °C; VR; 0.5 IAC,R
125 °C; VR; IAC, R
85 °C; VR; IAC, max
40 °C; VR; 2.1 IAC, R
38
8
Requirements:
∆C/C
≤ 30% of initial value
ESR
≤ 3 times initial specified limit3)
Ileak
≤ initial specified limit
Post test requirements:
∆C/C
≤ 10% of initial value
ESR
≤ 1.3 times of initial specified limit3)
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 2 kHz, displacement amplitude max. 1.5 mm, acceleration max. 20 g, duration 3 × 2 h.
Capacitor mounted by its wire leads at a distance of (6 ±1) mm from
the case and additionally clamped by the case.
IEC climatic category
To IEC 60068-1: 55/125/56 (55 °C/+125 °C/56 days damp heat test)
Detail specification
Sectional specification
Similar to CECC 30301-802
IEC 60384-4
1) If optimum circuit design is used, the values are lower by 30%.
2) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
3) ESRmax at 100 Hz, 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 19
B41693, B41793
High reliability up to 150 °C
B41693, Axial-lead capacitors
Dimensional drawing
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 30
16 × 35
16 × 39
18 × 25
18 × 30
18 × 39
20 × 29
21 × 39
21 × 49
dmax × Imax
mm
12.5 × 30.5
14.5 × 25.5
14.5 × 30.5
16.5 × 30.5
16.5 × 35.5
16.5 × 40
18.5 × 25.5
18.5 × 30.5
18.5 × 40
20.5 × 29.5
21.5 × 40
21.5 × 50
Please read Cautions and warnings and
Important notes at the end of this document.
Approx. weight
g
5.1
5.7
6.8
8.9
10.4
11.7
9.3
11.1
14.7
13.5
20.0
25.0
Page 4 of 19
Packing units (pcs.)
Pallet
Reel
288
450
200
350
200
350
180
250
180
180
160
160
160
140
140
110
B41693, B41793
High reliability up to 150 °C
B41793, Soldering star capacitors
Dimensional drawings
Mounting holes d = 12 mm ... 14 mm
Mounting holes d = 16 mm ... 21 mm
Dimensions, weights and packing units
d×l
mm
12 × 30
14 × 25
14 × 30
16 × 30
16 × 35
16 × 39
18 × 25
18 × 30
18 × 39
21 × 39
21 × 49
dmax × Imax
mm
13.5 × 32
15.5 × 27
15.5 × 32
17.5 × 32
17.5 × 37
17.5 × 41.5
19.5 × 27
19.5 × 32
19.5 × 41.5
22.5 × 41.5
22.5 × 51.5
Please read Cautions and warnings and
Important notes at the end of this document.
c ±0.1
mm
12.5
14.5
14.5
16.5
16.5
16.5
18.5
18.5
18.5
21.5
21.5
e ±0.1
mm
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
Page 5 of 19
Approx. weight
g
5.4
6.1
7.2
9.4
10.9
12.2
9.9
11.8
15.4
21.0
26.0
Packing units
pcs.
480
480
480
300
200
200
300
300
200
324
264
B41693, B41793
High reliability up to 150 °C
Overview of available types
VR (V DC)
25
40
63
75
100
12 × 30
12 × 30
12 × 30
Case dimensions d × l (mm)
CR (µF)
100
14 × 30
150
14 × 30
16 × 30
12 × 30
16 × 30
18 × 25
16 × 35
14 × 30
16 × 39
18 × 39
20 × 29
18 × 39
20 × 29
18 × 39
21 × 39
21 × 39
16 × 39
18 × 30
21 × 39
21 × 49
21 × 49
20 × 29
21 × 49
220
330
470
14 × 25
20 × 29
560
16 × 30
18 × 25
680
16 × 35
820
1000
16 × 30
16 × 30
18 × 25
1200
1500
16 × 39
1800
20 × 29
2000
18 × 39
18 × 39
21 × 39
2200
21 × 49
2700
3000
21 × 39
4000
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 19
B41693, B41793
High reliability up to 150 °C
Case dimensions and ordering codes
VR
V DC
25
40
63
CR
100 Hz
20 °C
µF
470
1000
1000
1500
1800
2000
3000
4000
330
470
680
680
820
1000
1000
1200
1500
2200
2700
100
220
330
330
470
560
680
1000
1200
Case
dimensions
d×l
mm
14 × 25
16 × 30
18 × 25
16 × 39
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
18 × 25
16 × 35
16 × 39
18 × 30
20 × 29
18 × 39
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
18 × 25
16 × 39
20 × 29
18 × 39
21 × 39
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code
Axial pallet
Ordering code
Axial reel
Ordering code
Soldering star
B41693A5477Q001
B41693A5108Q001
B41693B5108Q001
B41693A5158Q001
B41693A5188Q001
B41693A5208Q001
B41693A5308Q001
B41693A5408Q001
B41693A7337Q001
B41693A7477Q001
B41693A7687Q001
B41693B7687Q001
B41693A7827Q001
B41693B7108Q001
B41693A7108Q001
B41693A7128Q001
B41693A7158Q001
B41693A7228Q001
B41693A7278Q001
B41693A8107Q001
B41693A8227Q001
B41693A8337Q001
B41693B8337Q001
B41693A8477Q001
B41693A8567Q001
B41693A8687Q001
B41693A8108Q001
B41693A8128Q001
B41693A5477Q003 B41793A5477Q001
B41693A5108Q003 B41793A5108Q001
B41793B5108Q001
B41793A5158Q001
B41793A5208Q001
B41793A5308Q001
B41793A5408Q001
B41693A7337Q003 B41793A7337Q001
B41693A7477Q003 B41793A7477Q001
B41693A7687Q003 B41793A7687Q001
B41793B7687Q001
B41793A7827Q001
B41793B7108Q001
B41793A7108Q001
B41793A7158Q001
B41793A7228Q001
B41793A7278Q001
B41693A8107Q003 B41793A8107Q001
B41693A8227Q003 B41793A8227Q001
B41693A8337Q003 B41793A8337Q001
B41793B8337Q001
B41793A8477Q001
Page 7 of 19
B41793A8687Q001
B41793A8108Q001
B41793A8128Q001
B41693, B41793
High reliability up to 150 °C
Case dimensions and ordering codes
VR
V DC
75
100
CR
100 Hz
20 °C
µF
100
220
330
470
470
680
1000
100
150
220
470
470
680
1000
Case
dimensions
d×l
mm
12 × 30
16 × 30
16 × 35
18 × 39
20 × 29
21 × 39
21 × 49
12 × 30
14 × 30
16 × 30
18 × 39
20 × 29
21 × 39
21 × 49
Please read Cautions and warnings and
Important notes at the end of this document.
Ordering code
Axial pallet
Ordering code
Axial reel
Ordering code
Soldering star
B41693C0107Q001
B41693C0227Q001
B41693C0337Q001
B41693C0477Q001
B41693D0477Q001
B41693C0687Q001
B41693C0108Q001
B41693B9107Q001
B41693B9157Q001
B41693A9227Q001
B41693A9477Q001
B41693B9477Q001
B41693A9687Q001
B41693A9108Q001
B41693C0107Q003 B41793C0107Q001
B41693C0227Q003 B41793C0227Q001
B41793C0337Q001
B41793C0477Q001
B41793C0687Q001
B41793C0108Q001
B41693B9107Q003 B41793B9107Q001
B41693B9157Q003 B41793B9157Q001
B41693A9227Q003 B41793A9227Q001
B41793A9477Q001
Page 8 of 19
B41793A9687Q001
B41793A9108Q001
B41693, B41793
High reliability up to 150 °C
Technical data
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 25 V DC
470
14 × 25
1000
16 × 30
1000
18 × 25
1500
16 × 39
1800
20 × 29
2000
18 × 39
3000
21 × 39
4000
21 × 49
VR = 40 V DC
330
12 × 30
470
14 × 30
680
16 × 30
680
18 × 25
820
16 × 35
1000
16 × 39
1000
18 × 30
1200
20 × 29
1500
18 × 39
2200
21 × 39
2700
21 × 49
VR = 63 V DC
100
12 × 30
220
14 × 30
330
16 × 30
330
18 × 25
470
16 × 39
560
20 × 29
680
18 × 39
1000
21 × 39
1200
21 × 49
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
IAC,max
10 kHz
105 °C
A
IAC,max
10 kHz
125 °C
A
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
150 °C
A
260
130
120
85
70
70
43
33
1900
900
900
600
600
500
450
320
140
75
70
50
40
42
25
20
102
55
50
39
30
26
21
16
3.6
5.3
5.8
7.4
8.2
7.9
11.8
14.9
2.8
4.2
4.6
5.8
6.4
6.2
9.2
11.7
1.95
2.9
3.15
4.0
4.45
4.3
6.4
8.0
1.0
1.4
1.6
2.0
2.2
4.1
3.2
4.0
320
220
160
150
130
110
115
85
75
50
40
2500
1700
1200
1200
900
700
700
600
500
450
330
150
110
80
75
69
57
65
45
45
26
21
140
102
75
70
65
55
62
44
43
26
21
3.7
4.5
5.2
5.6
6.2
7.2
5.7
8.0
7.9
11.7
14.7
2.9
3.5
4.1
4.4
4.9
5.7
4.5
6.3
6.2
9.2
11.5
2.0
2.45
2.85
3.05
3.4
3.9
3.1
4.35
4.3
6.3
7.9
1.0
1.2
1.4
1.5
1.7
1.9
1.5
2.2
2.1
6.1
3.9
700
320
220
210
150
120
110
70
58
3300
1700
1200
1200
900
630
550
440
380
230
110
80
74
55
45
45
27
22
215
102
75
70
52
44
44
27
22
3.2
4.6
5.3
5.9
7.3
8.1
7.9
11.8
14.7
2.5
3.6
4.2
4.6
5.7
6.4
6.2
9.2
11.5
1.7
2.5
2.9
3.2
4.0
4.4
4.3
6.4
8.0
0.85
1.25
1.45
1.6
2.0
2.2
2.1
3.2
4.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 19
B41693, B41793
High reliability up to 150 °C
Technical data
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 75 V DC
100
12 × 30
220
16 × 30
330
16 × 35
470
18 × 39
470
20 × 29
680
21 × 39
1000
21 × 49
VR = 100 V DC
100
12 × 30
150
14 × 30
220
16 × 30
470
18 × 39
470
20 × 29
680
21 × 39
1000
21 × 49
ESRmax
100 Hz
20 °C
mΩ
ESRmax
100 Hz
40 °C
mΩ
ESRmax
10 kHz
20 °C
mΩ
Zmax
100 kHz
20 °C
mΩ
IAC,max
10 kHz
105 °C
A
IAC,max
10 kHz
125 °C
A
IAC,R
10 kHz
125 °C
A
IAC,max
10 kHz
150 °C
A
600
300
210
140
135
95
65
3000
1500
1050
700
720
500
350
200
100
75
50
45
30
22
190
95
72
48
44
30
22
3.5
5.1
6.3
7.9
8.2
11.5
14.8
2.7
4.0
5.0
6.2
6.4
9.0
11.6
1.85
2.8
3.4
4.3
4.4
6.2
8.0
0.9
1.4
1.7
2.1
2.2
3.1
4.0
750
550
350
170
175
120
85
4000
2900
1900
900
900
670
500
320
230
160
75
78
58
44
310
225
157
73
76
56
43
2.3
3.0
3.7
6.9
6.0
8.5
11.2
1.8
2.4
2.9
5.4
4.7
6.7
8.8
1.3
1.7
2.0
3.7
3.2
4.6
6.1
0.6
0.8
1.0
1.8
1.6
2.3
3.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 19
B41693, B41793
High reliability up to 150 °C
Useful life1)
depending on ambient temperature TA under ripple current operating conditions at VR
Useful life1)
depending on case temperature TC under ripple current operating conditions at VR
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 19
B41693, B41793
High reliability up to 150 °C
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
Equivalent series resistance ESR
versus frequency f
Typical behavior for 470 µF/63V
Impedance Z
versus frequency f
Typical behavior for 470 µF/63 V
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 19
B41693, B41793
High reliability up to 150 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. However, the amount of dangerous materials used in our products is limited to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes are
affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 19
B41693, B41793
High reliability up to 150 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Polarity
Reverse voltage
Mounting
position of screwterminal capacitors
Robustness of
terminals
Mounting of
single-ended
capacitors
Soldering
Soldering,
cleaning agents
Upper category
temperature
Passive
flammability
Safety information
Reference
chapter "General
technical information"
Make sure that polar capacitors are connected
1
with the right polarity.
"Basic construction of
aluminum electrolytic
capacitors"
Voltages of opposite polarity should be prevented 3.1.6
by connecting a diode.
"Reverse voltage"
Screw terminal capacitors must not be mounted
11.1.
with terminals facing down unless otherwise
"Mounting positions of
specified.
capacitors with screw
terminals"
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Avoid external energy, e.g. fire.
8.1
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 19
B41693, B41793
High reliability up to 150 °C
Topic
Safety information
Active
flammability
Maintenance
Avoid overload of the capacitors.
Storage
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply excessive mechanical stress to the
capacitor terminals when mounting.
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Reference
chapter "General
technical information"
8.2
"Active flammability"
10
"Maintenance"
7.3
"Shelf life and storage
conditions"
Reference
chapter "Capacitors with
screw terminals"
"Screw terminals accessories"
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the specifications of the
respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 19
B41693, B41793
High reliability up to 150 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,RMS
IAC,f
IAC,max
IAC,R
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
∆T
TA
TC
TB
t
∆t
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Reststrom
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Gehäusebodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 16 of 19
B41693, B41793
High reliability up to 150 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 19
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 18 of 19
Important notes
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,
SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and
in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.vvv
Page 19 of 19
Similar pages